Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000
bently nevada 990 08 50 01 05 990 vibration transmitter ready for ship-0

Bently Nevada transmitters

Home >  Products >  BENTLY NEVADA >  Bently Nevada transmitters

Bently Nevada 990-08-50-01-05 990 Vibration Transmitter

Brand
Bently Nevada
Model
990-08-50-01-05
Product
990 vibration transmitter
Output
4–20 mA, two-wire loop
Approx. weight
0.43 kg
Reference size
100.1 × 73.9 × 53.3 mm
Supply: one transmitter. Confirm the physical label and packing data before shipment.
Brand:
Bently Nevada
Spu:
990-08-50-01-05
Appurtenance:
  • Overview
  • Technical Data
  • Official Documents
  • Applications
  • Installation
  • Purchase Guide
  • FAQ
  • Commercial Info
  • Recommended Products
  • Recommended Products
Bently Nevada · 990 Vibration Transmitter

990-08-50-01-05

Two-wire, loop-powered 4–20 mA vibration transmitter for a matched 3300 NSv proximity system.

Scope of supply: One 990-08-50-01-05 transmitter only. Probe, extension cable, power supply, display and accessories are not included.

Product overview

This model converts a matched 3300 NSv proximity-probe signal to a proportional 4–20 mA loop output. Its code specifies 0–8 mils pp, 5.0 m, 35 mm DIN clips and option 05 approvals.

Exact order-code breakdown

Code Selection
990 990 transmitter family
08 0–8 mils pp (0–200 μm pp)
50 5.0 m system length
01 35 mm DIN-rail clips
05 CSA Division 2, ATEX Zone 0/2 and ABS

Technical Data

Key specifications

Parameter Manufacturer specification
Input Matched 3300 NSv probe and extension cable
Output 4–20 mA, two-wire loop powered
Supply +12 to +35 Vdc
Loop accuracy ±1.5%
Probe gap 0.5 to 1.75 mm
Frequency response 5 to 6000 Hz, +0/−3 dB
Scale factor 7.87 mV/μm (200 mV/mil)
Max loop resistance 1000 Ω at 35 Vdc
Operating temperature −35 to +85 °C
Weight 0.43 kg

Environmental limits apply to the transmitter and complete installed system.

Official Documents

Baker Hughes 990 product reference

screenshot_2026-09-02_19-06-30.jpg

Bently Nevada 990 vibration-transmitter product reference image. Verify the physical label against the order code.

Open the official Baker Hughes 990 Vibration Transmitter datasheet — 141612 Rev. Y

Searchable dimensional and order-code summary

Item Specification
Overall width 100.1 mm (3.94 in)
Inner width 69.8 mm (2.75 in)
Bulkhead height 73.9 mm (2.91 in)
Body height 63.5 mm (2.50 in)
Side dimension 53.3 mm (2.10 in)
Lower body dimension 42.6 mm (1.68 in)
Mounting 35 mm DIN-rail clip
990-08 0–8 mils pp full scale
50 5.0 m system length
01 35 mm DIN clips
05 CSA Division 2, ATEX Zone 0/2 and ABS

Applications

Typical applications

Application 01
Small pumps, motors, fans and centrifugal air compressors.
Application 02
Radial vibration or shaft-position measurement with a 4–20 mA loop.
Application 03
Industrial and maritime installations matching option 05.

Installation

Selection and installation notes

  • Use a compatible 3300 NSv probe and extension cable for the 5.0 m system length.
  • Mount securely on 35 mm DIN rail.
  • Provide +12 to +35 Vdc loop power.
  • Set probe gap within 0.5 to 1.75 mm.
  • Protect connectors and perform a loop check.

Purchase Guide

Before you order

  1. Confirm exact model 990-08-50-01-05.
  2. Verify range, system length and DIN mounting.
  3. Confirm option 05 approvals suit the site.
  4. Order probe and extension cable separately if required.
  5. Verify stock, calibration, warranty and shipping.
Quotation scope: One 990-08-50-01-05 transmitter only. Probe, extension cable, power supply, display and accessories are not included.

FAQ

Frequently asked questions

Q: Does it include the probe system?
No, the quotation covers one transmitter only.
Q: What is the output?
Two-wire, loop-powered 4–20 mA.
Q: Can any probe be used?
No, use a compatible matched 3300 NSv system.
Q: What is option 05?
CSA Division 2, ATEX Zone 0/2 and ABS.

Commercial Info

Commercial information

Condition Original new; confirm seal and label photos.
Quoted item One exact-model 990 vibration transmitter.
Excluded Probe, cable, monitor and accessories unless listed.
Testing / warranty Scope and terms are stated in the formal quotation.
Dispatch / payment Confirmed after quantity and destination are verified.

Request a quotation

Send the full model, quantity and destination.

[email protected]WhatsApp +86 18159889985

Recommended Products

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000

Get a Free Quote

Our representative will contact you soon.
Email
Name
Mobile
Company Name
Message
0/1000