ALL PRODUCTS

ABB AC500 V3 PM5630-2ETH Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3 PM5630-2ETH Processor Module with Dual Ethernet, Serial and CAN Interfaces | Original New

ABB AC500 V3

PM5630-2ETH

AC500 V3 processor module with 8 MB user program memory, dual independent Ethernet, RS232/RS485 and CAN interfaces, plus an integrated display.

KEY FEATURE: 8 MB user program memory with two independent Ethernet interfaces.

LEAD TIME: In stock WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Functions
Interfaces
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

ABB AC500 V3 PM5630-2ETH

High-performance programmable logic controller CPU module

Product Overview

PM5630-2ETH is an ABB AC500 V3 processor module identified by product ID 1SAP131000R0378. It combines PLC control, communication and diagnostics in one compact CPU.

Key Specifications

24 V DC supply; 8 MB user program memory; 128 MB RAM; 128 MB flash; 300 MHz TI ARM Cortex-A9 processor; minimum instruction times of 0.02 us binary, 0.03 us word and 0.12 us floating-point.

Interfaces and Expansion

Two independent Ethernet interfaces with two RJ45 connectors, one configurable RS232/RS485 serial interface, one CAN interface, optional memory card support and expansion for up to 10 local I/O modules.

Mechanical Data

Net dimensions are 67.5 x 76 x 62 mm (W x H x D). Product net weight is 0.134 kg. The compact module mounts on a dedicated TB56xx-2ETH terminal base.

Ordering Identification

Complete model PM5630-2ETH; ABB product ID and order code 1SAP131000R0378; EAN 4013614570902.

Technical Data

Complete model	PM5630-2ETH
Order code	1SAP131000R0378
Product family	ABB AC500 V3
Product type	PLC CPU processor module
Dimensions	67.5 x 76 x 62 mm (W x H x D)
Weight	0.134 kg net
Supply voltage	24 V DC; permissible range 20.4 to 28.8 V DC
Current consumption	0.110 A typical with module alone; up to 0.400 A typical with all couplers and I/Os
Processor	TI ARM Cortex-A9 32-bit RISC, 300 MHz
Memory	128 MB RAM; 128 MB flash; 8 MB user program memory
Maximum downloadable application	9 MB
Minimum instruction time	0.02 us binary; 0.03 us word; 0.12 us floating-point
Ethernet	Two independent interfaces, two RJ45 connectors; separate MAC addresses; switch operation supported
Serial interface	One configurable RS232/RS485 interface via pluggable spring terminal block
CAN interface	CANopen Master, CAN 2A/2B and J1939 via two 5-pole pluggable spring terminal blocks
Local I/O expansion	Up to 10 local extension modules; up to 320 digital I/Os or 160 analog I/Os
Terminal base	Dedicated TB56xx-2ETH terminal base; TB5600, TB5610 or TB5620 depending on communication-module slot requirement
Engineering software	Automation Builder 2.1 or later
Approvals	Official ABB catalog lists CE, UKCA, RCM, cULus and multiple marine type approvals

Inquiry

CONTACT

STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Functions

Controller performance

Executes IEC 61131-3 control applications with an 8 MB user program area and a 1 ms minimum configurable cyclic task.

Diagnostics and operation

Integrated display and eight function keys provide local diagnosis and status access.

Web visualization

Integrated web server supports CP600 WebVisu HTML5 applications and browser-based visualization.

Interfaces

Dual Ethernet

Two independent Ethernet interfaces can use separate MAC addresses or operate as a two-port switch. Supported services include Modbus TCP, IEC 60870-5-104, DNP3 and licensed industrial protocols.

Serial communication

The internal COM1 interface is configurable for RS232 or RS485 and supports ASCII or Modbus RTU Master/Slave communication.

CAN communication

The internal CAN interface supports CANopen Master, CAN 2A/2B and J1939 protocols.

Installation

Terminal base selection

Install the CPU only on a compatible TB56xx-2ETH terminal base. Select TB5600, TB5610 or TB5620 according to the required number of communication-module slots.

