Siemens 6AV3617-1JC30-0AX2 is a SIMATIC OP17/DP12 operator panel with an LED-backlit LC display for 4 x 20 or 8 x 40 characters. It supports native drivers for SIMATIC S5, 505, S7 and M7 systems and PROFIBUS DP communication up to 12 Mbaud.
This discontinued text panel is normally replaced within an existing machine application. Confirm the project file, controller driver, bus parameters, connector layout and panel condition before installing another unit.
| Item | Details |
|---|---|
|
Quotation
|
Contact us for current price and availability
|
|
Payment
|
T/T and other agreed terms
|
|
Lead time
|
Confirmed with the quotation
|
|
Shipping
|
DHL, FedEx, UPS or agreed freight service
|
|
Warranty
|
12 months
|
| Technical parameter | Value |
|---|---|
|
Product type designation
|
SIMATIC OP17/DP12
|
|
Article number
|
6AV3617-1JC30-0AX2
|
|
Display
|
LED-backlit LC display
|
|
Character display
|
4 x 20 or 8 x 40 characters
|
|
Communication
|
PROFIBUS DP
|
|
Maximum PROFIBUS rate
|
12 Mbaud
|
|
Supported systems
|
SIMATIC S5, 505, S7 and M7
|
|
Drivers
|
Native controller drivers
|
|
Approvals
|
UL and CSA
|
|
Lifecycle
|
Discontinued legacy product
|
| CONTACT |
Jim Pei
|
|---|
The OP17/DP12 provides text-based machine visualization and keypad operation for legacy Siemens and compatible controller environments. Its higher PROFIBUS DP rate supports installations configured for up to 12 Mbaud.
Successful replacement depends on the original ProTool-era project and controller settings. Capture the bus address, transmission rate, driver, cable termination and application data before disconnecting the panel.
SupplyPLCs supports industrial automation buyers, maintenance teams and system integrators with model-specific sourcing and documentation assistance. Each quotation is checked against the complete order number, requested condition and destination requirements.
To reduce compatibility risk, send clear nameplate photos, installed hardware and software information, machine documentation and the required delivery date. These details help compare the requested item with available stock or a suitable successor before shipment.
Q1. How should I verify that 6AV3617-1JC30-0AX2 matches the OP17/DP12 panel on my machine?
Answer: Compare the complete nameplate, controller driver, 12 Mbaud network requirement, connector arrangement, supply wiring and front-panel opening. Confirm that the original operator project can be downloaded to the offered unit.
Q2. What should I back up before removing 6AV3617-1JC30-0AX2 from a working installation?
Answer: Save the complete operator-panel project, record the PROFIBUS address and baud rate, export recipes or application data when possible, and photograph connectors, termination switches and grounding points.
Q3. What should I check when 6AV3617-1JC30-0AX2 powers up but cannot exchange data with the controller?
Answer: Confirm the configured driver, panel address and baud rate; inspect the bus connector, termination and shield; and compare the downloaded project with the archived machine version before replacing communication hardware.
Q4. How can I investigate intermittent keys or display behavior on 6AV3617-1JC30-0AX2?
Answer: Measure the supply during operation, inspect cabinet temperature, grounding, front seal and internal connectors, and record whether vibration or warm-up changes the fault. Back up the project before repair.
Q5. How should I test 6AV3617-1JC30-0AX2 after a replacement is installed?
Answer: Restore the approved project and network settings, test every screen and key, verify alarms and acknowledgements, confirm PLC data exchange, and run the machine through a controlled service test before production release.
Q6. Which information should I provide when sourcing 6AV3617-1JC30-0AX2 for a legacy controller system?
Answer: Send the panel nameplate, controller family, project software version, PROFIBUS settings, connector photos, observed fault, required condition, destination and delivery deadline.
|
5828V
|
2CDG 110 024 R0011
|
PCOUMI2000
|
|
BP-2002
|
5ST3
|
Q631 0071 R0111
|
|
G9DDT10
|
32510.05
|
ACTFM1UF2SC3PMM
|
|
1222210010
|
120B1010
|
DDRC420FR
|
|
TK_C21P
|
ABB 2CDG 110 065 R0011
|
NXG-504
|
|
ABB DC522 1SAP440600R0001
|
750-342
|
EASY620-DC-TE
|
|
4110-073-0201-1
|
HB276HD2
|
TSW-1060-LB-B
|
|
KFD0-RSH-1
|
BMXEHC0800
|
ICUSB2324I
|
|
ABB 1KGT004900R5012
|
2CDG 110 036 R0011
|
T600HCP-4TR
|
|
411 0-073-0201-1
|
710-U0086-04P
|
EC2895
|
EN
