ALL PRODUCTS

Allen-Bradley CompactLogix 5380 5069-L340ERM 4 MB 20-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 5069-L340ERM 4 MB 20-Axis EtherNet/IP Motion Controller

Allen-Bradley CompactLogix 5380 4 MB 20-Axis EtherNet/IP Motion Controller

Complete Model

5069-L340ERM

Official Product Description

CompactLogix 5380 motion controller with 4 MB user memory, 20 Integrated Motion axes, 31 local Compact 5000 I/O modules, 90 EtherNet/IP nodes and dual 1 Gb Ethernet ports.

CORE FEATURE: Integrated EtherNet/IP motion control for up to 20 drive axes with 4 MB memory and 90-node capacity.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

allen bradley compactlogix 5380 5069 l340erm 4mb 20 axis motion controller-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

5069-L340ERM is an Allen-Bradley CompactLogix 5380 controller with 4 MB of user memory and Integrated Motion over EtherNet/IP support for up to 20 position-loop drive axes.

Rockwell Automation specifies up to 90 EtherNet/IP nodes and 31 local Compact 5000 I/O modules with a compatible Studio 5000 Logix Designer version.

Two embedded Ethernet ports support 10 Mbps, 100 Mbps and 1 Gbps full-duplex operation in Linear / DLR or Dual-IP mode, while the USB 2.0 Type B service port supports engineering tasks.

Technical Data

Complete model	5069-L340ERM
Brand	Allen-Bradley / Rockwell Automation
Product family	CompactLogix 5380
Product type	CompactLogix 5380 EtherNet/IP motion controller
User memory	4 MB
Integrated motion	Up to 20 Integrated Motion on EtherNet/IP position-loop drive axes
EtherNet/IP nodes	90 maximum with Studio 5000 Logix Designer version 31 or later
Local I/O modules	31 maximum Compact 5000 I/O modules
Ethernet interfaces	2 embedded Ethernet ports; 10 Mbps, 100 Mbps and 1 Gbps, full-duplex only
EtherNet/IP modes	Linear / Device Level Ring or Dual-IP mode
Network topologies	Device Level Ring, star and linear
USB interface	USB 2.0 Type B, full speed at 12 Mbps, for programming, configuration, firmware update and online edits
Optional nonvolatile memory	1784-SD2 2 GB card ships with the controller; 1784-SD1, 1784-SDHC8 and 1784-SDHC32 are also listed options
MOD Power voltage	18 to 32 V DC
MOD Power current	450 mA maximum
MOD Power inrush	850 mA for 125 ms
Power dissipation	8.5 W maximum
Thermal dissipation	29 BTU/hr maximum
Dimensions	143.97 x 98.10 x 136.81 mm, height x width x depth
Weight	Approximately 0.768 kg
Mounting	Horizontal mounting on EN 50022, 35 x 7.5 mm DIN rail
Enclosure	Open-style equipment
Operating temperature	0 to +60 degrees C
Nonoperating temperature	-40 to +85 degrees C
Relative humidity	5 to 95 percent, noncondensing
Vibration	5 g at 10 to 500 Hz
Shock	30 g operating; 50 g nonoperating
Certifications	c-UL-us, UKCA and CE as listed by Rockwell Automation for this controller family
Official source	Rockwell Automation publication 5069-TD002O-EN-P, pages 3 to 6

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Twenty-axis motion

The ERM catalog suffix provides Integrated Motion over EtherNet/IP for up to 20 position-loop drive axes.

Four-megabyte memory

The controller provides 4 MB of user memory for control, motion and communications programs.

Expanded local I/O

Up to 31 local Compact 5000 I/O modules can be installed in the documented configuration.

High network capacity

The controller supports up to 90 EtherNet/IP nodes with the applicable Logix Designer version.

Connections

EtherNet/IP port 1	Embedded 1 Gb-capable port for controller, distributed I/O and integrated motion communication.
EtherNet/IP port 2	Second embedded port for Linear / DLR operation or a separately addressed Dual-IP network.
USB service port	USB 2.0 Type B full-speed connection for programming, configuration, firmware update and online edits.
MOD Power	18 to 32 V DC through a separately ordered 4-point Compact 5000 removable terminal block.
SA Power	Field-side power is distributed through a separately ordered 6-point removable terminal block according to the installed I/O system.

