Home > Products > SIEMENS > SIMATIC S7 Series
|
Complete model
|
6ES7517-3HP00-0AB0
|
|
Product family
|
SIMATIC S7-1500H - CPU 1517H-3 PN
|
|
Product type
|
Redundant central processing unit
|
|
Dimensions
|
210 x 147 x 129 mm
|
|
Weight
|
Approx. 2,094 g; interface modules 2 x 18 g
|
|
Supply voltage
|
24 V DC (19.2 to 28.8 V DC)
|
|
Current consumption
|
Rated 1.5 A; maximum 1.9 A
|
|
Power loss
|
Typically 24 W
|
|
Work memory
|
2 MB for program; 8 MB for data
|
|
Memory card
|
SIMATIC Memory Card required; maximum 32 GB
|
|
Bit processing time
|
Typically 4 ns
|
|
PROFINET interfaces
|
Two interfaces: X1 with 2-port integrated switch; X2 with 1 port
|
|
H-SYNC interfaces
|
Two pluggable fiber-optic synchronization interfaces
|
|
Ethernet
|
100 Mbps with autonegotiation and autocrossing
|
|
Connections
|
Maximum 320 connection resources
|
|
System redundancy
|
PROFINET S2 and R1 supported
|
|
Media redundancy
|
MRP supported via interface X1
|
|
Operating temperature
|
Horizontal installation: 0 to 60 deg C; vertical installation: 0 to 40 deg C
|
|
Storage and transport
|
-40 to 70 deg C
|
|
Installation altitude
|
Maximum 5000 m; restrictions apply above 2000 m
|
|
Firmware and hardware
|
Firmware V3.1; hardware functional status FS06
|
|
Engineering software
|
TIA Portal V19 for firmware V3.1; V15.1 or higher for firmware V2.6
|
|
CONTACT
STELLA
|
|
Redundant CPU
Designed for SIMATIC S7-1500H redundant systems with synchronized CPU operation.
|
Fast execution
Typical processing times are 4 ns for bit operations and 24 ns for floating-point arithmetic.
|
|
Large memory
Integrated work memory provides 2 MB for program and 8 MB for data.
|
Diagnostics
RUN/STOP, ERROR, MAINT, and LINK TX/RX LED indications are provided.
|
|
S2 support
PROFINET system redundancy S2 is supported for redundant controller applications.
|
R1 support
PROFINET system redundancy R1 is supported by this CPU.
|
|
H-SYNC
Two pluggable fiber-optic synchronization modules are supported.
|
MRP
Interface X1 supports MRP and MRP interconnection.
|
|
PROFINET X1
RJ45 Ethernet interface with two ports, integrated switch, and PROFINET IO controller.
|
PROFINET X2
RJ45 Ethernet interface with one port and no integrated switch.
|
|
Synchronization
Two fiber-optic H-SYNC interfaces accept approved synchronization modules.
|
Connections
Up to 320 connection resources are supported through the CPU and connected communication processors.
|
|
Horizontal installation
Permissible operating temperature is 0 to 60 deg C.
|
Vertical installation
Permissible operating temperature is 0 to 40 deg C.
|
|
Storage and transport
Permissible temperature is -40 to 70 deg C.
|
Altitude
Installation altitude is up to 5000 m, with restrictions above 2000 m.
|
|
Q1. How can I verify the quoted item is exactly 6ES7517-3HP00-0AB0?
Match the full Siemens article number on the quotation, nameplate, and packaging. Confirm CPU 1517H-3 PN, 2 MB program memory, 8 MB data memory, X1 and X2 PROFINET, and two H-SYNC interfaces.
|
|
Q2. How can I distinguish New, Used, or Refurbished condition?
Request current photos of the factory label, serial data, FS06 marking, display, X1 and X2 ports, H-SYNC slots, power terminals, housing, and packaging. Require the offered condition in writing.
|
|
Q3. How can I check whether a supplier is legitimate and reliable?
Verify company registration, traceable address, matching bank beneficiary, business contact channels, and a formal quotation listing 6ES7517-3HP00-0AB0 in full with the stated condition.
|
|
Q4. Which specifications should an engineer verify before purchase?
Confirm the 24 V DC supply, firmware and TIA Portal compatibility, S2 or R1 topology, H-SYNC modules, required memory card, 210 x 147 x 129 mm dimensions, 2,094 g weight, and installation temperature.
|
|
Q5. What physical evidence should I request before payment?
Ask for dated photos or video showing the complete 6ES7517-3HP00-0AB0 label, serial data, FS06 or displayed firmware, PROFINET and H-SYNC connections, power connector, seals, and quantity.
|
|
Q6. Can a similar CPU 1517H suffix replace this model?
Do not assume interchangeability. A different suffix can change memory, firmware requirements, redundancy functions, H-SYNC configuration, interface arrangement, dimensions, and engineering compatibility.
|
|
PC1CFZ00-X
|
MC7596-PZCSURWAAWR
|
XFCL3A1
|
|
ABB 1SAP240000R0001 DI524 F0
|
IMDSI02
|
ET901-DC
|
|
RO 8-1.4 C29F
|
KP551
|
03-7060-STADGS1-R1BK
|
|
EVF8201-E
|
80025-551-01-R
|
CBS-4C-RA CBS-4
|
|
CNXAO-8
|
abb sa/s8.10.1 2cdg110041R0011
|
P372
|
|
6SA8252-0AC77
|
Xnv-l6080ra
|
RS2-4TX/1FX 943-754-001
|
|
C-MAP M-IN-M201.07
|
TVQ04
|
S-532-0 UNC532
|
|
NetAXS-123 NXD1-1
|
RK 926 115-an
|
253-TALW | 253-TALW-LAHG-C5-BD
|
|
HLPB04S
|
WV-S1132 i-PRO
|
613560
|
|
74-200012-004
|
MS860 38920-65
|
BEGA 10 554
|
|
MS-A24VD-K1
|
00DN902
|
HC30WB5R1
|
|
116/323
|
1250-0.1FN
|
ZWD020/DM
|
|
E244-16C-G-LS-SC-CR-SQ-BR
|
RZ01 56030100
|
51153745-100
|
|
248RANA
|
3G0755/004
|
BZMC1-A50-BT
|
|
ABB 2CDG120044R0011
|
POL965.00 MT3025
|
MG41E MG41E-HW
|
|
9377-FB
|
DM-FPS-9600-V1-15
|
ABB 1SVR405650R0000
|
|
CCA634
|
ph-pan04.eu
|
CA10-A223
|
|
CPM500/2V
|
ABB SDCS-IOB-21
|
RM-280
|
|
FHS-025
|
FL-PP-RJ45-SC
|
H8186-CB
|
|
50098843
|
KJ1502X1-BD1
|
CAB-HDMI-PHD12XS
|
EN
