+86-18159889985 [email protected]

EN EN
EN EN

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
abb ac500 cm578 cn canopen master communication module-0

ABB Advant OCS

Home >  Products >  ABB >  ABB Advant OCS

Home > ABB Advant OCS

ALL PRODUCTS

ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module
ABB AC500 CM578-CN CANopen Master Communication Module

ABB AC500 CM578-CN CANopen Master Communication Module

ABB | AC500
CM578-CN
CANopen Master Communication Module for the AC500 automation platform
CONFIGURATION: CANopen master | 10 kbit/s to 1 Mbit/s | 5-pin COMBICON | PM57x, PM58x and PM59x CPUs
LEAD TIME: In stock
WARRANTY: 1 year
Appurtenance:
abb ac500 cm578 cn canopen master communication module-1
Inquiry
  • Overview
  • Technical Data
  • Inquiry
  • Construction
  • Installation
  • Selection Guide
  • Environment
  • FAQ
  • Recommend Models
  • Recommended Products
ABB AC500 CM578-CN CANopen Communication Module
Exact configured model: CM578-CN
Official product identity
CM578-CN is the standard ABB AC500 CANopen master communication module, order number 1SAP170800R0001. It adds a CANopen fieldbus interface through the communication-module slot of a compatible terminal base.
Configured geometry
The module is approximately 28 mm wide, 135 mm high and 84.5 mm deep according to the official dimensional drawing. Typical weight is approximately 150 g.
Connection package
A pluggable 5-pin COMBICON connector provides the CANopen fieldbus connection. The module supports 10 kbit/s to 1 Mbit/s and is powered through the communication-module interface.
Installation focus
Install CM578-CN on a compatible TB5xx terminal base with a PM57x, PM58x or PM59x CPU, observe the standard AC500 mounting-temperature limits, and house the IP20 assembly appropriately.
Procurement check
Match every segment of CM578-CN. Match CM578-CN and order number 1SAP170800R0001. Do not substitute the CM578-CN-XC version unless the XC environmental specification is required and approved.

Technical Data

Official configuration and specifications
Complete model
CM578-CN
Product family
ABB AC500
Product type
CANopen master communication module
Order number
1SAP170800R0001
Fieldbus
CANopen
Transmission rate
10 kbit/s to 1 Mbit/s
Fieldbus connector
Pluggable COMBICON, 5-pin
Processor
EC1, 160 pins
Compatible CPUs
PM57x, PM58x and PM59x
Compatible terminal bases
All TB5xx
Internal power supply
Via the communication-module interface of the terminal base
Current from 24 VDC CPU terminal-base supply
50 mA typical
Current over communication-module bus
290 mA typical
Memory
256 kB internal RAM; 512 kB external flash for firmware
Dimensions
Approximately 28 x 135 x 84.5 mm (W x H x D)
Weight
Approximately 150 g
Protection rating
IP20
Operating temperature
0 to +60 °C horizontal; 0 to +40 °C vertical
Storage temperature
-40 to +70 °C
Humidity
Maximum 95%, noncondensing
Product life-cycle phase
Classic
Official document
Data Sheet 3ADR010018 Rev. 2, pages 1-4

Construction

CANopen interface
The module provides a CANopen master fieldbus interface with selectable transmission rates from 10 kbit/s to 1 Mbit/s.
Processing and memory
An EC1 processor uses 256 kB internal RAM and 512 kB firmware flash.
Terminal-base interface
Power and data are supplied through the communication-module interface and 8 kB dual-port memory.
Field connector
The network connection uses a removable 5-pin COMBICON connector.

Installation

Compatible platform
Use PM57x, PM58x or PM59x CPUs and a TB5xx terminal base.
Mounting orientation
Standard AC500 limits are 0 to +60 °C horizontally and 0 to +40 °C vertically.
Network wiring
Wire the CANopen bus to the 5-pin COMBICON connector according to the approved network design and termination scheme.
Enclosure
The module is IP20 and requires installation in a suitable industrial enclosure.

