Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
bently nevada 3300 5 mm 330171 xx xx 10 02 05 mod 142824 100 proximity probe-0

BENTLY NEVADA

Home >  Products >  BENTLY NEVADA

Bently Nevada 3300 5 mm 330171-XX-XX-10-02-05 MOD:142824-100 Proximity Probe

330171-XX-XX-10-02-05 MOD:142824-100
Bently Nevada 3300 5 mm Proximity Probe
1.0 m cableClickLocMultiple approvals
Selection note: Confirm the complete part number, installed interface and approval requirements before quotation.
  • Overview
  • Features
  • Functions
  • Specifications
  • Installation & Wiring
  • Theory of Operation
  • Technical Data Summary
  • FAQ
  • Models
  • Recommended Products
Description

The Bently Nevada 330171 is a 3300 5 mm proximity probe with 1/4-28 UNF thread and without armor. In 330171-XX-XX-10-02-05, the XX fields leave the unthreaded and overall case lengths unspecified. Option 10 specifies 1.0 m total length, option 02 specifies a miniature coaxial ClickLoc connector with standard cable, and option 05 specifies multiple approvals. MOD 142824-100 is subject to verification.

Applications
  • Static position measurement on conductive machine surfaces.
  • Dynamic vibration measurement on fluid-film bearing machines.
  • Keyphasor and speed-measurement applications when the official application guidance is followed.
  • Constrained installations where the smaller 5 mm probe package is needed.

Features

Features
Probe type
3300 5 mm probe, 1/4-28 UNF thread, without armor.
Total length
1.0 m.
Connector
Miniature coaxial ClickLoc, standard cable, without connector protector.
Approvals
Ordering option 05: multiple approvals; exact certification scope must be verified.
Probe tip
TipLoc-molded PPS construction.
Interchangeability
Designed for use with compatible 3300 XL extension cable and Proximitor Sensor.

Functions

Functions

When combined with a compatible 3300 XL extension cable and Proximitor Sensor, the probe produces an output proportional to the distance between its tip and a conductive target. The system supports static position and dynamic vibration measurements. Complete component compatibility is necessary for the documented system performance.

Specifications

Specifications
Linear range
2 mm (80 mils).
Recommended gap
1.27 mm (50 mils).
Scale factor
7.87 V/mm (200 mV/mil), +/-6.5% typical.
Frequency response
0 to 10 kHz, +0/-3 dB.
Minimum flat target
15.2 mm diameter.
Minimum shaft diameter
50.8 mm; 76.2 mm recommended.
Probe DC resistance at 1 m
7.59 +/-0.50 ohm.
Probe-case torque
5.1 N m recommended; 7.3 N m maximum.
Minimum cable bend radius
25.4 mm.

Installation & Wiring

Installation & Wiring
  1. Confirm the two XX dimensions from the nameplate or official order record.
  2. Confirm MOD 142824-100 before quotation.
  3. Install the 1/4-28 UNF unarmored probe with the specified case torque.
  4. Maintain the 25.4 mm minimum cable bend radius.
  5. Use the ClickLoc connector finger tight; the locking mechanism should click.
  6. Set the nominal gap to 1.27 mm against a suitable conductive target.
  7. Verify the exact approval documentation required by the site.

Theory of Operation

Theory of Operation

The noncontacting eddy-current probe senses distance to a conductive surface. With the compatible extension cable and Proximitor Sensor, changes in gap become a proportional voltage. Static gap represents position, while changing gap represents vibration. Target geometry and material affect the calibrated response.

Technical Data Summary

Technical Data Summary
Probe-tip material
Polyphenylene sulfide.
Probe-case material
AISI 303 or 304 stainless steel.
Cable
75-ohm FEP-insulated triaxial cable.
Temperature stability
Scale factor remains within the stated range from -35 to +177 degrees C under official conditions.
Approval option
05 means multiple approvals; scope is subject to verification.
Unknown dimensions
XX unthreaded and case lengths must be confirmed.
Stock and condition
Confirm before quotation; condition is subject to verification.
Testing and warranty
Available on request and subject to verification.

FAQ

FAQ

Is physical stock confirmed? Confirm before quotation.

Is the item new, used or refurbished? Subject to verification.

Can current item and nameplate photographs be supplied? Available on request.

What warranty applies? Available on request and stated in the quotation.

What is the dispatch time? Confirm before quotation.

Has the item been tested? Test status and scope are subject to verification.

Which payment methods are accepted? Available on request and stated in the proforma invoice.

How quickly is a quotation issued? Response timing depends on configuration and availability verification.

How is the transaction documented? Request an itemized quotation, company details, invoice, current photographs and available shipment records.

Models

Models
OJ5131
KIT-CB4-1-PC
ABB 1SAP240000R0001
700503164
9700931-0014C 5X00105G14LVL1
5-240Aac
MTN6500-0113
MC1471A.3Z
BA101011-001-AI/O
ABB SV/S 30.640.5
PXC50-ED S55372-C110
QAM2171.040
310 04.56.00.50.00
GJR2254000R1 DC373B-E 8017/018
HE693RTD600R
2CDG110233R0011
IOP304
AC-500
LG1119D
ir425/ir425-D4-2
102044-00-48-15-02
Z757 71889
DM 3258
08CH 10A HDL-MR0810.432
ABB A30-30-10 1SBL281001R8810
P9XPNVG 185002
DS10 LV CEAS410751-01-01 / HK50AA003
DIN-TSTAT-FCU
FVS318AU
SPR-3038WS-VDA SWK-3000WS
IM5090 IME3015BBPKG
LC-203
MPTZ-10 1624-66057-001
HLG-320H-48
ABB 6127/02-84-500
WG0508-A06
1756-IF8
R1C37900102
KL-120
ABB DG/S 1.64.1.1 2CDG 110 198 R0011
JOR-94355 087626-000
M600-WM9
M71C-2000-595-TN
RCP-64PB-OLED
082-0310x5
0-52862
ABB 1.1400.0.10 1SKD 340000 R1400
RMC-132D 100156839.40
BDS-EP
XB13

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000