ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7136-6AA00-0CA1 F-AI 4xI Fail-Safe Analog Input Module

Siemens SIMATIC ET 200SP 6ES7136-6AA00-0CA1 F-AI 4xI Fail-Safe Analog Input Module

Siemens SIMATIC ET 200SP F-AI 4xI HF

Complete Model

6ES7136-6AA00-0CA1

Official Product Description

SIMATIC ET 200SP fail-safe analog input module F-AI 4xI 0(4) to 20 mA 2-/4-wire HF for applications up to PL e and SIL 3.

CORE FEATURE: Four-channel fail-safe current input module with 16-bit conversion for PL e and SIL 3 applications.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simatic et 200sp 6es7136 6aa00 0ca1 f ai 4xi hf-1

Overview
Technical Data
Inquiry
Applications & Features
Interfaces
Installation
Environment
FAQ
Recommend Models
Recommended Products

Product Overview

6ES7136-6AA00-0CA1 is a Siemens SIMATIC ET 200SP F-AI 4xI HF fail-safe analog input module for current measurement in safety applications.

It provides four 0 to 20 mA or 4 to 20 mA input channels for two-wire and four-wire transducers with 16-bit conversion including sign.

The module supports safety functions up to PL e, Category 4 and SIL 3 when installed, parameterized and validated within an approved safety architecture.

Technical Data

Complete model	6ES7136-6AA00-0CA1
Brand	Siemens
Product family	SIMATIC ET 200SP
Product type	F-AI 4xI 0(4) to 20 mA 2-/4-wire HF fail-safe analog input module
Analog inputs	4 current inputs
Measurement ranges	0 to 20 mA; 4 to 20 mA
Transducer connection	Two-wire and four-wire
Input resistance	125 ohms
Maximum permissible input current	35 mA
Conversion method	Sigma-delta
Resolution	16 bits including sign
Integration time	20 ms or 16.667 ms
Interference suppression	50 Hz or 60 Hz
Basic error	0.1 percent
Operational error	2 percent
Rated supply	24 V DC
Permissible supply range	19.2 to 28.8 V DC
Rated current consumption	0.38 A
Maximum current consumption	0.4 A
Typical power loss	2 W
Transducer supply	300 mA total maximum
Cable length	1,000 m shielded
BaseUnit	BU type A0 or A1; color code CC00
Address space	14 input bytes and 5 output bytes
Engineering	TIA Portal V15 with HSP 0203
Safety level	PL e, Category 4, SIL 3
Dimensions	15 x 73 x 58 mm, width x height x depth
Weight	48 g
Operating temperature	0 to +60 degrees C horizontal; 0 to +50 degrees C vertical
Official sources	Siemens exact product data sheet; ET 200SP F-AI 4xI HF Manual A5E41448857-AB

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications & Features

Fail-safe analog acquisition

Four current channels can be used in approved safety functions up to PL e and SIL 3.

Flexible current ranges

Each configured channel supports the exact module ranges of 0 to 20 mA or 4 to 20 mA.

High-resolution conversion

Sigma-delta conversion provides 16-bit values including sign with selectable 50 or 60 Hz interference suppression.

Integrated transducer supply

The module supports compatible two-wire and four-wire transducers with up to 300 mA total sensor supply current.

Interfaces

Analog channels	Four current input channels for two-wire or four-wire transducers.
Measurement ranges	0 to 20 mA and 4 to 20 mA, configured per Siemens instructions.
BaseUnit	Use an approved ET 200SP BU type A0 or A1 with color code CC00.
Process image	14 input bytes and 5 output bytes for the current engineering configuration.
Field cable	Shielded signal cable up to 1,000 m under Siemens installation conditions.

Installation

01 - Verify the exact module

Match 6ES7136-6AA00-0CA1 on the quotation, Siemens label and packaging.

02 - Select approved hardware

Confirm the ET 200SP interface module, BaseUnit A0 or A1, color code CC00 and safety engineering release.

