ALL PRODUCTS

Bently Nevada 3300 XL NSv 330901-00-40-10-11-05 FluidLoc Proximity Probe

Bently Nevada 3300 XL NSv 330901-00-40-10-11-05 FluidLoc Proximity Probe

Bently Nevada 3300 XL NSv FluidLoc Proximity Probe

Complete Model

330901-00-40-10-11-05

Official Product Description

Bently Nevada 330901-00-40-10-11-05 3300 XL NSv probe with 1/4-28 UNF thread, 0.0 in unthreaded length, 4.0 in case, 1.0 m FluidLoc cable, protected ClickLoc connector and multiple approvals.

CORE FEATURE: One-metre FluidLoc NSv probe with a 4.0 in case and protected ClickLoc connection.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl nsv 330901 00 40 10 11 05 fluidloc proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Connections
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

330901-00-40-10-11-05 is a Bently Nevada 3300 XL NSv standard-mount proximity probe with a 1/4-28 UNF thread and no armor.

Its ordering code specifies 0.0 in unthreaded length, 4.0 in overall case length, 1.0 m total length, a protected miniature coaxial ClickLoc connector, FluidLoc cable and multiple approvals.

The matched 3300 XL NSv transducer system provides a published 1.5 mm linear range, 1.0 mm recommended gap, 7.87 V/mm nominal scale factor and 0 to 10 kHz response.

Technical Data

Complete model	330901-00-40-10-11-05
Brand	Bently Nevada
Product family	3300 XL NSv Proximity Transducer System
Product type	Standard-mount proximity probe without armor
Probe thread	1/4-28 UNF-2A
Unthreaded length	0.0 in
Overall case length	4.0 in
Total length	1.0 m (39 in), +30 percent / -0 percent
Connector and cable	Miniature coaxial ClickLoc connector with connector protector and FluidLoc cable
Probe dc resistance	4.2 plus or minus 0.5 ohm for the 1.0 m probe
Linear range	1.5 mm (60 mils), approximately 0.25 to 1.75 mm
Recommended gap	1.0 mm (40 mils)
Scale factor	7.87 V/mm (200 mV/mil), +12.5 percent / -20 percent including interchangeability error
Linearity	Deviation from best-fit straight line less than plus or minus 0.06 mm
Frequency response	0 to 10 kHz, +0 / -3 dB typical
Materials	PPS probe tip, AISI 304 stainless-steel case and 75 ohm FEP-insulated coaxial cable
Operating temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Storage temperature	-52 to +177 degrees C (-62 to +351 degrees F)
Minimum bend radius	25.4 mm (1.0 in)
Maximum thread engagement	0.375 in for the 1/4-28 probe case
Recommended probe-case torque	5.1 N m (45 in lb)
Agency approval option	05 - Multiple Approvals
Dimensions	Probe tip 5.26 mm maximum diameter; 0.0 in unthreaded length; 4.0 in case length; 1.0 m total length; cable 2.8 mm maximum outside diameter; connector 7.23 mm maximum outside diameter
Weight	Typical probe weight approximately 14 to 150 g; the official datasheet does not state the exact assembled weight of this complete configuration
Official source	Baker Hughes Bently Nevada datasheet 147385 Rev. R, pages 2-7, 11 and 30

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

FluidLoc cable

The selected cable construction limits fluid migration through the coaxial cable in process applications.

Protected ClickLoc connection

The gold-plated brass miniature coaxial connector locks in place and includes a protector.

Compact linear range

The NSv system is optimized for a 1.5 mm linear range with a 1.0 mm recommended gap.

Process-compressor use

Compact side-view characteristics and chemical resistance support process-compressor installations.

Connections

Probe connector	Miniature male coaxial ClickLoc connector, gold-plated brass
Connector protection	Fluorosilicone connector protector supplied by option 11
Probe cable	75 ohm FEP-insulated coaxial FluidLoc cable, 1.0 m total probe length
System compatibility	Mechanically and electrically compatible with 3300 NSv and previous 3300 RAM probe and extension-cable systems
Proximitor input	Use with the matched 3300 XL NSv Proximitor Sensor and approved extension-cable length

Installation

01 - Verify the complete code

Match 330901-00-40-10-11-05 on the quotation, product label, packaging and official order record.

