ALL PRODUCTS

Siemens 6GK5206-1BB10-2AA3 SCALANCE X206-1 Managed Switch

Siemens 6GK5206-1BB10-2AA3 SCALANCE X206-1 Managed Switch

Product Name: SCALANCE X206-1 Managed Industrial Ethernet Switch

Brand Name: Siemens

Model Number: 6GK5206-1BB10-2AA3

Place of Origin: Germany

Warranty: 12 Months

Whatsapp: +86 18020776782

Email: [email protected]

Appurtenance:

siemens 6gk5206 1bb10 2aa3 scalance x206 1 managed switch-1

Overview
Fiber Link Planning
Description
Ring Diagnostics
Specifications
Commercial Term
Contact info
FAQ
Other Products
Recommended Products

Managed Industrial Ethernet switch with six copper ports and one multimode fiber uplink

SCALANCE X206-1 combines six 10/100 Mbit/s RJ45 ports with one 100 Mbit/s multimode BFOC port, PROFINET diagnostics, integrated redundancy management, a signaling contact and optional C-PLUG. Exact port mapping and ring behavior are central to a reliable replacement.

Port map and ring checkConfirm every copper device, the BFOC multimode fiber path, ring-manager or standby role, PROFINET device name, IP settings, VLAN and management configuration, redundant 24 V feeds, signaling contact and C-PLUG contents before moving cables.

Fiber Link Planning

The 100BaseFX path must be matched as an optical circuit, not only as a connector shape.

Media match

Confirm multimode fiber, ST/BFOC connectors, wavelength and the far-end 100BaseFX interface.

Path condition

Inspect and clean both connectors, verify Tx/Rx routing and record optical alarms or intermittent loss.

Copper map

Label all six RJ45 destinations, speed and duplex behavior and any critical controller or HMI dependency.

Description

6GK5206-1BB10-2AA3 is the SCALANCE X206-1 managed Industrial Ethernet switch for mixed copper and multimode fiber plant networks. It supports PROFINET IO diagnostics, web and CLI management, SNMP, MRP and HRP ring functions and optional configuration storage on C-PLUG.

A controlled exchange begins with a labeled port map and an exported configuration. Record fiber type and connector condition, ring role, device name, IP parameters, firmware, power inputs and alarm-contact logic, then restore and test the switch outside the production ring where possible.

Ring Diagnostics

Preserve redundancy settings and prove recovery behavior before the switch returns to production service.

Ring role

Record MRP or HRP mode, manager setting, standby path and expected recovery behavior.

Configuration restore

Export the configuration or verify the C-PLUG contents before removing the original unit.

Alarm evidence

Capture LEDs, signaling-contact state, port counters, error statistics and PROFINET diagnostics.

Specifications

Product type designation

SCALANCE X206-1

Order number

6GK5206-1BB10-2AA3

Copper ports

6 x RJ45, 10/100 Mbit/s

Fiber port

1 x 100 Mbit/s multimode ST (BFOC)

Network functions

Managed switch with PROFINET IO diagnostics

Redundancy

MRP and HRP ring manager supported

Configuration media

C-PLUG supported

Supply

Redundant 24 V DC; maximum current 0.22 A

Signal contact

24 V DC, maximum 0.1 A

Operating range

-40 to +60 degrees C; IP30

Mounting

DIN rail, S7-300 rail or wall mounting

Dimensions / weight

60 x 125 x 124 mm; 0.78 kg

Commercial Term

Quotation

Current price and availability

Payment

T/T or agreed terms

Lead time

Confirmed with quotation

Shipping

DHL, FedEx, UPS or agreed freight

Warranty

12 months

Contact info

CONTACT

Jim Pei

[email protected]

+86 180 2077 6782

FAQ

How can I verify that 6GK5206-1BB10-2AA3 fits the installed network?

Match the exact X206-1 order number, six copper ports, one multimode BFOC fiber port, 24 V redundant supply and signaling contact. Confirm the required MRP or HRP role, PROFINET device name and C-PLUG use before ordering.

Why can the fiber port on 6GK5206-1BB10-2AA3 remain down after replacement?

Verify multimode fiber and the 100BaseFX far-end port, inspect and clean both ST/BFOC connectors and confirm Tx-to-Rx routing. Check the partner link, port status and error counters before changing ring settings.

How should a PROFINET installation be transferred to 6GK5206-1BB10-2AA3?

Preserve the device name, IP settings, port assignments and STEP 7 configuration. Restore the reviewed switch configuration, verify PROFINET diagnostics and reconnect one documented segment at a time before validating controller communication.

What should be checked before reusing a C-PLUG with 6GK5206-1BB10-2AA3?

Confirm that the C-PLUG belongs to the same approved configuration and hardware family, inspect its status and keep an exported backup. Power down according to the service procedure before moving it, then verify the restored IP, ring and port settings.

Why can 6GK5206-1BB10-2AA3 report a signaling-contact fault while network traffic still passes?

Review the configured alarm mask, both 24 V feeds, fiber and copper link expectations and ring state. A missing monitored port or supply can operate the signaling contact even when unrelated forwarding remains available.

How should ring recovery be tested after installing 6GK5206-1BB10-2AA3?

Confirm the intended MRP or HRP manager role, establish a stable closed ring and record normal LEDs. Open one approved link during a maintenance window, verify recovery and controller diagnostics, then restore the link and confirm the ring returns to normal.

Other Products

DX3 406295	031-02476-001	1492-IFM40F-FS24A-4
AP7920	RMA42	2400B1040
GT-1575QBUSL	46779C-4 PR50	SBD2D-06
83MM350	0160-2720 -144400-0004	HDX8000 HD 2215-27952-002
C79451-A3364-B127	330180-51-05	SS-MPPT-15L
CRM-4	CN-40P	CV-131A
RE-3D-18KW	50080121-001	IC200CHS022L
BNC-2121 166906C-01	LIP-ME201C	CC-TAIX01 51308363-175
MIX-M500MAP	GE IC200CHS022L	BNC-2121/166906C-01
0-073-0285-0	490NAC0100 MODICON M580 HSBY RG45	QSWS2-5BRLIRN-WH