ALL PRODUCTS

ABB AC500-eCo S500-eCo DO562 16-channel digital output module with 24 V DC transistor outputs | Original New

ABB AC500-eCo S500-eCo DO562 16-channel digital output module with 24 V DC transistor outputs | Original New

ABB AC500-eCo S500-eCo

DO562

16-channel digital output module with 24 V DC transistor outputs.

KEY SPECS: 16 DO; 24 V DC; 0.5 A per channel; 8 A group maximum.

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
I/O Functions
Electrical Data
Installation
Environment
FAQ
Recommend Models
Recommended Products

ABB AC500-eCo S500-eCo DO562

The DO562 is an S500-eCo digital output module with sixteen transistor channels. It is powered through the I/O bus and uses a separate 24 V DC process supply for the field outputs.

Technical Data

Complete model	DO562
Order number	1SAP230900R0000
Product family	ABB AC500-eCo / S500-eCo
Product type	Digital output module
Digital outputs	16 transistor outputs, 24 V DC
Rated output current	0.5 A per channel; 8 A maximum for the group
Process supply voltage	24 V DC via UP and ZP terminals
Current consumption	Approx. 10 mA from the CPU or interface supply; 20 mA plus output load via UP
Output delay	50 us from 0 to 1; 200 us from 1 to 0
Output protection	External 3 A fast fuse per channel; outputs are not short-circuit or overload protected
Terminal connection	Removable 9-pin and 11-pin terminal blocks
Dimensions	Approx. 34 x 135 x 84.2 mm (W x H x D)
Weight	Approx. 125 g
Mounting	DIN rail or screw mounting; horizontal or vertical
Operating temperature	0 to 60 C horizontal; 0 to 40 C vertical
Storage temperature	-40 to 70 C
Ingress protection	IP20
Maximum cable length	500 m shielded; 150 m unshielded

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

I/O Functions

Output channels

Sixteen transistor outputs O0 to O15 form one isolated 24 V DC group with 0.5 A maximum per channel.

Signal indication

Sixteen yellow LEDs display the individual output states when the module is powered through the I/O bus.

Data exchange

The module uses two output bytes for the sixteen digital channels.

Electrical Data

Process supply

UP terminal 19 accepts +24 V DC and ZP terminal 20 provides the 0 V reference for all outputs.

Group capacity

The sixteen-channel group supports up to 8 A total. Lamp loads are limited to 5 W per channel.

External protection

The outputs are not internally protected against short circuit or overload; ABB specifies a 3 A fast fuse for each channel.

Installation

Terminal blocks

O0 to O7 use the 9-pin block; O8 to O15, UP and ZP use the 11-pin block. Terminal blocks are ordered separately.

Station use

Use as centralized AC500 expansion or behind supported S500 communication interfaces; the module is not intended for CI590-CS31-HA stations.

Cooling clearance

Maintain at least 20 mm around the installed station and keep cable ducts clear of natural convection airflow.

Environment

Enclosure protection

IP20 equipment must be installed in a suitable control enclosure with all terminal blocks and covers correctly fitted.

Temperature and storage

The S500-eCo system range is 0 to 60 C horizontal, 0 to 40 C vertical and -40 to 70 C for storage.

Safe handling

Remove all supply and process voltage before wiring, inserting or removing the module, and use SELV or PELV supplies.

FAQ

Q1. How can the quoted DO562 be verified?

Match the complete model DO562 and ABB order number 1SAP230900R0000 on the nameplate, packaging and quotation.

Q2. How can New, Used and Refurbished condition be distinguished?

Request close-up photos of the label, terminal areas, DIN-rail latch and housing. Prior wiring marks, rail wear or replacement labels may indicate use or repair.

Q3. How should a supplier be checked?

Verify company registration, physical address, bank beneficiary and references, and require a written quotation naming DO562 and 1SAP230900R0000.

Q4. Which technical points need engineering approval?

Confirm sixteen 24 V DC transistor outputs, 0.5 A per channel, 8 A group limit, external 3 A fast fuses, terminal-block type and S500 station compatibility.

Q5. What evidence should be obtained before payment?

Ask for dated photos or video showing the ABB label, order number, production markings, housing and both terminal-block areas, plus any included accessories.

Q6. Can DO561 or another similar module replace DO562?

No direct substitution should be assumed. DO561 has eight outputs and a different terminal allocation; wiring, load current and configuration must be reviewed.

Recommend Models

SM560-S	6ES7517-3FP00-0AB0	TC-FXX102
6ES7654-7HY00-0XA0	6ES7511-1TK01-0AB0	VE3051C2
ATA4D	TB851	1756-A10
ACCC01	DI562	TU842
6ES7321-7BH01-0AB0	1769-L36ERM	TB541-ETH
6ES7417-4HL04-0AB0	KJ2002X1-BA1	AFV30D
6ES7211-1AE40-0XB0	DI524	1756-L905TS
PM851K01	CC-PCNT03	6ES7522-1FH00-0AA0
TU844	1756-A4	1756-L71
1756-PA72	6ES7231-5QD32-0XB0	ADV557
SD832	TU843	KJ1501X1-BC1
6EP3331-6SB00-0AY0	6ES7288-1ST40-0AA1	TU515
AFV30S	6ES7331-7NF00-0AB0	6ED1055-1CB10-0BA2
CC-TCNT04	CI873K01	6ES7513-1RL00-0AB0
6ED1055-4MH08-0BA1	AAR181	CC-TCNT01
1756-L74	6ES7654-7HC00-0XA0	CC-PCNT02
TB561-ETH	6ES7232-4HD32-0XB0	CI854AK01
CI521-MODTCP	CI865K01	6ES7288-5AE01-0AA0
5069-L340ERM	TU847	PM858K01
6ES7288-1CR30-0AA0	6ES7288-5CM01-0AA0	1756-IT6I