+86-18159889985 [email protected]

EN EN
EN EN

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
siemens simatic et 200sp ha 6dl1131 6bl00 0ph1 di 32x24vdc-0

SIEMENS

Home >  Products >  SIEMENS

Home > Products SIEMENS

ALL PRODUCTS

Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module
Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module

Siemens SIMATIC ET 200SP HA 6DL1131-6BL00-0PH1 DI 32x24VDC Digital Input Module

Siemens SIMATIC ET 200SP HA DI 32x24VDC HA
Complete Model
6DL1131-6BL00-0PH1
Official Product Description
SIMATIC ET 200SP HA digital input module DI 32x24VDC HA with 32 channels, channel diagnostics and terminal blocks H1/P0.
CORE FEATURE: High-availability 32-channel 24 V DC digital input module with per-channel diagnostics.
LEAD TIME: In stock
WARRANTY: 1 year
Appurtenance:
siemens simatic et 200sp ha 6dl1131 6bl00 0ph1 di 32x24vdc-1
Inquiry
  • Overview
  • Technical Data
  • Inquiry
  • Applications & Features
  • Interfaces
  • Installation
  • Environment
  • FAQ
  • Recommend Models
  • Recommended Products
Product Overview
6DL1131-6BL00-0PH1 is a Siemens SIMATIC ET 200SP HA DI 32x24VDC HA digital input module for high-availability distributed I/O stations.
The module provides 32 digital inputs for 24 V DC signals, channel diagnostics, wire-break detection and channel-specific diagnostic alarms.
It is specified for terminal blocks H1/P0 and uses four input address bytes plus four quality-information bytes in the process image.

Technical Data

Complete model
6DL1131-6BL00-0PH1
Brand
Siemens
Product family
SIMATIC ET 200SP HA
Product type
DI 32x24VDC HA digital input module
Digital inputs
32
Rated input voltage
24 V DC
Permissible voltage range
19.2 to 28.8 V DC
Rated current consumption
11.5 mA
Maximum current consumption
15 mA
Typical power loss
1.6 W
Maximum power loss
2.8 W with all inputs at signal 1
Address space
4 input bytes plus 4 quality-information bytes
Terminal blocks
H1/P0
Two-wire sensor quiescent current
1.5 mA maximum
Cable length
1,000 m shielded; 600 m unshielded
Electrical isolation test
1,500 V DC for 1 minute
Diagnostics
Channel diagnostics, wire break and diagnostic alarm
Dimensions
22.5 x 115 x 138 mm, width x height x depth
Weight
150 g
Operating temperature
-40 to +70 degrees C horizontal; -40 to +60 degrees C vertical
Country of origin
Germany
RoHS conformity
Since 31 May 2018
Official sources
Siemens Industry Mall exact product page; Siemens exact product data sheet; ET 200SP HA DI 32x24VDC Manual A5E48262828

Inquiry

Applications & Features

High channel density
Thirty-two 24 V DC input channels reduce module count in process and infrastructure applications.
Channel diagnostics
Channel-specific diagnostics and alarms support fault localization without using data from a different DI module.
Wire-break monitoring
The exact module supports wire-break diagnostics for configured input channels.
HA station integration
The module is designed for the SIMATIC ET 200SP HA distributed I/O system and its approved terminal-block arrangement.

Interfaces

Input channels
32 digital inputs for 24 V DC field signals.
Terminal blocks
Use the Siemens H1/P0 terminal blocks specified for 6DL1131-6BL00-0PH1.
Process image
Four input bytes and four bytes of quality information are transferred to the controller.
Sensor wiring
Supports field wiring up to 1,000 m shielded or 600 m unshielded under Siemens conditions.
Backplane connection
Communication and module supply are provided through the compatible ET 200SP HA station hardware.

Installation

01 - Verify the article number
Match 6DL1131-6BL00-0PH1 on the quotation, module label, packaging and Siemens record.
02 - Confirm station compatibility
Verify the ET 200SP HA station configuration, firmware, terminal blocks H1/P0 and engineering software support.
03 - Install the terminal assembly
Mount the approved terminal block and seat the module only in the designated ET 200SP HA position.
04 - Wire the inputs
Use the 24 V DC input specifications and approved cable lengths; configure wire-break monitoring only for suitable field circuits.
05 - Parameterize and test
Assign the address area, channel parameters and diagnostics, then test every signal and quality-information bit before commissioning.

Environment

Horizontal operation
-40 to +70 degrees C.
Vertical operation
-40 to +60 degrees C.
Electrical isolation
The specified isolation test voltage is 1,500 V DC for one minute.
Installation system
Use only compatible SIMATIC ET 200SP HA station components and terminal blocks.
RoHS
Siemens lists conformity with substance restrictions since 31 May 2018.

FAQ

Q1. How can the exact quoted 6DL1131-6BL00-0PH1 be verified?
Match the full 6DL1131-6BL00-0PH1 on the quotation, Siemens label and packaging. Confirm DI 32x24VDC HA, 32 channels and terminal blocks H1/P0.
Q2. How can New, Used or Refurbished condition be distinguished?
Request date-marked photos of the label, front connector area, backplane contacts, housing and box. Check for contact wear, terminal marks, repaired plastic, replacement labels and non-original packaging.
Q3. How should supplier legality and reliability be checked?
Verify the supplier legal registration, address, payment account and traceable contact. The offer must state Siemens, 6DL1131-6BL00-0PH1, condition, quantity and ET 200SP HA compatibility.
Q4. Which specifications must engineering confirm before purchase?
Confirm 32 x 24 V DC inputs, H1/P0 terminal blocks, four input plus four QI bytes, cable length, diagnostics, 22.5 x 115 x 138 mm size and the planned ET 200SP HA station release.
Q5. What physical evidence should be requested before payment?
Ask for a date-marked photo set showing the complete model label, terminal-block interface, backplane contacts, housing seals and package label. The -0PH1 suffix must be readable.
Q6. Can another DI 32x24VDC suffix replace 6DL1131-6BL00-0PH1?
Not automatically. Suffixes can change terminal-block assignment, coating, approval or hardware status. Compare the exact Siemens record and station configuration before approving any substitute.

Recommend Models

SCP451-51-S1
WMZH3D16T
HC-4E
FE-USI-0002
PEV-1/4-B
U1404393
GE CR2810A14DE
74115-0115
9001-GA-13
MS4-FRM-FRZ
AR420A
UMC-B4-05
10046910
RJ45S 4413-2M
7VK61
EASYGEN-3400-5 /P2 8440-2078
35A-AAA-DBJ-1KD
WMZT2D04T
XWT-ID16
D-LZ100 UL-l1/M2/96EX/NPT
SS020368 .008CL
B21S
NDLPR-164C
WMZT2D20T
2945B
200-530-025-014
082SS53BM
FYAA3J2-2
Focus 3D X330
WMZS2D08
F128
TN-200HL
CTTPR-2020K-16
GV2MC02
P28873-1
GE 673D0515-415-27
ABB NBMNAAABNEC1BNN1XF
LC1K0910G7
ABB DSF615
364215000
750-1406
NGCMA10AX01M
KL3045
CR120 B04022
700-BX220A1
SL1-B
1614-0878-00
DC5-24V
6ES7390-5AA00-0AA0
KL1304
4T-4-PSG 3M/S1584/SV
4116650
FOD-021-L
ADA-8XR
6422494G10
A1SD51S
X1163SVMG4
ABB CAL5-11
TK-E2 TK51E 7-11A
KGJP2107 7555GR07

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000