ALL PRODUCTS

Bently Nevada 24701 24701-28-05-XX-025-04-XX MOD:323933-30-02 Stainless Steel Proximity Probe Housing Assembly | Original New

Bently Nevada 24701 24701-28-05-XX-025-04-XX MOD:323933-30-02 Stainless Steel Proximity Probe Housing Assembly | Original New

BENTLY NEVADA · 24701

24701-28-05-XX-025-04-XX MOD:323933-30-02

Stainless Steel Proximity Probe Housing Assembly

Probe 3300 XL 8 mm, multiple approvals	Cable / Penetration 0.5 m / 2.5 in
LEAD TIME In stock	WARRANTY 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 24701 24701 28 05 xx 025 04 xx mod 323933 30 02 stainless steel proximity probe housing assembly original new-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Selection
FAQ
Recommend Models
Recommended Products

STAINLESS STEEL SENSOR HOUSING

Compact external probe mounting for rotating machinery

This configured 24701 assembly combines a stainless steel external housing, adjustable sleeve and reverse-mount 3300 XL 8 mm probe. The order code specifies a 0.5 m probe lead, 2.5 in probe penetration, fitting option 04 and factory modification 323933-30-02.

ROBUST BODY

303 stainless steel housing with 304 stainless steel sleeve.

COMPACT PENETRATION

The 2.5 in penetration option supports shorter machine-case access paths.

CONTROLLED ASSEMBLY

The special XX tokens and MOD identifier must remain matched to the installation drawing.

Technical Data

OFFICIAL DATA

Model-specific technical data

24701-28-05-XX-025-04-XX MOD:323933-30-02

Complete model Complete model	24701-28-05-XX-025-04-XX MOD:323933-30-02
Product family Product family	Bently Nevada 24701
Product type Product type	Stainless steel proximity probe housing assembly
Dimensions Dimensions	78.2 mm body width; 151.9 mm housing height; 27.9 mm lower section; sleeve dimension follows C + D options
Weight Weight	1.8 kg (4.1 lb) typical, without fittings
Probe option 28 Probe option 28	3300 XL 8 mm probe, multiple approvals
Probe cable option 05 Probe cable option 05	0.5 m (20 in)
Probe penetration 025 Probe penetration 025	2.5 in (63.5 mm), ordered in 0.1 in increments
Fittings option 04 Fittings option 04	One 3/4-14 NPT plug only
Materials Materials	303 stainless steel body; 304 stainless steel sleeve
Temperature range Temperature range	3300 XL 8 mm probe operating and storage: -51 to +177 degrees C
Housing compliance Housing compliance	CSA Type 4 enclosure; API 670 compliant external housing

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

APPLICATION CONTEXT

Functions and field value

Verified family capabilities and model-specific configuration

Turbine and compressor bearings Provides a serviceable external mounting point for proximity measurements at fluid-film bearing machines.	Pumps and motors Protects the probe connection and supports repeatable adjustment where the machine case remains accessible.
Short access geometry The 2.5 in penetration option suits installations where the sensing surface is relatively close to the external housing.	Industrial environments Stainless construction, seals and conduit provisions protect the probe assembly while retaining field access.

Construction

ASSEMBLY ARCHITECTURE

Construction and interfaces

Official materials and connection details

Housing body Housing body	303 stainless steel body with threaded dome cover and conduit ports.
Probe sleeve Probe sleeve	304 stainless steel sleeve ordered for the required installation stack-up.
Sensing element Sensing element	Reverse-mount 3300 XL 8 mm probe with 0.5 m integral lead.
Fitting package Fitting package	Option 04 supplies one 3/4-14 NPT plug; remaining XX requirements follow the MOD drawing.

Installation

FIELD WORKFLOW

Installation sequence and checks

01	Verify the complete order code Match the probe option, 0.5 m lead, special C and F tokens, 2.5 in penetration, fitting 04 and MOD 323933-30-02.
02	Confirm machine geometry Compare the machine-case port, standoff requirement and sleeve path with the controlled installation drawing.
03	Set sleeve and probe position Maintain correct probe tip reach and ensure the probe lead remains longer than the complete sleeve path.
04	Seal and verify the signal Install the specified plug, route the cable safely, set the probe gap and confirm the 3300 XL system response.

Selection

ORDER-CODE REVIEW

Configuration checkpoints

24701-28-05-XX-025-04-XX MOD:323933-30-02

24701 24701	Stainless steel external proximity probe housing family.
28 28	3300 XL 8 mm probe with multiple approvals.
05 05	0.5 m (20 in) probe cable.
XX XX	Special standoff configuration controlled by the modification documentation.
025 025	2.5 in (63.5 mm) probe penetration.
04 04	One 3/4-14 NPT plug.
MOD:323933-30-02 MOD:323933-30-02	Factory modification identifier retained in the complete designation.

FAQ

BUYER AND ENGINEER CHECKLIST

Six practical questions before purchase

24701-28-05-XX-025-04-XX MOD:323933-30-02

1. How is this exact housing identified?

Check that 24701-28-05-XX-025-04-XX MOD:323933-30-02 appears in full. Verify penetration 025 and fitting 04 rather than accepting a generic 24701 label.

2. How can buyers identify previous installation?

Request close photos of the sleeve, probe tip, cable entry, threads and cover. Tool marks, seal compression, contamination or cable wear may indicate prior service.

3. How should a supplier be screened?

Match the company identity, quotation, invoice and beneficiary; require current photos of the complete configured assembly and a written discrepancy process.

4. What must engineers measure before ordering?

Confirm the 2.5 in penetration, machine-case port, special standoff geometry, sleeve route, 0.5 m lead and the single 3/4-14 NPT plug arrangement.

5. What proof should be collected before payment?

Obtain dated whole-assembly photos, readable model and MOD identification, probe-tip and connector views, fitting contents and agreed packing or inspection evidence.

6. Can the 025 or 04 options be changed?

Only after engineering review. Penetration changes probe reach, while the fitting option changes the conduit interface and supplied hardware.

Recommend Models

RECOMMENDED

Recommend Model

Random cross-brand industrial automation models

Recommend Model

PR5110/00	QAM9120.040	3HE05894AAAA01
FT2A-CBLR-1T-HD	WRT-822B	AP7920
NH100	58-0000033-01	HB276HD4
M71C-785-412	05400-7004-0001	3SK2122-2AA10
CS8550i-01	565-226	LC1D09N7
SXWUI8A4X10001	RK1400	MAXinBOX16
920R	6400-1106-03	LU4516BHONA
S711DR-EST1	15993030	PSX220
BMXDAI1615H	PXC22-D	BKM-FW10
S3000	4744R	SWP-99-2128-1-4-00
1-EXT-PW	ES4/240/FC	CSM-200-1218
PM850UMG	TM3TI4DG	492-8363-03
2711-T5A16L1	QL-NE100	AMF9
DDNG485	DS-1003KI	300365
03-7060-STADGS1-R1BK	QBE9103-P60U	45186-6
AKEC-212R	XBTAUL024ZY3T3B3RNNR	SSB401-13-S1
AX-DIM4-MI5	HG-00007	22-HIM-A3
PS120/240-AC85U	380-0567-0A	ANN840
PXC64-U	3900-02-10	IPC241ER5-DL
262-DDVU-SFSF-TE-15	UD1100001-01	0-073-0201-1