ALL PRODUCTS

Bently Nevada 3300 XL 330103-02-08-10-02-CN 8 mm Proximity Probe | Original New

Bently Nevada 3300 XL 330103-02-08-10-02-CN 8 mm Proximity Probe | Original New

BENTLY NEVADA · 3300 XL 8 MM

330103-02-08-10-02-CN

M10 x 1 Proximity Probe without Armor

Unthreaded: 20 mm · Case: 80 mm · Length: 1.0 m

Connector: Miniature coaxial ClickLoc · Cable: Standard

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 330103 02 08 10 02 cn 8 mm proximity probe-1

Overview
Technical Data
Inquiry
Applications & Features
Operation
Construction
Installation
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

3300 XL 8 mm metric proximity probe

Bently Nevada 330103 is a standard-mount 3300 XL 8 mm proximity probe with an M10 x 1 thread and no armor. The complete ordering code specifies a 20 mm unthreaded length, 80 mm overall case length, 1.0 m total probe length and a miniature coaxial ClickLoc connector with standard cable.

Core selection point: M10 x 1 metric mounting with a 1.0 m standard-cable probe.

Technical Data

OFFICIAL DATA

Technical Data

Dimensions, weight and performance values from the Baker Hughes 3300 XL 8 mm system datasheet.

Complete model	330103-02-08-10-02-CN
Probe family	3300 XL 8 mm metric probe, without armor
Mounting thread	M10 x 1
Dimensions - probe tip	8.0 mm diameter
Dimensions - unthreaded length	20 mm
Dimensions - overall case length	80 mm
Dimensions - total probe length	1.0 m (3.3 ft)
Dimensions - cable outside diameter	3.68 mm maximum
Dimensions - connector outside diameter	7.24 mm maximum
Weight	Typical catalog probe weight for the 1.0 m configuration: 323 g (11.4 oz); packed shipping weight is not separately stated
Connector / cable	Miniature coaxial ClickLoc connector, standard cable
Linear range	2 mm (80 mils), approximately 0.25 to 2.3 mm from target
Scale factor	7.87 V/mm (200 mV/mil), +/-5% for a standard 1 m system at 0 to 45 degrees C
Frequency response	0 to 10 kHz, +0/-3 dB
Nominal probe resistance	7.59 +/-0.50 ohm for 1.0 m probe length

Inquiry

CONTACTSTELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

APPLICATIONS AND PRODUCT VALUE

Applications & Features

Application fit and configuration benefits for the 330103-02-08-10-02-CN probe.

Radial vibration

Non-contact shaft-vibration measurement in a correctly matched 3300 XL 8 mm transducer system.

Axial position

Relative shaft-position measurement for thrust and axial-displacement monitoring points.

Static gap and displacement

The system output changes with conductive-target distance, supporting static position and dynamic displacement observation.

M10 x 1

Metric standard mount

330103 identifies an M10 x 1 standard-mount probe without armor; the selected code specifies a 20 mm unthreaded length and 80 mm case.

ClickLoc

Defined cable interface

Option 02 specifies a miniature coaxial ClickLoc connector with standard cable and a 1.0 m total probe length.

System family

Matched-component serviceability

Use the correct probe, extension-cable and Proximitor Sensor system length. Similar-looking part numbers should not be substituted without verification.

Operation

MEASUREMENT PRINCIPLE

Operation

How the probe contributes to a complete 3300 XL 8 mm proximity transducer system.

Eddy-current sensing

The probe creates a non-contact measurement field at its tip. A conductive target changes the system response as gap distance changes.

Proportional output

The matched Proximitor Sensor converts probe-system behavior into a voltage proportional to target distance.

Static and dynamic information

The DC component represents average gap or position, while changing displacement provides vibration information.

System matching matters

Probe length plus extension-cable length must match the selected Proximitor Sensor system length; similar-looking components should not be mixed without verification.

Construction

PHYSICAL DESIGN

Construction

Confirmed materials, interfaces and dimensional features for the selected 330103 configuration.

Probe tip

8.0 mm PPS tip

The sensing tip is polyphenylene sulfide. The standard-mount probe uses an 8.0 mm tip diameter.