03 - Plan each channel

Define 0 to 20 mA or 4 to 20 mA, two-wire or four-wire connection, sensor supply and the required safety evaluation.

04 - Install and wire

Mount the 15 mm module, use shielded cable and observe the exact terminal assignments and 35 mA input limit.

05 - Parameterize and validate

Configure with the supported TIA Portal release, test diagnostics and complete application-specific safety validation.

Environment

Horizontal operation

0 to +60 degrees C.

Vertical operation

0 to +50 degrees C.

Safety application

Up to PL e, Category 4 and SIL 3 when the full safety function meets Siemens requirements.

Signal cabling

Use shielded cables and the specified grounding and equipotential-bonding arrangement.

Installation system

Operate only within a compatible SIMATIC ET 200SP station using approved safety components and engineering software.

FAQ

Q1. How can the exact quoted 6ES7136-6AA00-0CA1 be verified?

Match 6ES7136-6AA00-0CA1 on the quotation, Siemens label and box. Confirm F-AI 4xI HF, four 0(4) to 20 mA channels, BU A0/A1 and CC00.

Q2. How can New, Used or Refurbished condition be distinguished?

Request date-marked photos of the label, front wiring area, BaseUnit contacts, housing and packaging. Check for terminal scratches, worn contacts, repaired plastic, replacement labels and configuration residue.

Q3. How should supplier legality and reliability be checked?

Verify the supplier registration, address, beneficiary account and traceable contact. The offer must state Siemens, 6ES7136-6AA00-0CA1, condition, quantity and the exact F-AI 4xI HF description.

Q4. Which specifications must engineering confirm before purchase?

Confirm four current inputs, 0 to 20 or 4 to 20 mA ranges, two-wire or four-wire sensors, 125 ohm input, BU A0/A1, 14 input and 5 output bytes, TIA Portal support and PL e or SIL 3 design.

Q5. What physical evidence should be requested before payment?

Ask for date-marked photos showing the full model label, front terminal diagram, BaseUnit contacts, seals and box label. The -0CA1 suffix and F-AI designation must be readable.

Q6. Can another F-AI suffix replace 6ES7136-6AA00-0CA1?

Not automatically. Different suffixes can change channel type, hardware revision, approvals, BaseUnit assignment or safety certification. Validate the exact Siemens data and safety project before substitution.

Recommend Models

XP 300	1492-SPM1B100	KN-F10L24DC
SFF4,H1863	CSI 2130 /B213000	ABB PM864AK02 3BSE018164R1
TS2036W	PT878-01	KD5-SYM120.3SF1S01
XL34-2K5A2	1417P-PSI	WMZS3D25
42FB-F2LNA-A2	M6000 M6511XVP-jf0-C0U & SFM-2-P	PN:150-F480NBD
1778-IBC	PB01225M1C 8017664	JFD-2000A
1492-JG6	9001K36	E32-DC200B
1492-WTF3	60313995	IV8435P
MDM300	DS3800HVDB1K1G / 6BA06 C-ESS	LC1D098BD
NKTU11-14	GE VMIVME-7807RC	1614-0878-00
MAX-720 MAX-720C-Q1-EA-EI	Ni8U-EM12-AP6X	1492-AIFM8-3
NSYTRAC22	6310 2ZJEM	1400-2-M
Is200tbtch1b	809-6590	GE 6128785
1734-IB8	ACH580-01-206A-4+J400	Y150T
DF868 / DF868-2-14-10000-0	DN-Q12-2-2-A	PQI-300
9905-866	EM-038	3RQ3118-2AB01
20-TT-TEX/TEX	J802754	SL-VP15P-R
2322427 VIP-3/SC/HD44SUB/F	7700-44711-S4U0750	4L470
ABB PM864AK01 3BSE018161R1	APM2	MOD32BNS
BL5005	R50-5	D45127