Local expansion

Up to 10 local I/O modules can be connected, with system limits of 320 digital inputs/outputs or 160 analog inputs/outputs.

Connector planning

Provide two RJ45 Ethernet connections, one pluggable serial terminal block and two 5-pole CAN terminal blocks as required by the application.

Compatibility

Engineering environment

Use ABB Automation Builder 2.1 or later for configuration and programming.

Safety system support

The CPU supports AC500-S safety PLC integration and compatible SM560-S safety modules.

Protocol licensing

Verify licenses before specifying Ethernet/IP, IEC 61850, BACnet, KNX IP or other licensed protocol functions.

FAQ

Q1. How can a buyer verify that the quotation is for the exact PM5630-2ETH?

Confirm the complete model PM5630-2ETH and ABB order code 1SAP131000R0378 on the quotation, nameplate and packing label. The offered unit should identify 8 MB user program memory and the two-Ethernet, serial and CAN interface configuration.

Q2. How can New, Used and Refurbished units be distinguished?

Request current photos of the nameplate, housing, display, function keys, RJ45 ports, serial and CAN terminals, terminal contacts and packaging. A New unit should show no mounting, wiring, connector or terminal wear; condition must be documented in writing.

Q3. How should supplier legitimacy and reliability be checked?

Verify the supplier legal registration, physical business address, company payment account, written quotation, return terms and traceable commercial references. Confirm that all documents consistently identify PM5630-2ETH and order code 1SAP131000R0378.

Q4. Which specifications should engineers verify before purchase?

Check the 24 V DC supply range, 67.5 x 76 x 62 mm dimensions, 0.134 kg net weight, 8 MB user program memory, TB56xx-2ETH terminal-base requirement, Automation Builder 2.1 or later, dual Ethernet, RS232/RS485 and CAN requirements.

Q5. What physical evidence should be requested before payment?

Request timestamped photos or video showing the complete PM5630-2ETH label, 1SAP131000R0378 order code, serial number, display and keys, both RJ45 ports, serial and CAN connectors, terminal contacts, housing and sealed packaging.

Q6. Can a similar AC500 CPU or a different suffix replace PM5630-2ETH?

Not automatically. Similar PM56xx CPUs and -XC variants may differ in memory, environmental design, terminal-base compatibility, licenses or supported functions. Approve a substitute only after the complete order code and all electrical, mechanical, interface and software requirements are checked.

Recommend Models

Randomly selected industrial automation models

420-10E	SSM-30-G	AC6JAKS000
BS610-U61-4	SISTF1011-111-LRT	AVAYA 700283690
GE IC693MDL753E	1000DC-PV-ST	AGC/GS/3 100053070.10
2W3A00P1	Tx0D 3020 0JF737 4GF/2GR	GDF 112
9318/12-11-10mA	PRINT-B-MS5.1-IWG4020.3-0/4	6EP1961-3BA21 PSE202U
E50C2A	RS2-4TX/1FX 943-754-001	DSE2157
PSM700	LCM-320	CTRLON4S240
Fg5965-11	6.0308.100	1088440
IQE35-1201U50035 IQE35/24VAC	EB0517 1674194	ABB LR/S 2.16.1
C7973A LTO-3	TT-MJC-30M/100FT-MC-BLK	K9149FF-05 KG149FA
2182-227	3HE04823AAAA01 RTXM228-401-C82	HU-224-2-VDC
XU1DC2	OCMP/16-3/16-3 OCM1240 rev40 PCI8-LX	808613.10
XPSAK361144	I542	025-39956-000
IC200MDD844F	IXA-500DMA	H4L2GR1V
7.640.100	LM24-3-T	GE 323A3347P5
RK-4B	MA1500	5110-00 800-5870-1R
M200 PN. 52121554	BA101011-001-AI/O	EY-RC302F011
5210003-00A REV.A4 CS-LOOP	ST600MP0005 1MJ200-151	REF 1605
P78LCA-9300	7504-1970	MCS-EXV-DRIVER UC-3312
EKA173/5	PMT50Ex-2-AO-2R-00-5-13	ABB PM581