ALL PRODUCTS

SIEMENS SIMATIC S7-1500 6ES7590-1AF30-0AA0 530 mm Mounting Rail | Original New

SIEMENS SIMATIC S7-1500 6ES7590-1AF30-0AA0 530 mm Mounting Rail | Original New

SIEMENS · SIMATIC S7-1500

6ES7590-1AF30-0AA0

530 mm mounting rail with grounding screw and integrated DIN rail

LENGTH 530 mm · approx. 20.9 in	MATERIAL Aluminum
SIZE 530 × 155 × 16 mm	WEIGHT Approx. 1,034 g
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic s7 1500 6es7590 1af30 0aa0 mounting rail-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

PRODUCT OVERVIEW

SIMATIC S7-1500 Mounting Rail

530 mm system rail for S7-1500 and ET 200MP assemblies

The SIEMENS 6ES7590-1AF30-0AA0 is a 530 mm SIMATIC S7-1500 mounting rail. The aluminum rail includes a grounding screw and an integrated DIN rail for mounting incidentals such as terminals, automatic circuit breakers, and relays.

System mounting base
Provides the mechanical rail used to install SIMATIC S7-1500 and ET 200MP modules in a control-cabinet assembly.

Integrated accessory rail
The built-in DIN rail supports incidentals such as terminals, automatic circuit breakers, and relays alongside the automation equipment.

Defined enclosure fit
The official dimensions are 530 × 155 × 16 mm, allowing cabinet planners to verify available mounting space before procurement.

Technical Data

OFFICIAL PRODUCT DATA

Technical Data

Verified for the complete article number shown below

Complete model	6ES7590-1AF30-0AA0
Product family	SIMATIC S7-1500 mounting rails
Product type	530 mm mounting rail with drill holes
Compatible system	SIMATIC S7-1500 / ET 200MP
Material	Aluminum
Surface design	Galvanically isolated
Integrated accessory rail	DIN rail for terminals, automatic circuit breakers, and relays
Grounding hardware	Grounding screw included
Dimensions (W × H × D)	530 × 155 × 16 mm
Weight	Approx. 1,034 g
Rail length	530 mm (approx. 20.9 inch)
Protective conductor connection	PE connection element and grounding point provided by the rail system

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

CONTROL CABINET ASSEMBLY

Applications

Mechanical platform for modular automation hardware

S7-1500 stations
Use the rail as the mounting base for SIMATIC S7-1500 central automation assemblies.

ET 200MP stations
The same rail system supports ET 200MP distributed I/O assemblies documented by Siemens.

Cabinet incidentals
Mount terminals, automatic circuit breakers, and relays on the integrated DIN rail where the cabinet design requires them.

Active backplane arrangements
A 530 mm rail can carry a suitably sized active backplane bus while leaving space for the interface module and fixing screws.

Construction

MECHANICAL DESIGN

Construction

Rail material, profile, and integrated mounting features

Rail material	Aluminum
Overall dimensions	530 × 155 × 16 mm
Approximate weight	1,034 g
Surface design	Galvanically isolated
Main equipment mounting	SIMATIC S7-1500 / ET 200MP rail profile
Accessory mounting	Integrated DIN rail
Grounding provision	Grounding screw included
Drill-hole version	530 mm mounting rail with drill holes

Installation

MOUNTING AND PE CONNECTION

Installation

Official assembly checks for safe cabinet installation

Plan the cabinet position
Allow the specified 530 × 155 × 16 mm envelope and provide sufficient space for modules, wiring, and accessory devices.

Fasten the rail
Secure the rail to the cabinet mounting surface using the prepared drill-hole arrangement and the applicable cabinet hardware.

Attach protective earth
Use a protective conductor of at least 10 mm² with an M6 ring cable lug at the rail PE connection.

Assemble the PE hardware
Install the bolt, spacer, ring terminal, flat washer, lock washer, and nut in the documented order; tighten the nut to 4 Nm.

Verify the finished assembly
Confirm mechanical fixation, protective-conductor continuity, module seating, and clearance before commissioning.

