ALL PRODUCTS

Siemens SIMATIC S7-1500F 6ES7516-3FP03-0AB0 CPU 1516F-3 PN/DP fail-safe central processing unit with 3 MB program and 7.5 MB data memory

Siemens SIMATIC S7-1500F 6ES7516-3FP03-0AB0 CPU 1516F-3 PN/DP fail-safe central processing unit with 3 MB program and 7.5 MB data memory

Siemens | SIMATIC S7-1500F

6ES7516-3FP03-0AB0

CPU 1516F-3 PN/DP fail-safe central processing unit with 3 MB program and 7.5 MB data memory

KEY SELECTION: Two PROFINET interfaces, one PROFIBUS interface, 6 ns bit processing and required SIMATIC Memory Card.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

dp fail safe central processing unit with 3 mb program and 7 5 mb data memory6es7516 3fp03 0ab0-1

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Protection & Environment
FAQ
Recommend Models
Recommended Products

Siemens SIMATIC S7-1500F

6ES7516-3FP03-0AB0

CPU 1516F-3 PN/DP fail-safe central processing unit with 3 MB program and 7.5 MB data memory

Official Configuration Two PROFINET interfaces, one PROFIBUS interface, 6 ns bit processing and required SIMATIC Memory Card.	Core Selling Point High-performance fail-safe S7-1500F CPU with integrated PROFINET and PROFIBUS connectivity.
Selection Focus Confirm FS04 hardware status, firmware V4.1, CPU 1516F-3 PN/DP designation and required SIMATIC Memory Card.	Procurement Check Match the exact complete model and verify the 70 x 147 x 129 mm dimensions, 469 g weight and three-interface architecture.

Technical Data

Complete model	6ES7516-3FP03-0AB0
Product family	SIMATIC S7-1500F
Product type	CPU 1516F-3 PN/DP fail-safe central processing unit
Hardware / firmware	FS04 / V4.1
Supply voltage	24 V DC rated; permissible 19.2 to 28.8 V DC
Rated / maximum current	0.69 A / 1.08 A
Work memory	3 MB program; 7.5 MB data
Load memory	SIMATIC Memory Card required; up to 32 GB
Interfaces	2 PROFINET interfaces and 1 PROFIBUS interface
First PROFINET interface	X1, 2 RJ45 ports with integrated switch and IRT
Second PROFINET interface	X2, 1 RJ45 port, RT
Bit processing time	6 ns typical
Dimensions	70 x 147 x 129 mm (W x H x D)
Weight	Approximately 469 g
Operating temperature	-30 to 60 °C horizontal; -30 to 40 °C vertical
Storage / transport temperature	-40 to 70 °C
Safety performance	SIL 3 values published by Siemens
Engineering	STEP 7 TIA Portal V21 for firmware V4.1

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Fail-Safe Control

CPU 1516F-3 PN/DP combines standard and fail-safe control functions in the SIMATIC S7-1500F platform.

Processing Performance

Typical execution time is 6 ns for bit operations, 7 ns for word operations, 9 ns for fixed-point and 37 ns for floating-point operations.

Memory Resources

Integrated work memory provides 3 MB for program and 7.5 MB for data; a SIMATIC Memory Card is required.

Interfaces

PROFINET X1

The first interface provides two RJ45 ports, an integrated switch, PROFINET IRT and media-redundancy functions.

PROFINET X2

The second interface provides one RJ45 port for PROFINET RT communication.

PROFIBUS

One integrated PROFIBUS interface supports the CPU 1516F-3 PN/DP communication architecture.

Installation

Power Connection

Provide 24 V DC within the official 19.2 to 28.8 V permissible range and account for rated and maximum input current.

Mechanical Installation

Allow for a 70 x 147 x 129 mm module and approximately 469 g weight in the S7-1500 rack.

Engineering Setup

Use the required SIMATIC Memory Card and a compatible STEP 7 TIA Portal version for the installed firmware.

Protection & Environment

Temperature by Orientation

Horizontal installation supports -30 to 60 °C; vertical installation supports -30 to 40 °C, with the published display limits.

Storage and Altitude

Storage and transport are specified from -40 to 70 °C; installation altitude is rated up to 5,000 m with applicable restrictions.

Functional Safety

Siemens publishes SIL 3 safety performance values; approvals and certificates must be checked against the cited Siemens support entry.

FAQ

How can a buyer verify the exact 6ES7516-3FP03-0AB0?

Require the full order number, CPU 1516F-3 PN/DP designation, FS04 hardware status and firmware identification on the label and quotation.

How can New, Used or Refurbished condition be distinguished?

Request dated label, housing, display, terminal and interface photos; also require disclosure of operating history, repairs and firmware changes.

How should the Siemens supplier be validated?

Verify legal identity, bank beneficiary and traceable contact data, and require a written offer that repeats 6ES7516-3FP03-0AB0 and its fail-safe CPU description.

What should engineers confirm before procurement?

Confirm 24 V DC supply, 3 MB/7.5 MB memory, required SIMATIC Memory Card, two PROFINET plus one PROFIBUS interface, TIA Portal compatibility and mounting orientation limits.

What evidence should be requested before payment?

Ask for current photos of the complete label, FS04 marking, front display, X1/X2 Ethernet ports, PROFIBUS connector area and sealed packaging with the quotation reference.

Can 6ES7516-3FN02-0AB0 or another suffix replace this CPU?

Not automatically. Hardware status, firmware, fail-safe approvals, memory and interface configuration must be validated in the project before any substitution.

Recommend Models

DO810	CC-PAIX01	6ES7417-4HT14-0AB0
6ES7231-5PD32-0XB0	ARM15A	1756-L75
6ES7331-7RD00-0AB0	PM5012-R-ETH	6ES7288-1SR60-0AA1
6ES7513-1FL02-0AB0	5069-L330ERMS2	TU849
SM560-S-FD-4	CC-PDOB51	6ED1055-1NB10-0BA2
AAR145	1756-IB16D	DO890
1756-OW16I	AKB331	ATSS3S
1756-IB32	SM560-S	1756-L83ES
VE4005S2B4	1756-OA16	KJ3221X1-BA1
5069-L340ERMS2	DO815	DI525
6ES7288-2DT32-0AA0	1756-OB16E	6ES7288-1ST30-0AA1
AO820	6ED1052-1HB08-0BA2	AAB841
CI501-PNIO	TU838	6GK7242-7KX30-0XE0
6ES7223-1BL32-0XB0	PM867K01	5069-L306ERMS2
DI830	TU834	CM577-ETH
6ES7221-1BF32-0XB0	TU836	AAP149
AFV30S	6ES7416-3FS07-0AB0	AO845A
TU840	A2FV70S	AAV542
1769-L24ER-QB1B	KJ3002X1-BB1	6ES7288-3AE04-0AA0
PM582-ETH	1756-L64	DO524