| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6ES7407-0KR02-0AA0 |
| DC input rated voltages | 120 / 230 V DC |
| AC input rated voltages | 120 / 230 V AC |
| Rated line frequencies | 50 / 60 Hz |
| Permissible frequency range | 47–63 Hz |
| Mains buffering time | 20 ms |
| Input current at 120 V DC | 1 A |
| Input current at 230 V DC | 0.5 A |
| Input current at 120 V AC | 0.9 A |
| Input current at 230 V AC | 0.5 A |
| Inrush current | 63 A maximum |
| Inrush pulse full width at half maximum | 1 ms |
| Leakage current | 5 mA maximum |
| Backplane output voltages | 5 V DC / 24 V DC |
| 5 V backplane output current | 10 A maximum; no base load required |
| 24 V backplane output current | 1 A maximum; idling-proof |
| Typical active input power | 95 W |
| Typical power loss | 20 W |
| Optional backup battery voltage | 3.6 V |
| Optional backup battery capacity | 2.2 Ah |
| Optional backup battery quantity | 1 lithium AA |
| Required rack slots | 2 |
| Primary-to-secondary isolation | Provided |
| Overvoltage category | II |
| Equipment protection class | I, with protective conductor |
| Operating temperature | 0–60 °C |
| Connection conductor cross-section | 3 × 1.5 mm² |
| Permissible cable outer diameter | 3–9 mm |
| FM temperature classification | T4 at Ta 0–70 °C |
| Line harmonic standards | IEC 61000-3-2 / IEC 61000-3-3 |
| Output short-circuit protection | Provided |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6ES7407-0KR02-0AA0 is the SIMATIC S7-400 PS 407 power supply for redundant use. It accepts the specified AC or DC mains supply. The module provides the rack backplane with regulated DC power. Its principal backplane output is rated for 10 A. An optional battery supports the corresponding backup arrangement.
The 6ES7407-0KR02-0AA0 belongs in a compatible S7-400 rack configuration. It supplies controller and module electronics through the backplane. The redundant-use version must be selected to suit the installed rack and power concept. Protective earthing and correct mains connection remain essential during installation. Maintenance planning should include the battery arrangement and the existing power-supply configuration.
Supplies compatible S7-400 modules through the backplane.
Supports the specified redundant power concept in an appropriate S7-400 configuration.
Replaces a matching PS 407 redundant supply after checking rack and mains requirements.
Yes. This order number identifies the redundant-use power supply; verify the associated rack configuration.
The 5 V output requires no base load and the 24 V output is idling-proof.
It is optional; determine the battery requirement from the installed backup arrangement.
Check the mains selection, conductor connection and protective earth against the installed system.
Ask Jim for actual-item photographs, the stated condition and available inspection details. The quoted warranty is 12 months under the agreed terms.
Confirmed in-stock goods are dispatched immediately after payment is received. Courier and tracking information are supplied after shipment.
Germany – A Germany customer urgently needed a replacement for a discontinued automation component. After reviewing the product label, technical parameters, and application details, our engineers recommended a compatible alternative and provided photos and test videos before shipment. The alternative performed well, enhancing the customer's confidence in our technical capabilities and leading to multiple repeat orders.
India – An Indian customer still had doubts after initial online communication with us, so they visited our company in person for a face-to-face meeting and product inspection. This visit increased the customer's trust and led to the successful placement of their first order. Over the next few years, we completed multiple orders and established a stable, long-term partnership.
Malaysia – A Malaysia customer needed a specific automation component and compared products and services from several suppliers online. After nearly three weeks of careful consideration, our sincere communication, professional service, and reliable product quality won the customer's trust. After receiving the product and using it for several weeks without any problems, the customer gave us positive feedback and subsequently placed multiple orders.
| MTL5582B | UCS-52 | DDMC802 |
| IRDH275-435 | EY-IO572F001 | EVD0000E51 |
| HWS600-48 | PGDT04000F020 | EVDCU00E21 |
| TIS-DMX-48 | PCO3010AL0 | MCW-211-SM-LC15 |
| PGD1RH0F00 | PCO3000ES0 | PGD0000W00 |
| MTL5531 | MTL4031 | EY-IO551F001 |
| Mtl45/46/5500 | MTL-FS32 | DMC-C 6504086 |
| MTL4513 | MTL4599N | MTL5032 |
| D320DIM1624D | RM8I KNX 4940215 | SF230A-S2 |
| C2IR-8 6500429 | D5014S | BN5930.48 |
| PS00B02KNX | PCO3000AS0 | PCO5000000AS0 |
| 88974041 M3 CD12- 8I/4O | DM03C02KNX | MTL5546Y |
| DDBC1200 | DM4T KNX 4940275 | DDRC1210FR |