ALL PRODUCTS

Siemens SIMATIC HMI KTP700 Basic 6AV2123-2GB03-0AX0 7-Inch Key Touch Panel | Original New

Siemens SIMATIC HMI KTP700 Basic 6AV2123-2GB03-0AX0 7-Inch Key Touch Panel | Original New

Siemens SIMATIC HMI KTP700 Basic

6AV2123-2GB03-0AX0

Basic Panel with key and touch operation, 7-inch TFT widescreen display and PROFINET interface.

KEY SPEC: 800 x 480 pixels; 65,536 colors; 24 V DC; one Industrial Ethernet interface; front IP65.

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
I/O Functions
Electrical Data
Installation
Environment
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC HMI KTP700 Basic 6AV2123-2GB03-0AX0

7-Inch Key and Touch Operator Panel

The KTP700 Basic is a compact SIMATIC HMI panel for local machine and plant operation. It combines a 7-inch widescreen touch display, physical function keys and PROFINET communication in a panel designed for control-cabinet installation.

Visualization and Operation The LED-backlit TFT widescreen provides 800 x 480 pixel resolution and 65,536 colors. The 154.1 x 85.9 mm display area supports touch operation, function keys and onscreen numeric and alphanumeric keyboards.	Communication and Engineering One Industrial Ethernet interface provides PROFINET communication for controller networking. The panel is configurable from WinCC Basic V13 or STEP 7 Basic V13 and supported later engineering releases.
Electrical Data Rated supply is 24 V DC with an allowed range of 19.2 to 28.8 V DC. Rated current consumption is 230 mA, typical active power input is 5.5 W, and available user data memory is 10 Mbyte.	Mechanical Integration The housing front measures 214 x 158 mm. Prepare a 198 x 142 mm panel cutout and allow 39 mm mounting depth. The panel weight is approximately 780 g without packaging.
Protection and Environment When correctly installed, the front is rated IP65 and NEMA Type 4/4X, while the rear is IP20. Vertical operation is specified from 0 to 50 °C; at the maximum permitted tilt angle, the upper limit is 40 °C.	Model Selection Check Confirm the complete order number 6AV2123-2GB03-0AX0, the PROFINET interface, project resolution, engineering software compatibility, mounting cutout and 24 V DC power requirements before procurement.

Technical Data

Complete model	6AV2123-2GB03-0AX0
Product family	Siemens SIMATIC HMI Basic Panels
Product type	KTP700 Basic key and touch operator panel
Display	7-inch TFT widescreen, LED backlighting
Display area	154.1 x 85.9 mm
Resolution	800 x 480 pixels
Colors	65,536
Operation	Touch screen with function keys and onscreen numeric/alphanumeric keyboard
Interface	1 Industrial Ethernet / PROFINET interface
Supply voltage	24 V DC; permissible range 19.2 to 28.8 V DC
Rated current	230 mA
Active power input	Typically 5.5 W
User memory	10 Mbyte
Front dimensions	214 x 158 mm
Mounting cutout	198 x 142 mm
Mounting depth	39 mm
Dimensions	214 x 158 x 39 mm
Weight	780 g without packaging
Protection rating	Front IP65; rear IP20; front NEMA Type 4 and 4X
Operating temperature	0 to 50 °C vertical; 0 to 40 °C at maximum tilt angle
Storage temperature	-20 to 60 °C
Configuration software	WinCC Basic V13 or STEP 7 Basic V13 and later supported releases

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

I/O Functions

Operator control

KTP700 Basic combines a resistive touch screen with physical function keys and onscreen numeric and alphanumeric keyboards.

Visualization

The 7-inch LED-backlit TFT presents 800 x 480 pixels and 65,536 colors for machine and plant visualization.

Engineering and communication

One Industrial Ethernet interface provides PROFINET communication; the panel is configured from WinCC Basic V13 or STEP 7 Basic V13.

