ALL PRODUCTS

Bently Nevada 31000 Series 31000-28-05-00-020-03-00 Proximity Probe Housing Assembly

Bently Nevada 31000 Series 31000-28-05-00-020-03-00 Proximity Probe Housing Assembly

BENTLY NEVADA | 31000 SERIES

31000-28-05-00-020-03-00

PPS Proximity Probe Housing Assembly with 3300 XL 8 mm multiple-approval probe

CONFIGURATION: 0.5 m probe cable | No standoff adapter | 2.0 in probe penetration | Fitting option 03 | No outer sleeve

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 31000 series 31000 28 05 00 020 03 00 proximity probe housing assembly-1

Overview
Technical Data
Inquiry
Construction
Installation
Selection Guide
Environment
FAQ
Recommend Models
Recommended Products

Bently Nevada 31000 Proximity Probe Housing Assembly

Exact configured model: 31000-28-05-00-020-03-00

Official product identity

The 31000 assembly provides external access to a proximity probe mounted through the machine case. This exact configuration uses the corrosion-resistant PPS housing with a 3300 XL 8 mm probe carrying the multiple-approval option and a 0.5 m cable.

Configured geometry

No standoff adapter is supplied. Probe penetration is 2.0 in (50.8 mm). Option F:00 removes the outer sleeve, retainer and retaining nut from the ordered assembly.

Connection package

Option E:03 supplies two plugs, one 3/4-14 NPT fitting, one 3/4-14 to 1/2-14 NPT stainless steel reducer and one cable seal grip with three grommet ranges.

Installation focus

Plan the machine-case mounting separately because option F:00 contains no outer sleeve or retaining hardware. Confirm probe gap, cable reach, conduit entry and support before installation.

Procurement check

Match every segment of 31000-28-05-00-020-03-00. The probe approval option, 0.5 m cable, no standoff, 2.0 in penetration, fitting package and absence of outer-sleeve hardware jointly define this assembly.

Technical Data

Official configuration and specifications

Complete model	31000-28-05-00-020-03-00
Product family	Bently Nevada 31000 Series
Product type	English proximity probe housing assembly
Probe	3300 XL 8 mm probe, multiple approvals (option 28)
Probe cable length	0.5 m (20 in)
Standoff adapter	None (option 00)
Probe penetration	2.0 in (50.8 mm), option 020
Fittings	Two plugs; one 3/4-14 NPT fitting; one 3/4-14 to 1/2-14 NPT SST reducer; cable seal grip with grommets
Mounting configuration	No outer sleeve, retainer or retaining nut (option 00)
Housing material	Glass-reinforced conductive PPS thermoplastic
Sleeve material	AISI 304 stainless steel
Dimensions	Configured C + D dimension: 2.0 in (50.8 mm)
Weight	1.2 kg (2.6 lb) typical
Protection rating	CSA Type 4X; IP66 verified
Probe temperature	-51 to +177 °C (-60 to +351 °F), operating and storage
Standard	API 670 compliant housing assembly
Official document	Datasheet 141610 Rev. R, pages 1–6, 9, 15–16

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Construction

Housing body

The housing body is glass-reinforced polyphenylene sulfide thermoplastic containing conductive fibers. PPS provides corrosion resistance while the enclosure protects the probe and cable connection.

Metal components

The probe sleeve and retaining chain are AISI 304 stainless steel. Exterior screws and the standard outer-sleeve design use AISI 303 stainless steel, although this exact F:00 configuration omits the outer sleeve and retaining hardware.

Probe assembly

Option A:28 installs a 3300 XL 8 mm probe with multiple approvals. Option B:05 specifies the 0.5 m probe cable.

Cable entry hardware

Option E:03 supplies the plugs, NPT fitting, stainless steel reducer and cable seal grip needed for the selected connection arrangement.

Installation

Machine-case preparation

Prepare a suitable machine-case opening and mounting arrangement for the probe. Because option F:00 has no outer sleeve, retainer or retaining nut, do not assume the standard sleeve-mount hardware is included.

Probe setting

Insert and position the probe assembly so the configured 2.0 in penetration and required electrical gap are maintained. Avoid side-view or rear-view metal effects around short penetration installations.

Cable routing

Route the 0.5 m probe cable without exceeding its bend or strain limits. Use the selected fitting package to close unused ports and seal the cable entry.

Environmental protection

Install the cover and plugs correctly to preserve the housing protection concept. The housing is mechanical and environmental protection only and is not an explosion-proof enclosure.

