Product Name: Analog Input Modul
Brand Name: GE
Model Number:8810-HI-TX-01
Country of Origin:USA
Warranty: 12 Months
Whatsapp：+86 18159889985
Email：[email protected]
Brand Name: |
General Electric |
Model Number: |
8810-HI-TX-01 |
Country of Origin: |
USA |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
Delivery time in stock |
Payment Terms: |
T/T |
|
Sales Manager: |
Stella |
|
Send an email: |
|
|
Contact in Whatsapp: |
|
Parameter |
Specification |
|
Manufacturer |
GE (now Emerson) |
|
Product Name |
4-20 mA Analog Input Module with HART |
|
Catalog Number |
8810-HI-TX (also known as 8810-HI-TX-01) |
|
Product Type |
Safety Analog Input Module (SIL 2 certified) |
|
Number of Channels |
8, single-ended |
|
Nominal Signal Range |
4 to 20 mA |
|
Full Signal Range |
0.25 to 24 mA |
|
Output Voltage (@ 20 mA) |
10.2 V (min.) |
|
Output Current |
28 mA (max.) |
|
Accuracy (at 25°C) |
±0.1% of span |
|
Temperature Coefficient |
38 ppm/°C |
|
Resolution |
16 bits |
|
Repeatability |
0.05% of span |
|
Data Format |
16-bit unsigned (0-25mA = 0-65,535) |
|
HART Data Format |
IEEE754 floating point |
|
Isolation (any channel to Rails) |
250 VAC RMS |
|
System Power Supply |
12 V DC (Railbus) |
|
System Power Current |
50 mA (typical), 70 mA (max.) |
|
Bussed Field Power Supply |
24 V DC ±10% |
|
Bussed Field Current |
350 mA (2-wire TX max.), 110 mA (4-wire TX max.) |
|
Response Time (4-20mA Mode) |
25 ms (max.) |
|
Response Time (HART Mode) |
0.75 s per channel |
|
Line Fault Detection: Short Circuit |
>23.5 mA |
|
Line Fault Detection: Open Circuit |
<0.5 mA |
|
Hazardous Area Protection |
EEx nA [nL] IIC T4 |
|
Hazardous Location (FM and CSA) |
Class 1, Div.2, Grps A,B,C,D T4 |
|
FM Non-incendive Field Wiring Parameters |
Voc = 28.7V; Isc = 33mA |
|
Module Key Code |
A1 |
|
Module Width |
42 mm |
|
Weight |
200 g |
|
Configurable Parameters |
Alarms (high, high-high, low, low-low); Alarm Deadband; Input Filter Time Constant; Input Dead Zone; Drive on Fault State; HART Variable and Status Reporting |
The 8810-HI-TX-01 (also listed as 8810-HI-TX ) is an 8-channel safety analog input module from GE's PAC8000 SafetyNet system, designed for SIL 2 safety-related applications. The 8810-HI-TX-01 converts 4-20 mA signals from 2-wire or 4-wire transmitters into digital values. It features 16-bit resolution, ±0.1% span accuracy, and supports HART pass-through for remote device configuration and diagnostics. Certified for Class 1 Division 2 / Zone 2 hazardous areas, the 8810-HI-TX-01 delivers reliable performance in extreme temperatures from -40°C to +85°C.
Operating Temperature：-40°C to +85°C
Storage Temperature：-40°C to +85°C
Relative Humidity：5% to 95% non-condensing
Hazardous Area Approval：Class 1, Division 2, Groups A, B, C, D
Hazardous Area Approval (IEC)：Zone 2 (EEx nA [nL] IIC T4)
Field Circuit Type：Non-incendive (non-energized)
Isolation Voltage：2500V
Ingress Protection：IP65
Shock & Vibration：Designed for harsh industrial environments
Q1: What is the 8810-HI-TX-01 used for?
A1: The 8810-HI-TX-01 is an 8-channel safety analog input module that converts 4-20mA signals from field transmitters into digital data for safety controllers in SIL 2 applications.
Q2: What is the safety certification of the 8810-HI-TX-01?
A2: The8810-HI-TX-01is certified for SIL 2 safety-related applications per IEC 61508.
Q3: Does the 8810-HI-TX-01 support HART communication?
A3: Yes, the 8810-HI-TX-01 supports HART pass-through, variable reporting, and status reporting.
Q4: What types of transmitters can the 8810-HI-TX-01 connect to?
A4: The 8810-HI-TX-01 supports 2-wire and 4-wire transmitters with 4-20mA output.
Q5: Can the 8810-HI-TX-01 be used in hazardous locations?
A5: Yes, the 8810-HI-TX-01 has non-incendive field circuits and is approved for Class 1 Division 2 and Zone 2 hazardous areas.
Inquiry Now: [email protected]
EN
