Home > Products > SIEMENS > SIMATIC S7 Series
|
Complete model
|
6ES7155-5AA01-0AB0
|
|
Product family
|
SIMATIC ET 200MP IM 155-5
|
|
Product type
|
IM 155-5 PN ST PROFINET interface module
|
|
Hardware status
|
FS01
|
|
Firmware version
|
V4.1.0
|
|
System capacity
|
Up to 30 S7-1500 or ET 200MP I/O modules
|
|
Supply voltage
|
24 V DC; permissible range 19.2 to 28.8 V
|
|
Current consumption
|
0.2 A rated without load; 1.2 A maximum
|
|
Inrush current
|
9 A maximum
|
|
Backplane bus infeed
|
14 W
|
|
Power loss
|
4.5 W typical
|
|
PROFINET interface
|
1 interface with 2 integrated switch ports
|
|
Connector
|
2 fixed RJ45 Ethernet ports
|
|
Transmission
|
100BASE-TX, 100 Mbit/s full duplex
|
|
PROFINET services
|
IO Device, IRT, MRP client, Shared Device
|
|
Shared Device
|
Up to 2 IO controllers
|
|
Isochronous cycle
|
250 us minimum; 4 ms maximum
|
|
Address space
|
256 bytes per module; 512 bytes per station for inputs and outputs
|
|
Protection / isolation
|
PROFINET separated from other circuits; 1,500 V AC type test
|
|
Operating temperature
|
-25 to 60 deg C horizontal; -25 to 40 deg C vertical
|
|
Installation altitude
|
Up to 5,000 m; restrictions above 2,000 m
|
|
Dimensions
|
35 x 147 x 129 mm (W x H x D)
|
|
Weight
|
Approximately 0.28 kg
|
|
Engineering
|
TIA Portal V15 or GSDML V2.3
|
|
Approvals
|
FM, CCC-Ex, maritime approvals, PROFINET
|
|
Integrated switch
Two fixed RJ45 ports provide an integrated 100BASE-TX switch.
|
Station expansion
Supports up to 30 I/O modules with an additional system power supply.
|
|
Isochronous operation
IRT and isochronous cycles from 250 us to 4 ms are supported.
|
Shared Device
The interface can be shared by up to two IO controllers.
|
|
Power input
24 V DC nominal with a 19.2 to 28.8 V permissible range.
|
PROFINET ports
Two fixed RJ45 ports support 100 Mbit/s full-duplex operation.
|
|
Addressing
Up to 256 bytes per module and 512 bytes per station for input and output data.
|
Protocols
PROFINET IO, TCP/IP, SNMP, LLDP, MRP, and PROFIsafe are supported.
|
|
Status LEDs
RUN, ERROR, MAINT, and two LINK TX/RX indicators are provided.
|
Diagnostics
Alarms and diagnostic functions are supported.
|
|
Electrical isolation
PROFINET is isolated from all other circuits with a 1,500 V AC type test.
|
Network profile
PROFINET Security Class 0 and network loading class 3.
|
|
Module dimensions
35 x 147 x 129 mm; official net weight is approximately 0.28 kg.
|
System placement
The integrated supply feeds 14 W to the backplane bus; an additional system supply may be placed to the left.
|
|
Mounting orientation
-25 to 60 deg C horizontally and -25 to 40 deg C vertically.
|
Module replacement
Hot swapping during operation is not supported.
|
|
Q1. How can I verify that the quoted item is exactly 6ES7155-5AA01-0AB0?
Match the complete order number on the quotation, label, packaging, and invoice. Confirm IM 155-5 PN ST, FS01, two fixed RJ45 ports, and the 35 mm housing.
|
|
Q2. How can I distinguish a new IM 155-5 from a used or refurbished unit?
Request current photos of the label, housing, RJ45 sockets, rail latch, power contacts, and packaging. Check for insertion marks, damaged latches, connector wear, replaced labels, or resealing.
|
|
Q3. How should a buyer verify that the supplier is legitimate and reliable?
Confirm the supplier legal identity, registration, address, business contact details, and bank beneficiary. Request references for ET 200MP interface modules and verify that all documents identify 6ES7155-5AA01-0AB0.
|
|
Q4. Which specifications should an engineer verify before purchasing?
Confirm 24 V DC supply, two fixed 100BASE-TX RJ45 ports, 30-module capacity, 250 us IRT minimum cycle, MRP and Shared Device requirements, TIA Portal V15 compatibility, and 35 x 147 x 129 mm dimensions.
|
|
Q5. What physical evidence should be requested before payment?
Request timestamped photos or video showing the complete 6ES7155-5AA01-0AB0 label, both RJ45 ports, power and backplane contacts, rail latch, housing condition, and Siemens packaging.
|
|
Q6. Can another IM 155-5 suffix replace 6ES7155-5AA01-0AB0?
Not automatically. A different suffix can change module capacity, port type, redundancy, IRT timing, firmware, or engineering requirements. Confirm the complete order number and ET 200MP station design before substitution.
|
|
ETU27
|
7PA30321AA001TRIP
|
PC-E984-265
|
|
HH611PL4C
|
12.1600 605 0056 R0002
|
3RT2526-1AL20
|
|
1014K 60-1739-01
|
ECM-77BC
|
STREL-B 6501074
|
|
GE 323A3347P5
|
GJD-03R
|
KJ4110X1-BA1 12P1867X012
|
|
ARK 3382
|
DDM-163
|
UPort1150 RS232/422/485
|
|
PD3120
|
DDFCUC024
|
301ST
|
|
SC90AF021
|
A16B
|
CPM-51-A1V5-I-2-NN-AD
|
|
DH6021H
|
EA7-T6CL+10Y19B108
|
3RV2901-1A
|
|
CLV422-0010
|
SG-TL70-Y
|
SX2 J4290-0001C
|
|
ABB 2CDG 110 082 R0011
|
ABB CP-24/1.5
|
ABB 2CL0813041ABB
|
|
CC-TAIX11
|
0007-000001-01 NS3-C
|
CP-DSKCH-7925G
|
|
SB-6BS-EU/BG
|
IO113
|
FSP-851
|
|
MILLENIUM3 CD12
|
JL086A
|
LIS-AV 26348
|
|
PT220-256L-DNET
|
ABB GJR2240900R0001 XV370A-E 9024/021
|
ABB TTF300-L2C4/OPT
|
|
41B
|
BUM2-SDL-ENIF
|
MIX4
|
|
501MA
|
DPC 8015
|
VC8506
|
|
4495B
|
RM-4E / 0311-0206-01
|
431425-PR
|
|
TXM1.6R
|
7700ADA7
|
TZN4L-24R
|
|
DH 100
|
pdrc816FR-knx
|
5WG1 532-1DB51
|
|
LOP5B-1 55503684
|
HBW2GR3V
|
SA-S-T1
|
EN
