ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7135-6FB00-0BA1 AQ 2xU ST Two-Channel Voltage Analog Output Module | Original New

Siemens SIMATIC ET 200SP 6ES7135-6FB00-0BA1 AQ 2xU ST Two-Channel Voltage Analog Output Module | Original New

SIEMENS SIMATIC ET 200SP

6ES7135-6FB00-0BA1

AQ 2xU ST analog output module

2 voltage outputs | 0 to 10 V, 1 to 5 V, +/-5 V and +/-10 V | 1 ms cycle | 200 m shielded cable | diagnostics

LEAD TIME: In stock | WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Interfaces
Engineering
Environment
FAQ
Recommend Models
Recommended Products

SIEMENS SIMATIC ET 200SP

AQ 2xU ST

6ES7135-6FB00-0BA1

6ES7135-6FB00-0BA1 is a two-channel voltage analog output module for precise actuator and setpoint control in ET 200SP stations.

Exact configuration

Four configurable voltage ranges cover unipolar and bipolar signals with a 1 ms all-channel cycle and diagnostic support.

Primary engineering value

Compact 15 mm construction combines two voltage outputs, long shielded cable support and configurable substitute values for dependable field control.

Technical Data

OFFICIAL CONFIGURATION DATA

Current Siemens article data for 6ES7135-6FB00-0BA1

AQ 2xU ST analog output module

Complete model	6ES7135-6FB00-0BA1
Product family	SIMATIC ET 200SP
Product type	AQ 2xU ST analog output module
Hardware functional status	From FS21
Firmware version	V1.0.3; firmware update supported
Usable BaseUnits	BU type A0 and A1
Supply voltage	24 V DC; permissible range 19.2 to 28.8 V
Current consumption	80 mA maximum
Power loss	1 W typical
Analog outputs	2 voltage output channels
Output ranges	0 to 10 V, 1 to 5 V, -5 to +5 V and -10 to +10 V
Resolution	15 bit; 13 bit for 1 to 5 V; 16 bit including sign for -10 to +10 V
Cycle time	1 ms minimum for all channels
Load impedance	2 kohm minimum; capacitive load 1 microfarad maximum
Shielded cable length	Up to 200 m
Operational error limit	+/-0.5 percent of output range
Diagnostics	Supply voltage, short circuit, overflow and underflow; substitute values supported
Operating temperature	Horizontal: -30 to +60 deg C; vertical: -30 to +50 deg C
Installation altitude	Up to 5,000 m subject to system restrictions
Dimensions	15 x 73 x 58 mm (W x H x D)
Weight	Approximately 31 g

Inquiry

CONTACT

STELLA

Direct product inquiry

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

CONTROL APPLICATION PROFILE

Applications

Use cases derived from the official module functions

Setpoint generation

Provide voltage references to drives, positioners, converters and process controllers.

Machine control

Generate two independent analog commands from a compact ET 200SP station.

Process automation

Use bipolar or unipolar ranges to match the input requirements of field devices.

Fallback behavior

Configure diagnostics and substitute values for controlled response to communication or channel faults.

Interfaces

SIGNAL AND COMMUNICATION PROFILE

Interfaces

Electrical, network or process-data interfaces

Two voltage channels

The module supports 0 to 10 V, 1 to 5 V, -5 to +5 V and -10 to +10 V ranges.

Resolution

Range-dependent resolution extends to 16 bits including sign for the -10 to +10 V range.

Field load

Voltage outputs require at least 2 kohm load impedance and allow up to 1 microfarad capacitance.

Cable reach

Shielded analog output cables up to 200 m are specified.

Engineering

ENGINEERING WORKFLOW

Engineering

Project, configuration and commissioning checks

BaseUnit

Use an approved A0 or A1 BaseUnit and confirm the two-wire voltage connection.

Range selection

Configure the exact voltage range and validate the receiving device input limits.

Signal quality

Route shielded analog wiring separately from switching conductors and terminate the shield per system guidance.

Commissioning

Test zero, span, polarity, diagnostic limits and substitute values on both channels.

Environment

INSTALLATION AND ENVIRONMENT

Environment

Mechanical, power and approved operating conditions

Mounting envelope

Allow 15 mm width, 73 mm height and 58 mm depth; approximate weight is 31 g.

Power conditions

Provide 24 V DC within 19.2 to 28.8 V and budget 80 mA maximum current and 1 W typical loss.

Temperature limits

Horizontal: -30 to +60 deg C; vertical: -30 to +50 deg C from the specified hardware status.

Altitude

Operation is specified up to 5,000 m subject to ET 200SP system restrictions.

FAQ

PROCUREMENT AND ENGINEERING CHECKS

Six questions specific to 6ES7135-6FB00-0BA1

AQ 2xU ST analog output module

Q1. How can a buyer confirm the quoted unit is exactly 6ES7135-6FB00-0BA1?

Match the complete article number, AQ 2xU ST designation, FS21 status, V1.0.3 firmware, two voltage channels, A0/A1 BaseUnit support and 15 x 73 x 58 mm housing.

Q2. How can New, Used or Refurbished condition be distinguished?

Request dated images of sealed packaging, front and side labels, terminal contacts, rear bus connector and housing. Require disclosure of prior calibration, wiring, overload or repair.

Q3. How should the supplier be verified before procurement?

Verify the legal company, registered address, payment beneficiary and industrial analog-I/O supply history. The quotation must state 6ES7135-6FB00-0BA1 and condition.

Q4. Which specifications should engineers verify before purchase?

Check 24 V DC supply, A0/A1 BaseUnit, required voltage range, receiving-device impedance, 1 ms cycle, 200 m shielded cable limit, diagnostics, accuracy, dimensions and orientation limits.

Q5. What physical evidence should be required before payment?

Require shipment-specific photos or video showing the exact article label, FS status, contacts, connector pins, packaging identifiers and a dated reference linked to the purchase order.

Q6. Can another AQ 2xU suffix replace 6ES7135-6FB00-0BA1?

Not automatically. Output type, ranges, resolution, diagnostics, BaseUnit assignment and firmware support can differ; validate the exact field-device and project requirements.

Recommend Models

RECOMMEND MODEL

Random mixed-brand industrial models

Independent 60-model selection for 6ES7135-6FB00-0BA1

6DR5020	KJ3206X1-BA1	5X00225G01
6DR5020NG000AA0	SPDSI22	KJ3206X1-BA2
3051CD0A	IMHSS03	EJA210E-JMS4G-919E
3051HR5	EJA110E-JMS	A6500-CC
KC3020X1-BA1	CE4003S2B10	KJ1611X1-GA1
SPSEM11	SPASO11/ASO11/IMASO11	IMDSI14
SF810-LOS	mai51	KL3302X1-BA1
AAI543-S50	2SY5016-2SB00	SS4303T01
KJ4001X1-CB1	SPASI23	SS4301T02
MDI50	3051S2CD1A	SE4001S2T2B5
3051CG5A02A	5X00790G01	5X00875G01
SPCIS22	SE5009	SPDSO14
EJA430E-JAS5J-91	6DR5610-0NN00-0AA0DR5	KL2101X1
V18345-101U46100N	V18345-101025100	PR9268/017-100
1C31224G01/1C31227G01	FAU810	5X00063G01
SE4022	3051TG3A	5X00301G01
CE3006	369B1860G0030	1C31234G01
KL2001X1-BB1	LR560	3051DP3A
1B30023H01	GE4000E	1C31199G05
SPASO11	5X00300G02	1B30035H01