ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7138-6EB00-0BA0 TM PTO 2x24V Technology Module

Siemens | SIMATIC ET 200SP

6ES7138-6EB00-0BA0

TM PTO 2x24V technology module with two pulse-train output channels

KEY SELECTION: Two channels, 24 V PTO, 6 digital inputs, 6 digital outputs, up to 200 kHz pulse output and BU type A0.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Protection & Environment
FAQ
Recommend Models
Recommended Products

Siemens | SIMATIC ET 200SP

6ES7138-6EB00-0BA0

TM PTO 2x24V technology module with two pulse-train output channels

Official Configuration TM PTO 2x24V, 2-channel pulse train output module with 24 V operation, three inputs and three outputs per channel.	Core Selling Point High-speed 24 V pulse-train output up to 200 kHz for stepper-drive positioning applications.
Selection Focus Confirm BU type A0, STEP 7 V17 with HSP or later, 24 V load voltage and the exact 6ES7138-6EB00-0BA0 order number.	Procurement Check Verify 15 x 73 x 58 mm dimensions, approximately 45 g weight and TM PTO 2x24V marking on the physical module.

Technical Data

Complete model	6ES7138-6EB00-0BA0
Product family	SIMATIC ET 200SP
Product type	TM PTO 2x24V technology module
Usable BaseUnit	BU type A0
Channels	2 pulse train output channels
Supply voltage	24 V DC
Permissible voltage range	19.2 to 28.8 V DC
Current consumption	50 mA maximum without load
Power loss	1.5 W typical
Digital inputs	6 total, 3 per channel; IEC 61131 type 3
Digital outputs	6 total, 3 per channel
PTO frequency	Up to 200 kHz for 24 V asymmetrical PTO outputs
Output current	0.1 A rated; 0.5 A for CHn.ED
Address space	32 bytes input; 16 bytes output
Dimensions	15 x 73 x 58 mm (W x H x D)
Weight	Approximately 45 g
Operating temperature	-30 to 60 °C horizontal; -30 to 50 °C vertical, observe derating
Installation altitude	Up to 5,000 m with restrictions above 2,000 m
Engineering	STEP 7 TIA Portal V17 with HSP or higher
Diagnostics	Supply monitoring, short-circuit diagnostics, PWR/channel/DIAG LEDs

Inquiry

CONTACT
STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Pulse-Train Output
Two independent channels generate 24 V pulse and direction, count-up/count-down or incremental encoder signals.

High-Speed Operation
The PTO signal interface supports frequencies up to 200 kHz.

Control Feedback
Each channel provides configurable digital inputs and outputs for synchronization, probe and drive-ready functions.

Interfaces

Field Signals
The module supplies six digital inputs and six digital outputs across two channels.

Backplane Integration
It connects through ET 200SP BU type A0 and exchanges 32 input bytes and 16 output bytes.

Diagnostics
PWR, channel and DIAG LEDs support local status and fault identification.

Installation

BaseUnit Selection
Install only on a compatible ET 200SP BU type A0 BaseUnit.

Wiring
Use shielded wiring and observe the published cable-length limits, especially at 200 kHz.

Engineering
Configure in STEP 7 V17 with HSP or later, or the published PROFIBUS/PROFINET GSD versions.

Protection & Environment

Temperature Limits
Observe -30 to 60 °C horizontal and -30 to 50 °C vertical limits with applicable derating.

Electrical Isolation
Channels are isolated from the backplane bus and type-tested at 707 V DC.

Installation Altitude
Operation is specified up to 5,000 m with restrictions above 2,000 m.

FAQ

How can the quoted 6ES7138-6EB00-0BA0 be verified?
Require the complete order number, TM PTO 2x24V designation, two-channel configuration and BU type A0 compatibility on the quotation and label evidence.

How can New, Used or Refurbished condition be distinguished?
Request dated photos of the Siemens label, terminal area, coding element, housing and contact surfaces; scratches, contamination, repaired terminals or prior installation must be disclosed.

How should the supplier be validated?
Verify the supplier legal identity, bank beneficiary and traceable contacts, then require the written offer to repeat 6ES7138-6EB00-0BA0 and TM PTO 2x24V.

What should engineers confirm before procurement?
Confirm 24 V DC supply, two 200 kHz PTO channels, six inputs, six outputs, BU type A0, STEP 7/GSD support and the 15 x 73 x 58 mm envelope.

What evidence should be requested before payment?
Ask for current images showing the full order label, coding element, terminal side, status LEDs and unopened or stated-condition packaging beside the quotation reference.

Can another TM PTO module or suffix replace it?
Not automatically. Compare channel count, signal voltage, output frequency, BaseUnit type, address space and engineering support before approving any substitute.

Recommend Models

6ES7407-0KR02-0AA0	6ES7517-3AP00-0AB0	6ED1055-1MA00-0BA2
6ES7217-1BG40-0XB0	CC-GAOX11	PM5052-T-ETH
AO523	DC523	AAT141
6ES7288-2QT16-0AA0	DO890	DI830
6ES7518-4JP00-0AB0	1756-L72	6ES7321-7BH01-0AB0
CI522-MODTCP	AAI135	AI880A
6ED1052-1HB08-0BA2	6ES7414-3EM07-0AB0	5069-L306ERM
SM560-S-FD-1	6ES7515-2RN03-0AB0	CC-TCF912
6GK7177-1MA20-0AA0	6ES7223-1PL32-0XB0	6ED1052-2FB08-0BA2
DO815	AAI835	VE4005S2B3
6ES7513-1AL02-0AB0	DO814	1769-L36ERM
6ES7288-3AR04-0AA0	DI524	CI871K01
ADV551	6ES7507-0RA00-0AB0	TU847
TB852	TU531	1756-EN2T
6ES7517-3HP00-0AB0	ARM15B	6ES7214-1HG40-0XB0
1756-L61	PM857K01	TU516
6ES7274-1XH30-0XA0	6ES7288-1ST20-0AA1	AFV40D
TU532	PM581-ETH	CC-TAIX11
6ES7288-1CR20-0AA1	1769-L27ERM-QBFC1B	1756-IF16
1756-L62	AAP849	DO561