Minimum Order Quantity |
1 Piece |
Price |
Contact for Jim |
Packaging Details |
Original new Factory Sealed |
Delivery Time |
3–7 Days |
Payment Terms |
T/T |
Shipping Method |
DHL / FedEx / UPS / TNT |
Supply Ability |
In stock |
Series-level specifications are shown below. Values labeled PM 803F apply only to that CPU configuration; supply and interface options depend on the modules ordered.
|
Model Number
|
AC800F
|
|
Processor architecture
|
32-bit superscalar RISC
|
|
Cyclic task interval
|
Configurable from 5 ms
|
|
Typical I/O capacity
|
Approximately 1,000 I/Os; application dependent
|
|
Fieldbus module capacity
|
Up to 4 modules
|
|
Ethernet module slots
|
2
|
|
PROFIBUS DP rate
|
Up to 12 MBd
|
|
Operating ambient temperature
|
0 to 60 °C
|
|
Module internal temperature
|
0 to 70 °C
|
|
Operating temperature gradient
|
1 °C/min
|
|
Storage and transport temperature
|
-25 to +85 °C
|
|
Relative humidity, annual average
|
≤80%; non-condensing
|
|
Relative humidity, short-term
|
≤95% for up to 30 days/year; non-condensing
|
|
Protection with module complement
|
IP20
|
|
Electrical safety class
|
Class II
|
|
Overvoltage category
|
II
|
|
Pollution degree
|
2
|
|
Operating vibration
|
2 g / 0.15 mm, 5–150 Hz; 3 × 5 cycles
|
|
Transport shock
|
30 g, 11 ms; 3 shocks per axis
|
|
EMC immunity
|
EN 61000-6-2
|
|
EMC emissions
|
EN 61000-6-4
|
|
NAMUR EMC requirement
|
NE21
|
|
Climatic category
|
3K3, EN 60721-3-3
|
|
Humidity category
|
RH-1, EN 61131-2:1994
|
|
PM 803F processor performance
|
Up to 150 MIPS; configuration specific
|
|
PM 803F application RAM
|
16 MB SDRAM, battery backed
|
|
PM 803F flash EPROM
|
8 MB, 32-bit words
|
|
PM 803F internal CPU cache
|
16 K
|
|
PM 803F serial EEPROM
|
16 kbit
|
|
PM 803F binary/word processing
|
0.78 ms per 1,000 instructions
|
|
PM 803F floating-point processing
|
1.09 ms per 1,000 instructions
|
|
PM 803F basic-unit power consumption
|
7.8 W maximum; excludes added modules
|
|
AC supply option
|
115–230 V AC with SA 811F
|
|
DC supply option
|
24 V DC with SD 812F
|
|
Sales
Jim Pei
|
Email
|
Phone/Whatsapp
|
ABB AC800F identifies the Freelance AC 800F modular fieldbus controller series for process automation. The platform accommodates up to four fieldbus modules and supports mixed fieldbus technologies in one station. A typical controller application serves approximately 1,000 I/Os, depending on the project. The PM 803F configuration provides battery-backed application memory for process and configuration data. Ethernet modules connect the station to the Freelance control network. The required CPU, power supply and communication modules must be specified for each order.
The AC800F integrates field-device communication with process-control application execution. Freelance Engineering provides a common environment for controller and fieldbus configuration. Compatible device descriptions support the integration of intelligent field equipment. Controller redundancy can maintain synchronized primary and secondary stations when appropriately configured. Battery backup protects controller data when the required backup hardware is installed. This series listing supports sourcing of a matched assembly rather than implying that every optional interface is included.
Collect process signals through the selected fieldbus modules, execute the configured control application, and return commands to field actuators.
Combine supported PROFIBUS, FOUNDATION Fieldbus, serial Modbus or Freelance rack-I/O connections using the appropriate modules and linking devices.
Use two identically equipped controllers and a dedicated Ethernet redundancy connection for synchronized primary and secondary operation.
No. AC800F is a controller-series designation. Please specify the CPU, power supply, Ethernet and fieldbus modules required for your assembly.
Yes, a suitably equipped controller can use both buses simultaneously. The appropriate fieldbus modules and linking devices are required.
The two controllers must be identically equipped and interconnected through the dedicated redundancy communication path.
Send the CPU and Ethernet module references. Backup arrangements depend on the fitted hardware and must be matched before ordering.
We provide condition information and product checks before delivery, with 12-month warranty support subject to the agreed terms.
Available, confirmed stock is dispatched promptly after payment is received. We confirm the exact assembly and shipping schedule before the order.
With 20+ years of industry experience, we serve customers worldwide and have built long-term relationships across the UK, Russia, UAE, India, Venezuela, and more.
Our experienced team provides reliable pre-sales and after-sales support, helping customers select suitable products and resolve purchasing concerns.
We supply leading automation brands covering PLCs, DCS, I/O modules, drives, motors, power supplies, communication modules, and more.
A wide range of products is available from stock, including discontinued, obsolete, and hard-to-find parts, helping reduce sourcing time.
We value long-term cooperation and treat every customer with honesty, respect, responsibility, and care.
From a single replacement part to complete automation projects, we are ready to support your needs and build a long-term partnership.
Our team members have an average of more than 10 years of industry experience. We have worked with customers worldwide, including those from India, Germany, Sweden, Italy, Russia, Venezuela, Israel, and many other countries. Throughout our careers, we have collectively completed over 3,000 orders and established long-term business relationships with customers across nearly 30 countries.
We can often identify a product’s manufacturer, series, configuration, and function from its model number or nameplate photo. We also understand how revisions, firmware, and specifications affect compatibility and whether an alternative model can be used safely.
In Practice: An Indian customer urgently needed a discontinued control module after several suppliers reported no stock. We identified its exact revision and function from the nameplate, checked compatible alternatives, and contacted factory and warehouse channels to locate matching inventory. After installation, the customer confirmed that the module operated correctly and later asked us to source additional spare parts.
Our team treats every inquiry sincerely and answers every question patiently. Even for complex requests, we verify and respond to each detail instead of providing a rushed or uncertain answer.
In Practice: A German customer sent a mixed list of automation products and asked repeated questions about revisions, condition, photos, and delivery. Our team organized the requirements, checked every item, and replied point by point. The customer said our detailed communication made the purchasing decision easier and continued sending us new inquiries.
|
ADAM-5000/TCP
|
SAVI 440 W440-M
|
ADCDW3895TU
|
|
WMS-617-321
|
POS-M1106
|
1381V PL-1381-11-V
|
|
XD508
|
WLP450C
|
GTD-2000Tx
|
|
21188-1 0P6237
|
8803006430 RHT-WM-485-LCD
|
XJBO3-5921-1
|
|
4UI/4AO ITEM3-2000U040400
|
QL-NE100
|
QL-405
|
|
AKM115F120
|
DDNI485
|
EDS-405A-SS-SC
|
|
DGBP-E2CRS
|
VZ0008.BD4 VAV-SDZ-K2-L
|
077672L
|
|
5500paca
|
74190A1
|
RS8-L-DIN
|
|
PS24
|
A004-9 FQ00.640
|
GS06
|
|
DDFCUC024
|
55-FU
|
M2150-4DBC
|
|
CS-T02
|
MAUX2
|
JRBS-57-8
|
|
RT500
|
DPG500
|
H2S 02000-A-1758
|
|
PC03000AM0
|
THS301-T401H001-DMP
|
TSP70
|
EN
