Complete model |
CI501-PNIO |
Official description |
ABB AC500/S500 CI501-PNIO PROFINET IO RT communication interface module with 4 analog inputs, 2 analog outputs, 8 digital inputs and 8 digital outputs. |
Product family |
AC500 / S500 |
Product type |
PROFINET communication interface module |
Core selection point |
PROFINET IO RT remote I/O interface with 22 integrated I/O channels. |
|
Complete model
|
CI501-PNIO
|
|
Brand
|
ABB
|
|
Order code
|
1SAP220600R0001
|
|
Product family
|
AC500 / S500
|
|
Product type
|
PROFINET communication interface module
|
|
Network role
|
PROFINET IO RT device for decentralized I/O
|
|
PROFINET interface
|
2 x RJ45, integrated switch, 10/100 Mbit/s full-duplex
|
|
PROFINET conformance
|
Conformance Class B; minimum bus cycle 1 ms
|
|
Integrated I/O
|
4 AI, 2 AO, 8 DI and 8 DO
|
|
Analog resolution
|
12 bits
|
|
Digital inputs
|
8 channels, 24 V DC, Type 1
|
|
Digital outputs
|
8 channels, 24 V DC, 0.5 A per channel; 4 A total
|
|
Analog input ranges
|
-10 to +10 V; 0 to +10 V; 0 to 20 mA; 4 to 20 mA; Pt100; Pt1000; Ni1000
|
|
Analog output ranges
|
-10 to +10 V; 0 to 20 mA; 4 to 20 mA
|
|
Process supply
|
24 V DC via UP and UP3
|
|
Current consumption
|
0.2 A via UP; 0.06 A via UP3 plus output load
|
|
Maximum power dissipation
|
6 W
|
|
Input / output data length
|
19 bytes input; 23 bytes output
|
|
Expansion capacity
|
Up to 10 S500 I/O modules
|
|
Required terminal unit
|
TU507-ETH or TU508-ETH
|
|
Mounting
|
35 mm DIN rail, 7.5 mm or 15 mm depth
|
|
Dimensions
|
Approx. 67.5 x 135 x 76 mm with terminal unit
|
|
Weight
|
Approx. 125 g without terminal unit
|
|
Protection rating
|
IP20 when the PLC system is fully assembled
|
|
Operating temperature
|
0 to +60 deg C horizontal; 0 to +40 deg C vertical with output derating
|
|
Storage temperature
|
-40 to +70 deg C
|
|
Humidity
|
Up to 95 %, non-condensing
|
|
Electrical isolation
|
Ethernet interface galvanically isolated from the rest of the module
|
|
Decentralized I/O
Use CI501-PNIO as a PROFINET IO RT device for remote AC500/S500 I/O stations.
|
|
Mixed signal acquisition
Combine voltage, current and RTD analog measurement with 24 V digital input channels.
|
|
Actuator control
Drive eight 24 V DC transistor outputs and two configurable analog outputs.
|
|
I/O expansion
Attach up to ten S500 I/O modules through the local I/O bus.
|
|
Device identification
Set the I/O device identifier with two rotary switches on the module front.
|
|
Engineering data
Use the ABB device description and PROFINET configuration data for the controller project.
|
|
Analog channels
Configure voltage, current, RTD or digital-input functions in software.
|
|
Data exchange
Plan 19 input bytes and 23 output bytes for the integrated channels.
|
|
PROFINET ports
Two RJ45 100BASE-TX ports with an integrated switch support line topology.
|
|
Protocol
PROFINET IO RT with cyclic and acyclic services, DCP, LLDP and MRP client support.
|
|
Terminal connections
Integrated I/O and process supply connect through TU507-ETH or TU508-ETH.
|
|
Diagnostics
LEDs indicate system state, channel status, Ethernet activity, errors and supply voltage.
|
|
Terminal unit
Plug CI501-PNIO into a TU507-ETH or TU508-ETH terminal unit until it locks.
|
|
Mounting rail
Install the terminal unit on a 35 mm DIN rail with 7.5 mm or 15 mm depth.
|
|
Supply
Connect the 24 V DC process supplies UP and UP3 and the common ZP reference.
|
|
Thermal clearance
Do not obstruct natural convection; observe the horizontal and vertical temperature limits.
|
|
Q1. How can the quoted complete model be verified?