Probe case

Stainless steel M10 x 1 body

The case is AISI 303 or 304 stainless steel with M10 x 1 mounting thread.

Probe cable

75 ohm triaxial cable

The standard cable is FEP-insulated. Maximum outside diameter is 3.68 mm.

Connector

Miniature coaxial ClickLoc

The connector uses gold-plated conductive material and has a maximum outside diameter of 7.24 mm.

Installation

FIELD CHECKS

Installation

Mechanical fit, cable routing and environmental limits that should be checked before installation.

Mechanical fit

20 mm unthreaded length and 80 mm case

Verify the mounting bore, M10 x 1 thread, case clearance and the 15 mm maximum thread engagement.

Cable routing

25.4 mm minimum bend radius

Avoid tight bends and protect the probe-to-extension-cable connection from mechanical strain.

System-length match

1.0 m probe length

Select the extension cable and Proximitor Sensor so the complete system length is correct.

Environment

Standard probe range -52 to +177 degrees C

The probe uses a Viton O-ring pressure seal. Standard probes are not individually pressure-tested before shipment.

FAQ

BUYER AND ENGINEER CHECKS

FAQ

Six practical questions for evaluating the exact model and the supplier behind the quotation.

How can a buyer verify that the offered unit is the exact model?

Request time-stamped photos of the full probe, packaging label and nameplate showing 330103-02-08-10-02-CN. Compare the thread, case dimensions, cable length and connector with the official datasheet.

How can a purchaser distinguish new original stock from used or refurbished stock?

Require a written condition statement, clear close-up photos, packaging evidence and disclosure of any opened, repaired or tested history. A datasheet proves specifications, not the condition of an individual unit.

How should a qualified industrial automation supplier be screened?

Check the legal company name, registration, business address, traceable bank beneficiary, documented quotation terms and a consistent record of supplying identifiable industrial parts.

What should an engineer verify before approving this probe?

Confirm M10 x 1 mounting, 20 mm unthreaded length, 80 mm case length, 1.0 m probe length, standard ClickLoc connection and the required total 3300 XL system length.

What evidence should be requested before payment?

Ask for the exact-model quotation, current unit photos, nameplate image, packing details, test scope if offered, warranty wording, dispatch terms and written return or discrepancy procedure.

Can a similar 330103 code be accepted as a substitute?

Not automatically. Differences in unthreaded length, case length, probe length, cable type, connector and approval suffix can affect installation or system compatibility. Approve only after a line-by-line comparison.

Recommend Models

RANDOM STOCK REFERENCES

Recommend Models

Sixty models randomly selected from the supplied TXT lists; entries are not filtered by brand.

760ATC	50098566	1SDA074186R1
554 15D137510	ADAM-5051D	SDV531-L33/PRP
MF6FTJ0026	C65-EW	CCA634
677304	2814605 MCR-F-UI-DC	ASA5505
02-32281-0001	C1B	6ES7131-1BL01-0XB0
PLM 730	RXSF 1 RK 271 019-AH	PCOUMI2000
47-01180	2400381-001	3WL9111-0BA22-0AA0
RM-PS-024-01F	CPU2-3030D	5141SB
PRO 9105	SI816N SI816N.A001	GJR2240900R0001 XV370A-E 9024/021
UTR-BP 54 TA PN:9371636023	THA100	CN35BN3AB
2TMA020070N0006	PCB-FSC-960-03	DC551 / 1SAP220500R0001
DPS-750XB E98791-011	TSXRKY4EX	SX2 J4290-0001C
6131-74-102-500	1RK221052-AH	S100-02443
MSR138.1DP 440R-M23084	0J-0P4506AA	TST8801
LM-24-M	DT 370	VFC-131
40734-01G 3500/40M	800-001-0000	HE-67P3-0N00P
1756-PA75R/A	RTU32 UCN-26IOA/221B0130.D	GPSMAP3006C 011-01023-00
RM8I	440R-P226AGS-NNR	1KO3
BC7300	407766	323A3347P5
UT-H101	96M-180W-44 PN:50082040	16D45