Electrical Data

DC supply

The panel uses 24 V DC and accepts 19.2 to 28.8 V DC. Rated current consumption is 230 mA.

Power demand

Typical active power input is 5.5 W; commissioning must account for the specified 0.2 A²s inrush I²t.

Project memory

The official specification provides 10 Mbyte of user data memory for the HMI project and associated data.

Installation

Panel cutout

Prepare a 198 x 142 mm mounting cutout for the 214 x 158 mm front frame; the stated mounting depth is 39 mm.

Mounting orientation

Portrait and landscape installation are supported. Ensure the rear space and clearances meet the Basic Panels operating instructions.

Network and power wiring

Connect the 24 V DC supply and Industrial Ethernet/PROFINET cable according to Siemens grounding, shielding and strain-relief requirements.

Environment

Front and rear protection

When correctly installed, the front is IP65 and NEMA Type 4/4X; the rear is IP20 and must remain inside the control enclosure.

Temperature range

Vertical operation is specified from 0 to 50 °C. At the maximum permitted tilt angle, the upper limit is 40 °C.

Storage and transport

The official storage and transport temperature range is -20 to 60 °C. Prevent condensation and comply with the manual environmental limits.

FAQ

1. How can a quotation be verified as the exact KTP700 Basic model?

Check that all documents and label photos show 6AV2123-2GB03-0AX0. Confirm the 7-inch 800 x 480 key/touch panel with one Industrial Ethernet interface.

2. How can a buyer distinguish new, used and refurbished KTP700 Basic panels?

Request current photos of the front membrane, touch surface, rear housing, mounting clips and label. Scratches, key wear, screen marks or replaced seals indicate previous use or repair.

3. How should the supplier of 6AV2123-2GB03-0AX0 be evaluated?

Verify the legal entity, address, quotation trail, beneficiary account and serial-number evidence. The supplier should provide traceable photos of the exact panel before payment.

4. Which engineering details must be checked before ordering?

Confirm 24 V DC supply, 800 x 480 project resolution, PROFINET network, 198 x 142 mm cutout, 39 mm mounting depth and compatibility with the installed WinCC or STEP 7 engineering version.

5. What physical proof should be requested before funds are released?

Obtain dated photos or video showing the complete Siemens label, order number, front glass, function keys, Ethernet and power connectors, rear enclosure and packaging.

6. Can another KTP700 suffix replace 6AV2123-2GB03-0AX0?

No substitution should be assumed. Interface type, display generation, engineering software, cutout and firmware support can differ; engineering must approve the exact alternate part.

Recommend Models

PM582-ETH	VE4035S2B1	6ES7288-2QT16-0AA0
AAR181	1756-IB32	ANB10S
TU837	1756-L84E	5069-L330ERM
AEA4D	PM571-ETH	DI811
6ES7534-7QE00-0AB0	VE3051C1	6ES7531-7NF10-0AB0
AI810	6ED1052-1FB08-0BA2	TU531
6ES7336-1HE00-0AB0	6ES7215-1AF40-0XB0	6ES7288-1SR40-0AA1
6ES7390-1AE80-0AA0	6ES7531-7QD00-0AB0	6ES7288-1CR20-0AA0
TB851	CC-PDIL51	1769-L30ER
CC-TDOB01	DI561	6GK7243-5DX30-0XE0
AAI143	1756-DHRIO	6ES7288-1ST30-0AA1
6ES7331-7RD00-0AB0	SS823	SS832
KJ4001X1-BA2	PM5012-R-ETH	AX522
6ES7211-1AE40-0XB0	ADV561	6ES7231-4HD32-0XB0
AAV144	6ES7517-3AP00-0AB0	1756-L61
AO820	6ES7288-1SR30-0AA1	ADV151
6ES7221-1BF32-0XB0	DP820	AAP149
VE3012	ADV157	ANB10D
AAT141	TB521-ETH	6ES7505-0KA00-0AB0
6ES7407-0DA02-0AA0	6ES7523-1BL00-0AA0	PM865K01