Match CI501-PNIO and order code 1SAP220600R0001 on the product label, quotation and packaging. Confirm the PROFINET IO RT interface, 4 AI, 2 AO, 8 DI and 8 DO configuration.
|
|
Q2. How can New, Used or Refurbished condition be distinguished?
Request timestamped photos of the label, two RJ45 interfaces, rotary switches, LEDs, terminal-unit contacts and housing. Wear, contamination, altered labels or repair marks can indicate prior service.
|
|
Q3. How can supplier legitimacy be checked?
Verify the supplier legal entity, address, traceable quotation, invoice beneficiary and written return terms. Require photographs of the exact CI501-PNIO label and 1SAP220600R0001 order code instead of a generic AC500 image.
|
|
Q4. What should an engineer confirm before purchase?
Confirm PROFINET IO RT compatibility, two RJ45 ports, 24 V DC supply, integrated I/O counts, analog ranges, TU507-ETH or TU508-ETH terminal unit and the 67.5 x 135 x 76 mm mounted envelope.
|
|
Q5. What evidence should be requested before payment?
Request timestamped evidence showing the complete label, order code, serial data, RJ45 ports, rotary switches, LED area, terminal contacts and packaging. All identifiers must be readable and consistent.
|
|
Q6. Can a similar suffix replace this model?
Not automatically. The -PNIO and -PNIO-XC variants differ in environmental capability, while other CI5xx variants can change the fieldbus and I/O set. Approve any substitute only after a line-by-line engineering comparison with CI501-PNIO.
|
|
J20M J20T3
|
153SA43AM000058
|
LJ-9768
|
|
DSA-N2E6X2-08AT
|
8WH1020-0AG00
|
WMZT2D04T
|
|
WL11-2P1130
|
435-II/BASIC 4116689
|
FR13E
|
|
V3240809S
|
CNMG190612-TH T9025
|
C49BNG00PY050M
|
|
M10A6-AN
|
PP886 , 3BSE092980R1
|
44C-AAA-GDCA-1KV
|
|
CE3020
|
ABB 3BHE009681R0101 GVC750BE101
|
52AEE2
|
|
PB5322
|
DTFNR164D
|
YG-1 07593TF
|
|
313C590G14
|
LRB526032
|
NVFR3100-3FZ
|
|
9WF1224H1D03
|
LE11177
|
10250TC65
|
|
MHSV-4B
|
3SU1401-1BC30-1AA0
|
BES516327A0Y
|
|
BS08A-RD 3PDD1 Y381411
|
PBNV125
|
82A-BC-000-TM-DAAP-1DA
|
|
7205-BECBM
|
P6-60-76
|
M01968
|
|
NK-01-02 10166-R
|
MC-2
|
758-873
|
|
GE IS200WROBH1A IS200WROBH1ABA
|
FYAA3J2-2
|
7SD5221-4DE29-2HJ5/GG
|
|
819-99-D-10 0432HU
|
871TM-DH4NE12-A2
|
GH-15FT3-00B
|
|
V2040ESL20
|
6SE7026-0ED61-Z
|
2947A
|
|
6SE7022-6EC61-Z
|
5SJ41307HG42
|
5000118-698X
|
|
SKF IMx-M 102G
|
Ge DS2020DACAG2
|
1037L
|
|
RSP-150-24
|
MS3108E20-29SW
|
RK4T-6-PSG3M/S1584/SV U2-02896
|
|
889N-F4AF-12F
|
TTR330-47
|
85-15-2135
|
EN
