ALL PRODUCTS

Bently Nevada PROXPAC XL 330881-28-00-265-00-02 Proximity Transducer Assembly | Original New

Bently Nevada PROXPAC XL 330881-28-00-265-00-02 Proximity Transducer Assembly | Original New

BENTLY NEVADA · PROXPAC XL

330881-28-00-265-00-02

Metric Self-Contained Proximity Transducer Assembly

Probe: 3300 XL 8 mm with approvals · Cable: 1.0 m integral probe cable · Penetration: 265 mm · Protection: IP66 / Type 4X
Fittings / Mounting: No fittings · 3/4-14 NPT mounting

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada proxpac xl 330881 28 00 265 00 02 proximity transducer assembly-1

Overview
Technical Data
Inquiry
Applications
Construction
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

OFFICIAL PRODUCT OVERVIEW

PROXPAC XL metric proximity assembly

Bently Nevada 330881-28-00-265-00-02 combines a 3300 XL 8 mm probe, its Proximitor sensor and a protected housing in one self-contained metric assembly. The code specifies the approved probe option, no standoff adapter, 265 mm probe penetration, no fittings and 3/4-14 NPT mounting thread.
Core selection point: Self-contained 3300 XL measurement system with 265 mm probe penetration.

Technical Data

VERIFIED SPECIFICATIONS

Official configuration data

Key dimensions, weight, construction and ordering-code details for this complete model.

Complete model	330881-28-00-265-00-02
Product family	Bently Nevada PROXPAC XL Proximity Transducer Assembly
Product type	Metric self-contained proximity transducer assembly
Dimensions	Housing depth 92.7 mm; sleeve diameter 12.7 mm; probe penetration 265 mm
Probe penetration dimension	265 mm, option 265
Weight	1.44 kg (3.2 lb) typical with 0.3 m sleeve length
Probe and approval option	28: 3300 XL 8 mm probe with Multiple Approvals
Standoff adapter	None, option 00
Fittings option	00: no fittings; two plugs and two washers
Mounting thread	02: 3/4-14 NPT
Power requirement	-17.5 Vdc to -26 Vdc without barriers; 12 mA maximum
Linear range	2 mm (80 mils), approximately 0.25 mm to 2.3 mm from target
Scale factor	7.87 V/mm (200 mV/mil) ±5% under stated conditions
Frequency response	0 to 10 kHz, +0 / -3 dB
Protection / materials	IP66 and Type 4X; UV-resistant glass-reinforced conductive PPS housing

Inquiry

DIRECT CONTACT

STELLA

Fast access to the person handling product and quotation questions.

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

FIELD APPLICATIONS

Integrated proximity measurement for exposed field locations

The PROXPAC XL assembly combines a 3300 XL 8 mm probe, Proximitor sensor and protective housing into one field-mounted package. This arrangement shortens the internal transducer interconnection, provides external access for setup and sends the conditioned signal to the monitoring system through field wiring.

Integrated signal chain The proximity probe and Proximitor sensor are housed together, eliminating the separate extension cable normally used between these components.	Environmental protection The IP66 and Type 4X enclosure protects the electronics and probe connection in exposed machinery areas when the housing and conduit entries are installed correctly.
External setup access The 265 mm sleeve provides a defined penetration while the accessible housing supports probe gap adjustment, terminal wiring and maintenance outside the machine case.	Monitor connection Shielded field wiring can carry the conditioned signal to compatible monitoring equipment over the published distance, subject to grounding and installation requirements.

Construction

BUILD & CONNECTION

Construction and interfaces

Physical design, materials and connection points for this product.

Housing: UV-resistant glass-reinforced PPS with conductive fibers and a sealed cover.
Probe system: 3300 XL 8 mm probe with 1.0 m 75 ohm FEP-insulated triaxial cable and ClickLoc connector.
Sleeve: AISI 304 stainless steel sleeve with 12.7 mm diameter and 265 mm penetration setting.
Field connection: Field wiring connects directly from the integrated Proximitor sensor to the monitor.

