ALL PRODUCTS

ABB AC500 V3 PM5650-2ETH High-Performance Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3 PM5650-2ETH High-Performance Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3

PM5650-2ETH

AC500 V3 processor module with 80 MB user program memory, dual independent Ethernet, RS232/RS485 and CAN interfaces, plus an integrated display.

KEY FEATURE: 80 MB user program memory with 600 MHz processing and dual independent Ethernet.

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

ABB AC500 V3 PM5650-2ETH

High-performance programmable logic controller CPU module

Product Overview

PM5650-2ETH is an ABB AC500 V3 processor module identified by product ID 1SAP141000R0378. It integrates control, communication and local diagnostics in one compact CPU.

Key Specifications

24 V DC supply; 80 MB user program memory; 256 MB RAM; 512 MB flash; 600 MHz TI ARM Cortex-A9 processor; minimum instruction time of 0.01 us for binary, word and floating-point operations.

Interfaces and Expansion

Two independent Ethernet interfaces, one configurable RS232/RS485 serial interface, one CAN interface, optional memory card support and expansion for up to 10 local I/O modules.

Mechanical Data

Net dimensions are 67.5 x 76 x 62 mm (W x H x D). Product net weight is 0.134 kg. Install on a dedicated TB56xx-2ETH terminal base.

Ordering Identification

Complete model PM5650-2ETH; ABB product ID and order code 1SAP141000R0378; EAN 4013614570919.

Technical Data

Complete model	PM5650-2ETH
Order code	1SAP141000R0378
Product family	ABB AC500 V3
Product type	PLC CPU processor module
Dimensions	67.5 x 76 x 62 mm (W x H x D)
Weight	0.134 kg net
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V DC
Current consumption	0.120 A typical with module alone; up to 0.600 A typical with all couplers and I/Os
Processor	TI ARM Cortex-A9 32-bit RISC, 600 MHz
Memory	256 MB RAM; 512 MB flash; 80 MB user program memory
Maximum downloadable application	84 MB
User program code and data	8 MB dynamically allocated
Minimum instruction time	0.01 us binary; 0.01 us word; 0.01 us floating-point
Ethernet	Two independent interfaces with two RJ45 connectors; separate MAC addresses; switch operation supported
Serial interface	One configurable RS232/RS485 interface via pluggable spring terminal block
CAN interface	CANopen Master, CAN 2A/2B and J1939 via two 5-pole pluggable spring terminal blocks
Local I/O expansion	Up to 10 local extension modules; up to 320 digital I/Os or 160 analog I/Os
Terminal base	Dedicated TB56xx-2ETH terminal base; TB5600, TB5610 or TB5620 according to communication-module slot requirement
Engineering software	Automation Builder 2.1 or later
Approvals	Official ABB catalog lists CE, UKCA, RCM, cULus and multiple marine type approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Controller performance

Executes high-speed IEC 61131-3 applications with 80 MB user program memory, an 84 MB maximum downloadable application and a 1 ms minimum cyclic task.

Motion capability

Supports licensed motion control through CM579-ETHCAT or onboard CAN synchronization; up to eight synchronized axes are listed for a 1 ms task.

Local diagnostics

Integrated display and eight function keys provide local diagnosis and status access.

Interfaces

Dual Ethernet

Two independent Ethernet interfaces use separate MAC addresses or operate as a two-port switch and support standard and licensed industrial protocols.

Serial communication

The configurable RS232/RS485 interface supports ASCII and Modbus RTU Master/Slave communication.

CAN communication

The onboard CAN interface supports CANopen Master, CAN 2A/2B and J1939.

Installation

Terminal base selection

Use only a compatible TB56xx-2ETH terminal base. Select TB5600, TB5610 or TB5620 according to the required communication-module slots.

Local expansion

Up to 10 local I/O modules can be connected within the official digital and analog I/O limits.

Connector planning

Provide two RJ45 Ethernet connections, one pluggable serial terminal block and two 5-pole CAN terminal blocks as required.

Compatibility

Engineering environment

Configure and program the CPU with ABB Automation Builder 2.1 or later.

Safety integration

PM5650-2ETH supports AC500-S safety PLC integration and compatible SM560-S safety modules.

Protocol licensing

Verify licenses for Ethernet/IP, IEC 61850, BACnet, KNX IP and other licensed functions before procurement.

FAQ

Q1. How can the quoted unit be verified as the exact PM5650-2ETH?

Match the complete model PM5650-2ETH and ABB order code 1SAP141000R0378 across the quotation, nameplate and packing label. Verify the 80 MB memory and dual-Ethernet, serial and CAN interface configuration.

Q2. How can New, Used and Refurbished PM5650-2ETH units be distinguished?

Request current photos of the nameplate, housing, display, keys, both RJ45 ports, serial and CAN terminals, terminal contacts and packaging. A New unit should show no mounting, wiring or connector wear, and its condition should be stated in writing.

Q3. How should the supplier be checked before purchasing PM5650-2ETH?

Verify legal registration, physical address, company payment account, written quotation, return terms and traceable references. All documents should consistently show PM5650-2ETH and 1SAP141000R0378.

Q4. Which engineering specifications require confirmation?

Check the 24 V DC supply, 67.5 x 76 x 62 mm dimensions, 0.134 kg weight, 80 MB user program memory, TB56xx-2ETH requirement, Automation Builder version, Ethernet, RS232/RS485 and CAN requirements.

Q5. What evidence should be requested before payment?

Request timestamped photos or video showing PM5650-2ETH, order code 1SAP141000R0378, serial number, display, keys, all interfaces, terminal contacts, housing and sealed packaging.

Q6. Can a lower-memory AC500 V3 CPU, PM5670-2ETH or an -XC version replace PM5650-2ETH?

Not automatically. Memory, processor performance, motion limits, environmental design and terminal-base requirements differ. Approve substitution only after the complete code and every electrical, mechanical, interface and software requirement are checked.

Recommend Models

Randomly selected industrial automation models

IZMX-ST230AD-1	SFA-S2	7940016563
60-692-21	AD3724M	1014K 60-1739-01
ABB 2CDG 120 039 R0011	2CDG110081R0011	MXO2LE VER.003
7MF1564-3CE10-1DA1	DDBC320-DALI	026592 RS485
ABB 1SAZ211201R1035 TA25DU-5.0	SCS LG-003842	MTN647895 REG-K/8x230/16
ABB 2CDG110042R0011	PM55A	1609C39G-01
O5H700	HMC-G03-V12	PM5 802161-01
3/24 1A/21S	L24734-F655-A5	W7754Q1008
ABB RTXP 24 RK 926 315-AV	FX2NC32MTDSS	PT5000C,6.1003.002
CEN-CI3-3 CEN-CI3-3	BMXXBP0800	4I4O ZC H142402
SDB-Tn10-20-1	DDC-400	430209003 T-500SW
MOD-1472	7711UC-HD	EB0564
ABB 6814U-500 6800-0-2518	1100-0441	3-SDC1
048412	MPS 112	PAN-PWR-C13-C14
PD625 / BM009	SE6104	c-c500 500/MTP850
tya604d	1692-ZR2222	OD7685/OD7685.12
Mini8	6ES71934CB300AA0	8-200PSI 0.6-13.8
BN-2-D	130367-01	60-1281-01
ABB TU542 1SAP213200R0001	RJ45 CPAC-4-1C-LV	QFA2060D
LPS43	60-1022-01	51303932-476-RP