| Brand Name: | EPRO |
| Model Number: | PR6423/003-110 CON021 |
| Place of Origin: | Germany |
| Warranty: | 12 Months |
|
Sales
Jim Pei
|
Email
[email protected]
|
Phone/Whatsapp
+86 18020776782
|
| Model Number | PR6423/003-110 CON021 |
| Linear measurement range | 2 mm |
| Initial air gap | 0.5 mm |
| Incremental scale factor | 8 V/mm ±5% at 0–45 °C |
| Deviation from best-fit straight line | ±0.025 mm at 0–45 °C |
| Minimum shaft diameter | 25 mm |
| Standard target material | 42CrMo4 / AISI 4140 |
| Sensor ingress protection | IP66 to IEC 60529 |
| Sensor operating temperature, including 1 m cable | −35–180 °C |
| Cable and connector temperature | −35–150 °C |
| Sensor tip material | PEEK |
| Sensor case material | Stainless steel |
| Cable insulation | PTFE |
| Connector material | Nickel-plated brass |
| Cable length tolerance | 0 to +10% |
| Converter frequency range, −3 dB | 0–20000 Hz |
| Converter rise time | <15 µs |
| Converter operating temperature | −30–100 °C |
| Converter vibration rating | 5 g at 60 Hz and 25 °C |
| Converter ingress protection | IP20 |
| Supply for −4 to −20 V output | −32 to −23 V DC |
| Supply for −2 to −18 V output | −32 to −21 V DC |
| Terminal wire cross-section, maximum | 1.5 mm² |
| Standard-range linearity error | ≤1.0% |
| Case thread | M10 × 1 |
| Cable armor | None |
| Total cable length | 5.0 m |
| Adapter configuration | Without adapter plug |
| Probe cable termination | Lemo |
| Converter mounting | Four M5 × 20 screws |
| Converter housing | LMgSi 0.5 F22 |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3-7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | Brand new, In Stock |
EPRO PR6423/003-110 CON021 uses a 5.0 m, adapter-free -110 cable configuration and a standard CON021 converter. The probe cable has a Lemo termination. The PR6423 sensor and its converter are separate physical components. The sensor carries IP66 protection, while CON021 is rated IP20. Their different protection levels affect where each part can be installed.
The sensing end can occupy a location that is unsuitable for an unprotected converter. Cabinet planning must use the converter’s own environmental limits. Keep the analog connection to the monitoring channel apart from the mechanical placement of the probe. The measurement is relative to a conductive target rather than a direct casing-acceleration reading. Installation records should retain both component identities and the continuous cable arrangement.
Observe shaft displacement in a compatible gearbox condition-monitoring installation.
Bring the probe signal through its converter to the matching machinery monitoring input.
Maintain the specified continuous cable arrangement when replacing a probe in an existing measurement chain.
The probe measures displacement relative to its conductive target. Casing vibration measurement uses a different sensor arrangement.
Use the matching eddy-current converter and the correct sensor calibration. Do not select a conditioner solely from its supply voltage.
No. The probe operates without contact across an air gap to the conductive target.
No. A general sensor or converter data sheet does not establish an unlisted approval for the individual supplied unit.
Relevant sensor and converter technical pages can be supplied with the order for identification and installation planning.
No. Match the converter output signal and polarity to the receiving monitoring input before connection.
Our team members have an average of more than 10 years of industry experience. We have worked with customers worldwide, including those from India, Germany, Sweden, Italy, Russia, Venezuela, Israel, and many other countries. Throughout our careers, we have collectively completed over 3,000 orders and established long-term business relationships with customers across nearly 30 countries.
We can often identify a product’s manufacturer, series, configuration, and function from its model number or nameplate photo. We also understand how revisions, firmware, and specifications affect compatibility and whether an alternative model can be used safely.
In Practice: An Indian customer urgently needed a discontinued control module after several suppliers reported no stock. We identified its exact revision and function from the nameplate, checked compatible alternatives, and contacted factory and warehouse channels to locate matching inventory. After installation, the customer confirmed that the module operated correctly and later asked us to source additional spare parts.
Our team treats every inquiry sincerely and answers every question patiently. Even for complex requests, we verify and respond to each detail instead of providing a rushed or uncertain answer.
In Practice: A German customer sent a mixed list of automation products and asked repeated questions about revisions, condition, photos, and delivery. Our team organized the requirements, checked every item, and replied point by point. The customer said our detailed communication made the purchasing decision easier and continued sending us new inquiries.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
| LV-125 | AT-HDMI-V4 | MMS-A-350 |
| GA-300-E02 | GD250W4N | iMC2S-LV-D-1RJ45-1SFP |
| MB-6279 | SP3-GT35 | DI32R-L |
| SISTP1013-141-LRT | FCM-240V | PS-10-1CU |
| ITRR832-001 | CK504 | Safety-MS2 |
| NC-540-1-1-5 | OK34A | CP17971 |
| LD-C4ZB-H2-21 | PR160 | FG-20i |
| EDS-405A-SS-SC | DDBC1200 | HDL-M/R8.16.1-232 |
| NC3FD-LX | GFG-8216A | APL21-06E |
| TS5810N | XG-E700 | E0002181 |
| INT-1534-M-5-M-111 | RX1210T | MR18-HW |
| SS-4BHT-72 | EHS-220 | CLIOP831A |
| DLAF8000 | EZV516 | PCO3010AL0 |
EN
