ALL PRODUCTS

Bently Nevada 3300 XL 8 mm 330101-04-36-10-02-05 Proximity Probe | Original New

Bently Nevada 3300 XL 8 mm 330101-04-36-10-02-05 Proximity Probe | Original New

BENTLY NEVADA | 3300 XL 8 MM PROXIMITY TRANSDUCER SYSTEM

330101-04-36-10-02-05

3/8-24 UNF Unarmored 8 mm Proximity Probe with 1.0 m Cable and Multiple Approvals

CONFIGURATION: 3300 XL 8 mm probe | 3/8-24 UNF, without armor | 0.4 in | 3.6 in | 1.0 m (3.3 ft) | Miniature coaxial ClickLoc connector; standard cable | CSA, ATEX and IECEx

LEAD TIME: In stock

WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

bently nevada 3300 xl 8 mm 330101 04 36 10 02 05 proximity probe-1

Overview
Technical Data
Inquiry
Configuration
Applications
Installation
Compatibility
FAQ
Recommend Models
Recommended Products

Bently Nevada 330101-04-36-10-02-05

3/8-24 UNF Unarmored 8 mm Proximity Probe with 1.0 m Cable and Multiple Approvals. The complete ordering identity must remain associated with its documented mechanical, electrical, environmental and approval configuration.

Core selling point: Compact 3.6 in case with 1.0 m standard cable and multiple approvals.

Official source: 141194 Rev. AN, pages 1, 4, 5, 6, 7, 8, 13 and 35. Open datasheet PDF

Technical Data

Complete model	330101-04-36-10-02-05
Brand	Bently Nevada
Product family	3300 XL 8 mm Proximity Transducer System
Product type	Standard-mount proximity probe, without armor
Dimensions	8.0 mm tip; 0.4 in unthreaded length; 3.6 in case; 1.0 m total cable; 3.68 mm cable OD maximum; 7.24 mm connector OD maximum
Weight	Probe weight published as 323 g/m (11.4 oz)
Case thread	3/8-24 UNF
Probe tip material	Polyphenylene sulfide (PPS)
Probe case material	AISI 303 or 304 stainless steel
Cable	75 ohm triaxial FEP-insulated standard cable
Connector	Miniature coaxial ClickLoc
Minimum bend radius	25.4 mm (1.0 in)
Linear range	2 mm (80 mil), approximately 0.25 to 2.3 mm gap
Incremental scale factor	7.87 V/mm (200 mV/mil), plus or minus 5% for a 1 m or 5 m system
Frequency response	0 to 10 kHz, +0/-3 dB
Operating temperature	System performance specifications include probe ranges documented on pages 5-6; probe cable material limits apply
Agency approvals	CSA, ATEX and IECEx

Source: 141194 Rev. AN, pages 1, 4, 5, 6, 7, 8, 13 and 35.

Inquiry

CONTACT STELLA

Email Inquiry [email protected]

WhatsApp +86 18159889985

Configuration

Complete model	330101-04-36-10-02-05
Probe family	3300 XL 8 mm probe
Case thread	3/8-24 UNF, without armor
Unthreaded length	0.4 in
Overall case length	3.6 in
Total cable length	1.0 m (3.3 ft)
Connector and cable	Miniature coaxial ClickLoc connector; standard cable
Agency approvals	CSA, ATEX and IECEx

Applications

Measures radial vibration and axial position on fluid-film bearing machines.

Supports Keyphasor reference and speed measurements when applied according to the system guidance.

The 8 mm tip and 3/8-24 UNF case provide a robust standard-mount probe format.

The 1.0 m lead supports installations requiring more direct probe cable reach than the 0.5 m execution.

Installation

Thread	Install into a 3/8-24 UNF mounting thread.
Thread engagement	Do not exceed the official 0.563 in maximum thread engagement.
Mechanical reach	Verify 0.4 in unthreaded length and 3.6 in overall case length at the machine case.
Cable routing	Maintain the 25.4 mm minimum bend radius for the 1.0 m unarmored lead.
Connector	Finger-tighten the gold ClickLoc connection until it clicks.

Compatibility

Probe family	3300 XL 8 mm proximity transducer system
System length	1.0 m probe-only system execution where selected
Mechanical thread	3/8-24 UNF
Target basis	AISI 4140 steel calibration basis
Exact suffix	04 / 36 / 10 / 02 / 05 defines reach, case, cable, connector and approvals

FAQ

Q1. How can I verify the exact 330101-04-36-10-02-05 configuration?

Match the full label to the official code: 330101 unarmored 3/8-24 UNF probe; 04 = 0.4 in unthreaded length; 36 = 3.6 in case; 10 = 1.0 m cable; 02 = ClickLoc standard cable; 05 = CSA, ATEX and IECEx approvals.

Q2. How can I identify new versus used or refurbished condition?

Inspect the 8 mm tip, 3/8-24 threads, 3.6 in case, unarmored 1.0 m cable and ClickLoc connector. New hardware should not show thread wear, probe-tip impact, cable repair, oil contamination or connector damage.

Q3. How should I verify supplier legitimacy?

Check the legal entity, business address, domain email, bank beneficiary and traceable quotation. Require every document to state 330101-04-36-10-02-05 and the 3300 XL 8 mm family.

Q4. What should an engineer confirm before purchase?

Confirm the 0.4 in unthreaded reach, 3.6 in case, 1.0 m lead, unarmored construction, ClickLoc connector, 05 approvals, 2 mm system linear range and intended system-length execution.

Q5. What physical evidence should be requested before payment?

Request time-stamped photos of the complete model label, 8 mm tip, 3/8-24 threads, case length, full 1.0 m cable, ClickLoc connector and approval marks.

Q6. Can the 0.5 m suffix or another probe replace this one?

Not automatically. The 05 cable option is 0.5 m while this 10 option is 1.0 m, affecting routing and system configuration. Any substitute also requires matching reach, case, connector and approvals.

Recommend Models

6ES7231-4HF32-0XB0	1756-EN2TR	6ES7550-1AA01-0AB0
DA501	6ES7288-2DR32-0AA0	TU835
6ED1055-1CB00-0BA2	6ES7513-1RL00-0AB0	6ES7212-1BE40-0XB0
CI867K01	PM863K01	1756-L84E
SD832	VE3011	6ES7288-1CR60-0AA1
SS823	6ES7288-1CR30-0AA0	1756-L82ES
6ES7288-7ST40-0AA0	ATD5A	TU846
6ES7322-1BL00-0AA0	1769-L30ER-NSE	DI811
TU844	DI840	6ES7212-1AF40-0XB0
CM576-PNIO	6ES7288-6EC01-0AA0	6ES7517-3HP00-0AB0
VE4005S2B4	TU841	6ES7217-1BG40-0XB0
6ES7288-1CR20-0AA0	KJ2005X1-MQ1	6ES7288-1SR40-0AA1
6ES7292-1AG30-0XA0	ADV551	6ES7217-1AG40-0XB0
SD834	1756-L82E	1756-L83EP
VE3051C4	1756-L84ES	PM5052-R-ETH
6ES7407-0DA02-0AA0	6ED1052-1CC08-0BA2	6ES7521-7EH00-0AB0
1756-OW16I	6ES7292-1AH30-0XA0	5069-L310ER
PM5072-R-ETH	ASD533	TU811V1
6ES7654-7HC00-0XA0	CC-PDIL01	5069-L330ER
CI501-PNIO	ANB10S	6ED1055-1FB10-0BA2