Selection Guide

31000

English PPS proximity probe housing assembly.

28 | Probe

3300 XL 8 mm probe with multiple approvals.

05 | Cable

0.5 m (20 in) probe cable.

00 | Standoff

No standoff adapter.

020 | Penetration

2.0 in (50.8 mm) probe penetration.

03 | Fittings

Two plugs, one 3/4-14 NPT fitting, SST reducer and cable seal grip.

00 | Mounting hardware

No outer sleeve, retainer or retaining nut.

Environment

Protection

The official datasheet lists CSA Type 4X and verified IP66 protection for the 31000/32000 housing design.

Temperature

The installed 3300 XL 8 mm probe is specified for -51 to +177 °C (-60 to +351 °F) operating and storage temperature.

Mechanical properties

Typical assembly weight is 1.2 kg. The PPS housing uses Neoprene O-rings and the recommended retaining-nut torque for configurations with that hardware is 29.4 N·m.

Application limitation

The housing is not explosion proof. Hazardous-area use requires an approved transducer system and appropriate intrinsic-safety barriers; confirm the exact approval combination for the end-user country.

FAQ

Q1. How do I verify that a quotation is for the exact complete model?

Require 31000-28-05-00-020-03-00 on the label, packing evidence and quotation. Confirm option 28 probe, 05 cable, 00 standoff, 020 penetration, 03 fittings and 00 mounting hardware.

Q2. How can I distinguish New, Used and Refurbished condition?

Request current photos of the PPS housing, cover, probe tip, 0.5 m lead, connector, plugs, fitting, reducer and cable seal grip. Look for machine-case residue, thread wear, cable marks, replaced labels or damaged captive screws.

Q3. How can I check whether the supplier is legitimate and reliable?

Verify company registration, address, bank beneficiary and traceable contact details. Cross-check the exact ordering code against Bently Nevada datasheet 141610 Rev. R before payment.

Q4. Which specifications must an engineer confirm before purchase?

Confirm the 3300 XL 8 mm multiple-approval probe, 0.5 m cable, 2.0 in penetration, no standoff, fitting option 03 and the absence of an outer sleeve and retaining hardware.

Q5. What physical evidence should be requested before payment?

Ask for dated photos or video showing the complete model label, probe and connector, cable length, PPS housing, supplied fitting set and evidence that no F:02 outer-sleeve hardware is being substituted.

Q6. Can a similar 31000 suffix replace this model?

Not automatically. Changing 28, 05, 00, 020, 03 or 00 changes approvals, cable, geometry, fittings or mounting hardware. Any substitution requires an engineering review.

Recommend Models

60 randomly selected industrial automation models

X20CP0483	MVME147-012	SPASI23
KDA3.3-100-3-A00-W1	A 5X00419G02 Ethernet Link Controller	T8151C
ProSoft PLX31-PND-MBS4	T8461C	DS200DMCBG1A
80190-100-01-R	DS200TCTSG1A	X-CPU 01
X-PS 01	1783-BMS10CGP	2711P-T15C21D8S
X-COM 01 001	PM554-TP-ETH	1769-L23E-QBFC1B
3HAC029896-001	5466-1045	DS3800NDAC1B1C
HCS01.1E-W0008-A-03-B-ET-EC-NN-L4-NN-FW	16 ACS580-01-206A-4	MVME167-032A
MVME61006E-0161	MVME5500	Siemens 6ES7522-1BH10-0AA0
EPRO MMS6310	PM591-2ETH	2707-M485P3
22B-B012N104	2707-V40P2N	KJ3241X1-EA1
EJA110E-JMS4G-717EB/NF	160-BA04NSF1	3HAC058993-004
ProSoft MVI69E-MBS	Yokogawa AAI543-S50/K4A00	T8451C
IC660BBD025	CC-PDIH01	22B-D4P0N104
RLC16 200-570-000-014	6 ACS355-03E-15A6-4	TRICONEX 8312
B 5X00453G01 Remote I/O Node Controller	FCM2F4	IC655MDL527
Yokogawa ATD5A	2715P-T10CD	Yokogawa S2MMM843-SS1130
ProSoft RLX2-IHNF-A	Yokogawa AAI143-H50/K4A00	2711P-T12C4D8
IOCN 200-566-101-012	Emerson A6120	X20SI4100
TDM4.1-020-300-W0	IEMMU21	5466-315