Installation

FIELD PRACTICE

Installation checkpoints

Key steps for correct mechanical and electrical installation.

01	Verify the 265 mm penetration and 3/4-14 NPT mounting thread against the machine drawing.
02	Mount the outer sleeve securely and keep the housing accessible for adjustment and wiring.
03	Gap the 3300 XL 8 mm probe within the published 2 mm linear range and target geometry limits.
04	Use 0.2 to 1.5 mm² shielded field wiring and maintain the required grounding and barrier arrangement.
05	Confirm the Multiple Approvals option and safe-use drawing for the classified installation.

Compatibility

SYSTEM FIT

Compatibility and selection checks

Confirm mechanical fit, signal path and ordering-code requirements.

Monitor wiring: Supports field wiring up to 305 m between the integrated Proximitor sensor and compatible monitors.
Target geometry: Minimum flat target diameter is 15.2 mm; recommended shaft diameter is 76.2 mm.
Mechanical fit: Check the 265 mm penetration, 12.7 mm sleeve and 3/4-14 NPT mounting thread.
Environmental fit: Use within the published IP66 / Type 4X limits and approval conditions.

FAQ

BUYER CHECKLIST

Six practical verification questions

Model-specific checks for engineering and procurement review.

Q1. How can a buyer verify the exact PROXPAC XL configuration?

The nameplate and quotation should show 330881-28-00-265-00-02: approved 3300 XL 8 mm probe, no standoff, 265 mm penetration, no fittings and 3/4-14 NPT mounting.

Q2. How can New, Used and Refurbished stock be distinguished?

Request current photos of the PPS housing, cover, sleeve, probe tip, terminals and label. Check for opened seals, field wiring residue, damaged threads or altered identification.

Q3. What should be checked before approving a supplier?

Confirm legal company identity, matching payment beneficiary, traceable quotation and the ability to provide time-stamped photos of this exact assembled part.

Q4. Which specifications should an engineer confirm?

Verify the 265 mm penetration, -17.5 to -26 Vdc supply, 2 mm linear range, 3/4-14 NPT mounting and the applicable approval drawing.

Q5. What evidence should be requested before payment?

Ask for complete assembly photos, probe-tip and terminal close-ups, the 330881-28-00-265-00-02 label and available traceability or test records.

Q6. Can a different PROXPAC XL suffix be substituted?

Not automatically. Probe approval, standoff, penetration, fittings and mounting-thread options change the installation and compliance requirements.

Recommend Models

Recommend Model

IE-3000-8TC	JMG 4TKNX IP20	5010G
H3C X362 5500 / 5130 HI JG544A PSR720-56AH	BK9053	MPPIO-T0258
Mipro ACT-311B	FMH2A09TR-EN43EZ	EKA173/5
025-40900-007 TRE 40-55L	EL3910A8008	CG204
DH 100	ASM124F120	NTC-40WV M2M
UDK-04-10 (KNX) 215.0030.00	MFD-AC-R16	M1032-61605
CPM06-BN	8102	FX2202CPD
ABB RXSF1-220-250V RK 271 017-AS	ABB 2CL0813072ABB	L5101D20
KL4408	SL5/1	3500/60 PWA 133811-01D
C2IR-8 6500429	MS-FEC2611-0	OLS120
MSE-C20	OKP0N34	CS7-PV-02
SR2E201FU	HFRC-01C	DS-XF70V
TPS-6L	TK561.F.360.11/30.S.K5.10.S10.LD2-1130	M7410E5001
TL-LC-100SCSM	CSD-SA1E1-1	CX1100-0002
6ES7403-1JA01-0AA0	GCD-0001	3G2080-EU
13985-301	1Saj530000R0100	3005A
ABB RXSF1-110-125V	MTS1226	abb 2cdg110041R0011
XFL524B	3RP1505-1RW30	HDA032Z
RO8-1.4 C29F	FUJI FA-2016E1	02-70325-02
4000P 54X209582	QSA224DC SCA068	CC-PAIH01 51405038-175