02 - Prepare the mounting

Provide a 1/4-28 UNF mounting hole and keep thread engagement at or below 0.375 in.

03 - Apply correct torque

Use the published 5.1 N m recommended probe-case torque.

04 - Set the measurement gap

Establish the 1.0 mm recommended gap and verify matched-system output before commissioning.

05 - Protect the cable

Maintain at least 25.4 mm bend radius and keep the connector protector installed.

Environment

Temperature

Probe operating and storage range is -52 to +177 degrees C.

Probe materials

PPS sensing tip with an AISI 304 stainless-steel case.

Chemical resistance

NSv probes provide increased chemical resistance compared with earlier 3300 RAM probes.

Pressure sealing

A Viton O-ring seals differential pressure between the probe tip and case.

Approval configuration

The 05 suffix specifies the published multiple-approvals option.

Target calibration

Published system specifications use a Bently Nevada AISI 4140 steel target.

FAQ

Q1. How can the exact quoted complete model be verified?

Match 330901-00-40-10-11-05 on the quotation, probe label and packaging. Confirm 0.0 in unthreaded length, 4.0 in case, 1.0 m FluidLoc cable, protected ClickLoc connector, no armor and suffix 05.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the probe tip, 1/4-28 thread, 4.0 in case, full cable, connector, protector and label. Check for thread wear, cable repairs, contamination or replaced labels.

Q3. How should supplier legality and reliability be checked?

Verify the legal entity, address and payment beneficiary. The offer should state Bently Nevada, 330901-00-40-10-11-05, condition, quantity and return terms.

Q4. Which specifications must engineering confirm before purchase?

Confirm the 1/4-28 thread, 0.0 in unthreaded length, 4.0 in case, 1.0 m length, FluidLoc cable, protected ClickLoc connector, 1.5 mm range and NSv electronics compatibility.

Q5. What physical evidence should be requested before payment?

Ask for a date-marked photo set showing the 330901-00-40-10-11-05 label, probe tip, thread, 4.0 in case, full cable, connector, protector, packaging and approval markings.

Q6. Can another 330901 suffix replace this complete model?

Not automatically. Suffix positions change unthreaded length, case length, total length, connector protection, cable type and approvals. Use 330901-00-40-10-11-05 unless engineering approves the exact alternative.

Recommend Models

EVA-L-SHB 7-768-656	10E3T3N-2/50	MLDH1550P
EX950A-10	F-2224HC,783510-16100	AN8102-04
VX3134V-02-5G1	4.4T-10-RSC	806A0141800E11500
PKH-RG2AHL0061	VTM05SC24	MPAS-Q7594-LN01-T
FL2S-4J6SD-L3	IPM8-A6-FWL-20	YF2A14-100UB3XLEAX
FREJA 300	9905-866	593D157X9010D2T
30-VF3230-5D-01	H2007B-3	JFD-2000A
031SA400C000020	MZC1-2V2PS-KPO	EXFO IQS-605 \| IQS-605P-HS IQS-5240BP IQS-8130NGE
G205-16	140-MN-0100	KGX-24-PP
8US1261-5FM08	870-523/281-581	AID16D A03B-0807-C104
DILM7-10	4T-32009X	880PL-10mA-A
M2256305-UNC1	GE 353302G3	SL1-F
GE 0173B4772G001	DVB-S2 NTC/2280.xF 550-00049-000	WMZS2C40
700-BR310A1	A30QS300-4	CH13S
GE CR120B 04022	2010105S805 108 641809 + RAE 3130328	5711-1M
16PT FE 328091	WD1001FALS-403AA0	STD830-H2HS6AS-1-A-ADE-11S-A-10A0-00-0000
AMTPM-B AMT	EVC185 ASTAH040MSS0015H04	750-P5-G5-S5-HI-A20-R-E-H
ID3000	WMZH3D16T	44B-AAA-GDDA-1KB9
MOD32BNS	13VA3-8	RT1694/0-27
VCZAA3100/U	AR2-213 NPT 7-130	500-5M-25