Selection Guide

CM578-CN
Standard AC500 CANopen master communication module.
Order number
1SAP170800R0001.
Fieldbus
CANopen at 10 kbit/s to 1 Mbit/s.
CPU compatibility
PM57x, PM58x and PM59x.
Terminal base
All TB5xx terminal bases.
Standard vs. XC
CM578-CN is the standard version; CM578-CN-XC is a separate XC article.
Lifecycle
The official data sheet lists this article in the Classic phase.

Environment

Operating temperature
0 to +60 °C for horizontal mounting; 0 to +40 °C for vertical mounting.
Storage and transport
-40 to +70 °C.
Humidity and altitude
Maximum 95% noncondensing; operating air pressure above 800 hPa below 2000 m.
Protection
IP20; use a suitable enclosure and keep connectors protected from contamination.

FAQ

Q1. How do I verify that the quotation is for the exact module?
Require CM578-CN and order number 1SAP170800R0001 on the quotation, label and packing evidence. Confirm the standard CANopen master version rather than CM578-CN-XC.
Q2. How can New, Used and Refurbished condition be distinguished?
Request current photographs of the product label, 5-pin COMBICON connector, housing, terminal-base interface and mounting features. Check for insertion marks, connector damage, contamination or changed labels.
Q3. How can the supplier be checked for legitimacy and reliability?
Verify company registration, address, bank beneficiary and traceable contacts. Require exact-model photographs and compare the order number with ABB Data Sheet 3ADR010018 Rev. 2.
Q4. Which specifications must an engineer confirm before purchase?
Confirm CANopen master functionality, 10 kbit/s to 1 Mbit/s rate, 5-pin COMBICON wiring, PM57x/PM58x/PM59x CPU compatibility, TB5xx base and available power budget.
Q5. What physical evidence should be requested before payment?
Ask for dated photographs or video showing CM578-CN, 1SAP170800R0001, the complete connector, terminal-base interface, housing condition and the approximately 28 x 135 x 84.5 mm dimensions.
Q6. Can CM578-CN-XC or another communication module replace it?
Not automatically. CM578-CN-XC is a different XC article, and another CM5xx module may use a different fieldbus. Verify environmental requirements, connector and CPU configuration before substitution.

Recommend Models

60 randomly selected industrial automation models
T8461C
Edge Controller IC695CPL410
Emerson A6120
MVME5500
1761-L32BWA
CC-PUIO31
MPC4 200-510-074-113
IC695CPU315
Yokogawa AAI543-S50/K4A00
CC-PDIH01
1769-L23E-QBFC1B
6 ACS355-03E-15A6-4
80190-480-01-R
IEMMU01
ProSoft PLX31-PND-MBS4
INNPM22
SPASI23
TRICONEX 8312
X-COM 01 001
TRICONEX 3636R
CC-PCNT02
B 5X00453G01 Remote I/O Node Controller
ABB SD833
1C31122G02/1C31125G2
ProSoft MVI69E-MBS
IC693MDL742
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW
IC660BBD025
TDM4.1-020-300-W0
X20CP0483
Tricon 3008
T8451C
KDA3.3-100-3-A00-W1
DS200SDCCG1A
RH916FN
F3316
Yokogawa S2MMM843-SS1130
EPRO MMS6310
X-CPU 01
RLC16 200-570-000-014
TRICONEX 3623
AI880A
3HAC023020-003
IC755CSS10CDA
PM554-TP-ETH
VersaMax CPU IC200CPUE05
T8151C
TRICONEX 3703E
2711R-T4T
IEMMU21
DS200LDCCH1A
160-BA04NSF1
FBM246
2711P-T15C21D8S
SS4303T01
F3 DIO 20/8 02
2711R-T10T
A 5X00419G02 Ethernet Link Controller
EPRO MMS6312
3HAC029896-001

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000