Selection

ARTICLE-NUMBER CHECK

Selection

Confirm rail length and system arrangement before ordering

Confirm the full order code
The quotation, package label, and product documentation should all show 6ES7590-1AF30-0AA0.

Check the required rail length
This article is the 530 mm version; Siemens also lists different rail lengths under different complete article numbers.

Allow for the complete station
Size the rail for the power supply or interface module, CPUs or I/O modules, fixing screws, wiring space, and any active backplane bus.

Confirm accessory demand
Verify whether the integrated DIN rail will carry terminals, circuit breakers, relays, or other specified incidentals.

Review cabinet grounding
Confirm the selected PE connection method complies with the cabinet design and applicable electrical standards.

FAQ

BUYER AND ENGINEER CHECKLIST

FAQ

Six model-specific questions for supplier and product verification

Q1 · How can a buyer verify the exact mounting rail being quoted?

Match 6ES7590-1AF30-0AA0 on the quotation, package label, and current product photographs. The item should be the 530 mm S7-1500 mounting rail with drill holes, grounding screw, and integrated DIN rail.

Q2 · What evidence helps distinguish new stock from a previously installed rail?

Request time-stamped photographs of the full rail, article label, drill holes, module-contact surfaces, DIN profile, PE hardware, and packaging. Scratches around fixing points, distorted profiles, drilled modifications, or missing grounding parts require clarification.

Q3 · How can procurement assess whether the supplier understands this item?

A competent supplier should identify it as an aluminum SIMATIC S7-1500 / ET 200MP mounting rail and confirm the official 530 × 155 × 16 mm dimensions, approximate 1,034 g weight, and included grounding screw.

Q4 · Which engineering checks are required before purchase?

Confirm the 530 mm cabinet space, planned module lineup, wiring clearance, drill-hole positions, active-backplane length if used, integrated DIN-rail accessories, and protective-earth arrangement.

Q5 · What should be requested before payment?

Ask for current images showing the complete article number, full rail length, both ends, drill holes, DIN profile, grounding hardware, packaging, and the agreed quantity. Supplier identity and payment beneficiary details should also be independently verified.

Q6 · Can a similar 6ES7590 mounting-rail suffix replace this article?

Not automatically. Other complete article numbers represent different rail lengths or construction variants. Confirm that the substitute provides the required 530 mm length, drill-hole arrangement, cabinet fit, and space for the intended module configuration.

Recommend Models

CROSS-BRAND SELECTION

Recommend model

MO11AA0E3-01R	DH227	TMS 1308 CE A PN 318312
C73195-A100-B65-1	PC00351.H	FSDDR0322 F400
SA7-701008-2 2-000009V3	1004UA03 DK-FLEXDK/CN3/CN5/CK3 871-238-012	R7847C1005
Q61P	DRC820F 550820	MAG808S
HCD5MIH 720P	SLE46C-40.K4/4P-M12	STD150
1028643 SP1000	SLA-440-ALER	EMG125-B24 2947996
FTDR-M2-WSB	6ES7195-7KF00-0XA0	ZA10341
UAX-008 8-02-0049/2	901-R510-WW00	XP2-GKDPB
ABB TU508-ETH A01SAP414000R0001	6ES7322-8BH01-0AB0	1230/stb aci1230
40R02-5	PRO32OUT	JL325A
CPM08-BN	19D903536P1	H7080B2103
RM7823	LV434011	ODC15-IDW
IRC-2000-5	Vbbc3	ABB SV/S30.160.1.1 2CDG110144R0011
DRC820F	ibaPADU-S-B4S	ABB SA/S 8.6.1
DI-16 SXWDI16XX10001	7NG4021-6AA33-0NN0	009SMA
837447005 737 839-001 G00	AP5027-30	PFD-402-25
AB7702-B MB100 9-28VDC	MX62	EMBCT23
GE CRS-10-MB	EZC100N3015	802111A
TLK96	6ES7326-1BK02-0AB0	ABB DO562 / 1SAP230900R0000
7311repartidor	S4-720	E3003-61058