ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330180-90-05 9 m Panel-Mount Proximitor Sensor | Original New

Bently Nevada 3300 XL 8 mm 330180-90-05 9 m Panel-Mount Proximitor Sensor | Original New

BENTLY NEVADA - 3300 XL 8 MM

330180-90-05

9 m Panel-Mount Proximitor Sensor

SYSTEM LENGTH

9.0 m

MOUNTING

Panel mount

APPROVAL OPTION

CSA / ATEX / IECEx

Email Inquiry [email protected]

WhatsApp +86 18159889985

LEAD TIME

In stock

WARRANTY

1 year

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Construction
Performance
Compatibility
FAQ
Recommend Models
Recommended Products

BENTLY NEVADA - 3300 XL 8 MM

330180-90-05

9 m Panel-Mount Proximitor Sensor

Product Overview

This Proximitor Sensor conditions the signal from one compatible 3300-series 5 mm or 3300 XL 8 mm probe and extension cable. Ordering option 90 specifies a 9.0 m total transducer system length with the panel-mount base; option 05 specifies CSA, ATEX and IECEx approvals.

SYSTEM LENGTH

9.0 m

MOUNTING

Panel mount

APPROVAL OPTION

CSA / ATEX / IECEx

Configuration Control

Use the complete ordering number for quotation and installation review. Verify every length, mounting, cable, connector and approval option against the official documentation before substitution.

Technical Data

SPECIFICATION	OFFICIAL VALUE
Complete model	330180-90-05
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Proximitor Sensor
System length	9.0 m (29.5 ft)
Mounting	Panel mount, 4-hole base
Dimensions	81.3 x 61.0 x 63.5 mm maximum panel-mount envelope
Weight	246 g (8.67 oz)
Sensor input	One non-contacting 3300-series 5 mm or 3300 XL 8 mm probe and extension cable
Supply voltage	-17.5 to -26 Vdc; -23 to -26 Vdc with barriers
Current consumption	12 mA maximum
Output resistance	50 ohm
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm
Incremental scale factor	7.87 V/mm (200 mV/mil), +/-6.5% including interchangeability error
Deviation from best-fit straight line	Less than +/-0.038 mm (+/-1.5 mil)
Frequency response	0 to 10 kHz, +0/-3 dB
Housing material	A308 aluminum
Operating temperature	-52 to +100 deg C
Storage temperature	-52 to +105 deg C
Approvals option	CSA, ATEX and IECEx

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

The configuration of 330180-90-05 is intended for the following documented system roles and installation conditions.

RADIAL VIBRATION Conditions static and dynamic displacement signals from a matched 3300 XL probe system.	SHAFT POSITION Supports position and gap measurements within the documented 2 mm linear range.
MACHINE PROTECTION Interfaces the transducer system with compatible Bently Nevada monitoring channels.	PANEL INSTALLATION Panel-mount packaging for a matched 9 m system.

Construction

CONFIGURATION ELEMENTS

1A308 aluminum Proximitor Sensor housing with isolated panel-mount base.

2Four-hole panel footprint compatible with previous 3300 Proximitor Sensor mounting when the specified base is used.

3Probe and extension-cable input connector plus field-wiring terminals for power, common and output.

4Panel envelope shown in the official drawing: 81.3 x 61.0 x 63.5 mm maximum.

Performance

SYSTEM CALIBRATION 9 m matched transducer system	SCALE FACTOR 7.87 V/mm (200 mV/mil), +/-6.5% including interchangeability error
LINEARITY Less than +/-0.038 mm (+/-1.5 mil)	BANDWIDTH 0 to 10 kHz, +0/-3 dB
POWER -17.5 to -26 Vdc at 12 mA maximum	ENVIRONMENT -52 to +100 deg C operating

Compatibility

SYSTEM MATCHING CHECKLIST

01The probe length plus extension-cable length must equal the 9.0 m total system length specified by 330180-90-05.

02Use only documented 3300-series 5 mm or 3300 XL 8 mm components when published interchangeability and accuracy are required.

03The -90 mounting option is panel mount. DIN-mount and no-hardware variants use different ordering codes and are not automatic substitutes.

04Option 05 identifies the approval configuration; preserve the complete suffix when matching hazardous-area documentation.

FAQ

Q1How can I verify that the quotation is for 330180-90-05?

Check the complete nameplate and quotation. The first option must identify a 9.0 m system with panel mounting, and suffix 05 must identify the CSA, ATEX and IECEx approval configuration.

Q2How can I distinguish new, used and refurbished 330180-90-05 units?

Request current photos of the nameplate, terminals, probe-input connector, panel-mount base and factory packaging. A new unit should not show terminal marks, corrosion, rewiring residue or mounting wear.

Q3How can I assess whether a supplier is legitimate and reliable?

Ask the supplier to cite Baker Hughes datasheet 141194 Rev. AN, show the complete part number, provide traceable commercial documents and confirm that the offered mounting and approval codes match 330180-90-05.

Q4What should an engineer confirm before purchasing 330180-90-05?

Confirm the 9.0 m total system length, panel-mount footprint, compatible probe and extension-cable combination, -17.5 to -26 Vdc supply range, 12 mA maximum current and required approval documentation.

Q5What physical evidence should be requested before payment?

Request clear photos of the full nameplate, terminals, connector, four-hole mounting base, packaging labels and any serial or lot identifiers, with the quoted 330180-90-05 visible in the same evidence set.

Q6Can a similar 330180 suffix replace 330180-90-05?

Not automatically. -91 and -92 are different mounting variants; -50 selects a 5 m system, so calibration length or mounting hardware changes. Any replacement must preserve total system length, mounting method and approval option.

Recommend Models

RECOMMEND MODEL
VI702	EJA430E-JBB	3051DP3A
V18345-101025100	SS4302T01	369B1848G00
KJ3225X1-BA2	VE4003S2B6	5X00226G01
1X01177H01	1C31129G04	KJ3221X1-BA3
2SY5010-1	MAG5000	IMMFP12
KL3302X1-BA1	3051CG5A	KC3020X1-BK1
DPU55	KJ4110X1-BA1	2SA7031-0CE20-3BA
LR560	DSO14	KJ3243X1-BB1
1C31122G01	EJA110E-DMS4G-917DA	EJA110E-JFS
PHARPS32200000AB	TPS02	KL2001X1-BD1
SE4033S2B1	OC6000E	CE4022
3051CD0A	NTAI02	sipos7
5X00419G02	KJ2005X1-BA2	KJ3242X1-BA1
VE5137	SPHSS0	DS14
IMDSO14	SPIIT1	KJ2201X1-JA1
SE4016	EJA530A-ECS	1B30023H01
VE4002S2T2B8	1B30035H01	SPDSI14
SE4006P2	5X00875G01	KL3031X1-BA1
HSS13	KC3010X1-BA1	CON021
1X00188H01	SE4050E2C0	7005CTYNDMTLP4