ALL PRODUCTS

Siemens SIMODRIVE 611 6SN1118-0NH11-0AA1 Universal E HRS Control Board

Siemens SIMODRIVE 611 6SN1118-0NH11-0AA1 Universal E HRS Control Board

Siemens | SIMODRIVE 611 universal E HRS

6SN1118-0NH11-0AA1

Two-axis control board for SINUMERIK 802D motion control with PROFIBUS-DP

KEY SELECTION: HRS hardware from software version 9.1, two axes, sin/cos 1 Vpp encoder feedback, interchangeable memory module, RS232 and safe start inhibit.

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

siemens simodrive 611 6sn1118 0nh11 0aa1 universal e hrs control board6sn1118 0nh11 0aa1-1

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Protection & Environment
FAQ
Recommend Models
Recommended Products

Siemens | SIMODRIVE 611 universal E HRS

6SN1118-0NH11-0AA1

Two-axis control board for SINUMERIK 802D motion control with PROFIBUS-DP

Official Configuration Two-axis SIMODRIVE 611 universal E HRS control board for SINUMERIK 802D; software and user data are stored on an interchangeable memory module.	Core Selling Point Manufacturer-documented HRS control board with higher computing performance for clock-synchronous drive coupling.
Selection Focus Confirm the complete 6SN1118-0NH11-0AA1 suffix, HRS generation, software version and encoder type before replacement.	Procurement Check Require rating-plate evidence showing 6SN1118-0NH11-0AA1 and confirm the memory module, PROFIBUS option and power-module interface are included as required.

Technical Data

Complete model	6SN1118-0NH11-0AA1
Product family	SIMODRIVE 611 universal E
Product type	Universal E HRS two-axis control board
Official software scope	From software version 9.1
Application	SINUMERIK 802D motion control with PROFIBUS-DP
Axis capacity	2 axes
Encoder feedback	sin/cos 1 Vpp encoders
Memory	Interchangeable memory module for speed setpoint
Parameterization	SimoCom U, front display/operator unit or PROFIBUS-DP
Analog I/O	2 analog inputs and 2 analog outputs per drive
Digital I/O	2 digital inputs and 2 digital outputs per drive
Test points	2 test sockets
Serial interface	RS232
Safety function	Safe start inhibit
Additional measuring system	TTL encoder can be connected
Dimensions	Not separately specified for the control board in the official function manual
Weight	Not separately specified in the official function manual

Inquiry

CONTACT
STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Drive Coupling
Supports clock-synchronous coupling between a PROFIBUS-DP master such as SINUMERIK 802D and the SIMODRIVE 611 universal E DP slave.

Two-Axis Control
Controls two axes using sin/cos 1 Vpp encoder feedback.

Data Retention
Software and user data reside on an interchangeable memory module.

Interfaces

Fieldbus Option
The documented optional PROFIBUS-DP3 module is 6SN1114-0NB01-0AA0.

Local Commissioning
Parameters can be set through SimoCom U or the front display and operator unit.

Service Interface
An RS232 serial interface supports commissioning communication.

Installation

Replacement Procedure
De-energize the power module before removing or installing the control board.

Module Transfer
Transfer the option module and memory module from the replaced board when required by the installation.

Compatibility Check
Verify HRS hardware, software version and power-module compatibility before energizing.

Protection & Environment

Safe Start Inhibit
The official manual identifies a safe start inhibit function; validate the machine safety concept before service.

Cabinet Environment
Operate only within the approved SIMODRIVE 611 cabinet and power-module conditions.

Lifecycle Verification
Because this is a legacy SIMODRIVE product, require exact label, hardware and software evidence.

FAQ

How can the quoted 6SN1118-0NH11-0AA1 be verified?
Match the complete order number and the SIMODRIVE 611 universal E HRS designation on the Siemens rating plate; the -0AA1 suffix identifies the HRS generation documented from software version 9.1.

How can New, Used or Refurbished condition be distinguished?
Request dated photographs of the label, front operator area, connectors, card edges, mounting screws and memory-module bay; disclose repairs, residue, scratches or previous installation.

How should the supplier be validated?
Check the legal entity, bank beneficiary and traceable contact details, and require a written quotation that repeats 6SN1118-0NH11-0AA1 without shortening the suffix.

What should engineers confirm before procurement?
Confirm two-axis sin/cos 1 Vpp feedback, SINUMERIK 802D/PROFIBUS-DP application, software version, memory module, optional PROFIBUS-DP3 module and compatible SIMODRIVE 611 power module.

What evidence should be requested before payment?
Ask for current photographs showing the complete label, memory module, option-module area, RS232 connection, I/O terminals and the board installed or placed beside the quotation reference.

Can 6SN1118-0NH11-0AA0 or another suffix replace it?
Not automatically. The -0AA0 HR and -0AA1 HRS generations differ in hardware and software scope; confirm the machine project and Siemens replacement guidance before substitution.

Recommend Models

6ES7212-1BE40-0XB0	6ES7513-1RL00-0AB0	AI810
TU848	6ES7288-3AQ02-0AA0	6ES7215-1AG40-0XB0
6ED1055-1HB00-0BA2	1756-EN4TR	1756-L63
1756-OB16E	6ES7288-6EC01-0AA0	6ED1055-1MB00-0BA2
6ES7222-1AD30-0XB0	6EP3331-6SB00-0AY0	1756-IB32
6ES7153-4BA00-0XB0	ASI533	PM5670-2ETH
CI862K01	KJ3002X1-BF1	ARS15M
DI831	6ED1055-1MD00-0BA2	ASD143
1756-L81E	TC-FXX132	AAB141
DI825	AFV30S	6ES7322-8BF00-0AB0
DI810	5069-L310ERMS2	6ES7288-2DR08-0AA0
CM575-DN	6ES7654-7HC00-0XA0	6ED1055-1CB10-0BA2
PM865K01	ASD533	PM5072-T-ETH
AAV544	ANB10D	VE3009
1756-IR6I	CC-GDOL11	6ED1055-1NB10-0BA2
TU837	TU846	AAT145
AFV40S	PM5112-R-ETH	AAI543
TU843	6ES7288-5AQ01-0AA0	CC-GAIX11
1756-L83E	DO821	6ES7288-2QR16-0AA0
6ED1052-1CC08-0BA2	SD834	TU841