Installation

01 - Verify the catalog number

Match 5069-L340ERM on the quotation, controller label, packaging and Rockwell Automation product record.

02 - Confirm motion scope

Verify that the project requires the ERM variant and no more than 20 Integrated Motion position-loop drive axes.

03 - Mount horizontally

Install the controller as the leftmost system component on a compatible EN 50022, 35 x 7.5 mm DIN rail.

04 - Plan the I/O system

Keep the local Compact 5000 I/O count within 31 modules and calculate MOD Power and SA Power loads.

05 - Commission communications

Select Linear / DLR or Dual-IP mode, assign the required IP address or addresses and validate firmware, I/O and motion operation with a compatible Studio 5000 Logix Designer version.

Environment

Operating temperature

0 to +60 degrees C.

Nonoperating temperature

-40 to +85 degrees C.

Humidity

5 to 95 percent relative humidity, noncondensing.

Vibration

5 g at 10 to 500 Hz according to IEC 60068-2-6.

Shock

30 g operating and 50 g nonoperating according to IEC 60068-2-27.

Installation environment

Open-style equipment; install in a suitable industrial enclosure for the application.

FAQ

Q1. How can the exact quoted 5069-L340ERM be verified?

Match the complete 5069-L340ERM catalog number on the quotation, Rockwell Automation label and packaging. Confirm CompactLogix 5380, 4 MB memory, 20 Integrated Motion axes, 31 local I/O modules and 90 EtherNet/IP nodes.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the full label, both Ethernet ports, USB port, power RTB sockets, backplane connector, DIN-rail latch, housing and seals. Check for connector wear, dust, scratches, repaired plastic and altered labels.

Q3. How should supplier legality and reliability be checked?

Verify the supplier legal entity, registered address, payment beneficiary and traceable sales contact. The written offer must identify Allen-Bradley, 5069-L340ERM, CompactLogix 5380 motion controller, condition and quantity.

Q4. Which specifications must engineering confirm before purchase?

Confirm 4 MB memory, 20 motion axes, 90 EtherNet/IP nodes, 31 local I/O modules, dual 1 Gb Ethernet mode, 18 to 32 V DC MOD Power, Studio 5000 version, 143.97 x 98.10 x 136.81 mm space and 0.768 kg weight.

Q5. What physical evidence should be requested before payment?

Ask for one date-marked photo set showing the complete 5069-L340ERM label, serial and series markings, both Ethernet ports, USB port, RTB sockets, backplane connector, DIN-rail latch, seals and packaging.

Q6. Can 5069-L340ER replace 5069-L340ERM?

Not when integrated motion is required. 5069-L340ERM supports up to 20 Integrated Motion drive axes, while 5069-L340ER is the standard non-motion controller. Match the ERM suffix, firmware and motion configuration before substitution.

Recommend Models

500L-DOD930	ABB PP846 3BSE042238R1	758-873
SEL-487E 0487E3X648XXC2X4H74424X	90N10	465215
FBM242 P0916MU-0A P0916MT	CTFPL2020K-16N	IF0303
E710 12-0418	12808146 VOE12808143	WD1000FYPS-01ZKB1
6809 H.1010.6504	RJ45S 441-2.1M U-76829	OEM24N5.4-9
20-TT-TEX/TEX	BFD71S 765A827G01	NF50-SRU3015
D26MR402	VMPA2-FB-AP-2-1-S0	ASD21L10N
T22JCC-1	DC5-24V	SY5220-5DZ-01F-Q
IV8435P	OG3-FR 9414-OE	KSC64-11B
8WH9020-6CD10	0701-0102-0008	B100BTZ13R
A6488TML-1/32	RSM-2RKM	OPVXG-EXPT
ABB QHFD122	3/8'' 3401 MA3	SA203BAUL
EVC185 ASTAH040MSS0015H04	RAM-PRO-XL-A	ZM071H
2F893	10654	AB42-03-7-02HH-DC24V
Q-3702A-J4	CP95SDB50-50	UF-SM-10G-PRO
FT-320-05	06137 175MA	75D73070A
140XTS00200	G7S-4A2B-E	2004-437
800F-X20D	32XL	VUVG-LK14-M52-AT-G18-1H2L-S
CPE14-M1BH-5L-1/8 MSZE-B-3-24DC	GE 259B2460AVP020	DAP218/AS-BDAP-218
GE CR120A03302AA	S9111AR0111	2E452