| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6DL1132-6BH00-0EH1 |
| Digital output channels | 16 |
| Rated supply voltage | 24 V DC |
| Permissible supply range | 19.2–28.8 V DC |
| Nominal electronics current without load | 60 mA |
| Maximum electronics current without load | 70 mA |
| Rated output voltage | 24 V DC |
| Minimum power loss | 1.2 W, load dependent |
| Maximum address area | 8 bytes |
| Output current per channel | 0.5 A |
| Maximum module output current | 8 A, subject to thermal derating |
| Short-circuit response threshold | 0.7–1.3 A typical; up to 2.6 A in I/O redundancy |
| Wire-break test current | 0.7 mA; doubled in I/O redundancy |
| Inductive shutdown voltage limitation | L+ minus 37–41 V |
| Maximum lamp load | 5 W |
| Load resistance range | 48 ohms–12 kohms |
| Output turn-on delay | 50 µs typical, resistive load |
| Output turn-off delay | 100 µs typical, resistive load |
| Maximum resistive switching frequency | 100 Hz |
| Maximum inductive switching frequency | 2 Hz |
| Maximum lamp switching frequency | 10 Hz |
| Horizontal total current at 60 °C | 5.5 A maximum |
| Horizontal total current at 70 °C | 3 A maximum |
| Vertical total current at 40 °C | 6.33 A maximum |
| Vertical total current at 50 °C | 4.67 A maximum |
| Vertical total current at 60 °C | 3 A maximum |
| Shielded cable length | 1,000 m maximum |
| Unshielded cable length | 600 m maximum |
| Isolation test voltage | 1,500 V DC for 1 min, type test |
| Operating temperature, horizontal | -40 to +70 °C |
| Operating temperature, vertical | -40 to +60 °C |
| Module color code | CC02 |
| Firmware version | V1.0 |
| SPPA-T3000 integration | V8.0 or later |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6DL1132-6BH00-0EH1 is an ET 200SP HA digital output module for industrial process automation. It provides sixteen current-sourcing outputs. Each channel is rated for the specified DC load. Channel diagnostics cover wiring and output faults. The module supports I/O redundancy with the appropriate terminal block.
The 6DL1132-6BH00-0EH1 connects a compatible distributed station to field actuators. It is suitable for switching matching loads within the module and channel limits. Configured substitute values support the defined response to communication conditions. Redundant operation requires the matching terminal arrangement and engineering configuration. Thermal derating and cable impedance must be considered when planning the installation.
Switches compatible field loads through individually configured output channels.
Supports redundant control using the specified terminal-block arrangement.
Reports channel wiring and output errors to assist maintenance of the field circuit.
The redundancy configuration requires the matching M1 terminal block.
Parallel connection is not permitted for uprating; the documented parallel use is redundant control of a load.
It is a current-sourcing digital output module.
The fault-current threshold requires sufficiently low-resistance wiring; check cable cross-section and length.
Ask Jim for actual-item photographs, the stated condition and available inspection details. The quoted warranty is 12 months under the agreed terms.
Confirmed in-stock goods are dispatched immediately after payment is received. Courier and tracking information are supplied after shipment.
Germany – A Germany customer urgently needed a replacement for a discontinued automation component. After reviewing the product label, technical parameters, and application details, our engineers recommended a compatible alternative and provided photos and test videos before shipment. The alternative performed well, enhancing the customer's confidence in our technical capabilities and leading to multiple repeat orders.
India – An Indian customer still had doubts after initial online communication with us, so they visited our company in person for a face-to-face meeting and product inspection. This visit increased the customer's trust and led to the successful placement of their first order. Over the next few years, we completed multiple orders and established a stable, long-term partnership.
Malaysia – A Malaysia customer needed a specific automation component and compared products and services from several suppliers online. After nearly three weeks of careful consideration, our sincere communication, professional service, and reliable product quality won the customer's trust. After receiving the product and using it for several weeks without any problems, the customer gave us positive feedback and subsequently placed multiple orders.
| D5096S | DDBC320-DALI | EY-IO550F001 |
| HWS600-24/LNT | RMC3 | PCO3000AL0 |
| ir425-D4-2 | DDRC820FR | EVD0000410 |
| MTL5582B | UCS-52 | DDMC802 |
| IRDH275-435 | EY-IO572F001 | EVD0000E51 |
| HWS600-48 | PGDT04000F020 | EVDCU00E21 |
| TIS-DMX-48 | PCO3010AL0 | MCW-211-SM-LC15 |
| PGD1RH0F00 | PCO3000ES0 | PGD0000W00 |
| MTL5531 | MTL4031 | EY-IO551F001 |
| Mtl45/46/5500 | MTL-FS32 | DMC-C 6504086 |
| MTL4513 | MTL4599N | MTL5032 |
| D320DIM1624D | RM8I KNX 4940215 | SF230A-S2 |
| C2IR-8 6500429 | D5014S | BN5930.48 |
EN
