ALL PRODUCTS

Siemens 6FC5370-0AA00-1AA1 SINUMERIK 802D sl T/M Value CNC Operator Panel

Siemens 6FC5370-0AA00-1AA1 SINUMERIK 802D sl T/M Value CNC Operator Panel

Product Name: SINUMERIK 802D sl T/M Value CNC Operator Panel

Brand Name: Siemens

Model Number: 6FC5370-0AA00-1AA1

Place of Origin: China

Warranty: 12 Months

Whatsapp: +86 18020776782

Email: [email protected]

Appurtenance:

siemens 6fc5370 0aa00 1aa1 sinumerik 802d sl t m value cnc operator panel-1

Overview
Machine Integration
Description
Service Recovery
Specifications
Commercial Term
Contact info
FAQ
Other Products
Recommended Products

Integrated CNC operator panel for turning and milling with NC, PLC, HMI and SINAMICS drive control

The SINUMERIK 802D sl T/M value version combines the NC, PLC and HMI with control for three SINAMICS axes and one spindle. Siemens supplies the product as a discontinued spare and identifies no repair path.

CNC recovery gate: Match the exact T/M value edition, machine software, NC and PLC archives, drive topology, three-axis and one-spindle configuration, tool and offset data, operator-panel wiring and available toolbox before purchase.

Machine Integration

The order number identifies a specific 802D sl value edition; the machine archive and drive topology determine whether the spare can be commissioned.

Edition check

Confirm T/M value rather than plus, pro or G/N and list every licensed or unavailable function used by the machine.

Axis topology

Record the three axes, spindle, feedback devices, SINAMICS topology, limits and machine-panel signals.

Archive scope

Save NC, PLC, HMI, drive, tool, offset and machine-data archives plus the last known-good series-startup file.

Description

6FC5370-0AA00-1AA1 is the export T/M value version of the SINUMERIK 802D sl. It is not the T/M plus, T/M pro or G/N version, and functions or licenses available in those variants must not be assumed.

Before replacement, create complete series-startup and machine archives and record the machine-data, PLC, HMI, drive and fieldbus state. The commissioning test must begin with safe axis inhibition and confirm feedback, limits and spindle behavior before motion.

Service Recovery

Use a staged recovery because Siemens lists the product as discontinued and without an identified repair path.

Safe installation

Isolate power, document connectors and protective earth, and prevent machine motion until the control and drives are verified.

First startup

Restore the approved archive, review all NC, PLC, HMI and drive alarms and confirm the expected hardware and software versions.

Motion acceptance

Test feedback, limit circuits, axis direction and spindle response at an approved low-risk operating point before production release.

Specifications

Product type designation	SINUMERIK 802D sl T/M value
Order number	6FC5370-0AA00-1AA1
Application	Turning and milling machines
Integrated functions	NC, PLC, HMI and SINAMICS drive control
Controlled axes / spindle	3 axes / 1 spindle
CNC user memory	512 KB for the value version
Channels / mode groups	1 / 1
Variant	T/M value, export version
Included support media	Logbook and toolbox
Lifecycle status	Discontinued spare part; no identified repair
Net weight	Approx. 6.8 kg
Country of origin	China

Commercial Term

Quotation

Current price and availability

Payment

T/T or agreed terms

Lead time

Confirmed with quotation

Shipping

DHL, FedEx, UPS or agreed freight

Warranty

12 months

Contact info

CONTACT

Jim Pei

[email protected]

+86 180 2077 6782

FAQ

Can 6FC5370-0AA00-1AA1 be substituted with a T/M plus or T/M pro panel without reviewing the machine project?

No. The value, plus and pro editions have different function and memory scopes. Confirm the exact edition, CNC software, machine licenses, axis and spindle use, drive topology and archived commissioning data before any substitution.

What should be archived before replacing 6FC5370-0AA00-1AA1 on a working machine?

Create verified NC, PLC, HMI, drive, tool, offset and machine-data backups and retain the series-startup file, logbook and toolbox. Record software versions, active licenses, fieldbus layout and every connector position.

Why can 6FC5370-0AA00-1AA1 boot normally while the SINAMICS axes remain unavailable?

The operator interface can start even when the drive topology, feedback devices, enable chain or restored drive data does not match. Review the first NC and drive alarms, compare the topology and verify safe enabling conditions.

How can I confirm that 6FC5370-0AA00-1AA1 matches a three-axis turning or milling machine?

Check the nameplate and archive for the T/M value edition, then compare the configured three axes and one spindle, machine-panel signals, feedback devices, drive hardware and required functions with the installed machine.

What service approach is appropriate when Siemens lists 6FC5370-0AA00-1AA1 with no identified repair?

Plan a verified spare exchange rather than an undocumented board repair. Preserve all archives and machine evidence, inspect wiring and earth connections, restore only approved data and perform a staged acceptance test with motion inhibited first.

How should an option or licensing alarm be investigated on 6FC5370-0AA00-1AA1?

Confirm that the function is supported by the T/M value edition and that the archived license and machine data belong to this control. Compare the official function matrix before enabling options or importing data from another 802D sl variant.

Other Products

60-690-02	CS540 84693-03	MS-VMA1615-0
60-692-20	DCJ4501-01PLF PSU-350-AC	PSI-MOS-RS232/FO
60-692-21	60-716-0B	T8312 5020-201
CS60 39159-02	ABB 3BSE008516R1 AI810	ABB 3BSE008520R1 AI835
TM3TI4DG TM3-4	RS485	PDITE-SMRTVUE-01
PL-528-16-V	TIS-DMX-48	ABB 1SAP240600R0001 DC522
ABB 1SAP250600R0001 1SAP212200R0101	AEG 676102.0	EZV516
CPO-MMI-WL	EPS1 520010	C55553-0001 DC-3000
DM92	SR2 B121B	PCS095.s
3256-50	LV429571 4P4D NSX100B TM80D	3VT1792-2EJ46-0AA0