ALL PRODUCTS

Siemens SIMATIC ET 200SP 6ES7132-6BD20-0CA0 DQ 4x24VDC 2A High Feature Digital Output Module | Original New

Siemens SIMATIC ET 200SP 6ES7132-6BD20-0CA0 DQ 4x24VDC 2A High Feature Digital Output Module | Original New

SIEMENS SIMATIC ET 200SP

6ES7132-6BD20-0CA0

DQ 4x24VDC/2A HF digital output module

LEAD TIME: In stock | WARRANTY: 1 year

Email Inquiry [email protected]

WhatsApp +86 18159889985

Appurtenance:

Overview
Technical Data
Inquiry
Applications
Interfaces
Engineering
Environment
FAQ
Recommend Models
Recommended Products

SIEMENS SIMATIC ET 200SP

DQ 4x24VDC/2A HF

6ES7132-6BD20-0CA0

6ES7132-6BD20-0CA0 is a four-channel high-feature digital output module for switching 24 V DC loads at up to 2 A per channel.

Exact configuration

The 15 mm module supports channel diagnostics, substitute values, supply monitoring and isochronous operation down to 250 microseconds.

Primary engineering value

Four independently diagnosed 2 A outputs provide a compact 8 A module capacity for demanding distributed-output applications.

Technical Data

OFFICIAL CONFIGURATION DATA

Current Siemens article data for 6ES7132-6BD20-0CA0

DQ 4x24VDC/2A HF digital output module

Complete model	6ES7132-6BD20-0CA0
Product family	SIMATIC ET 200SP
Product type	DQ 4x24VDC/2A HF digital output module
Firmware version	V2.0.3; firmware update supported
Usable BaseUnit	BU type A0
Supply voltage	24 V DC; permissible range 19.2 to 28.8 V
Current consumption	28 mA
Power loss	1 W typical
Digital outputs	4 channels; 2 A per channel; 8 A per module
Switching frequency	Resistive load 100 Hz; inductive load 2 Hz; lamp load 10 Hz
Isochronous operation	Supported; minimum cycle 250 microseconds
Cable length	Shielded up to 1,000 m; unshielded up to 600 m
Diagnostics	Supply voltage, wire break, short circuit, channel and module diagnostics; substitute values supported
Operating temperature	Horizontal: -30 to +60 deg C; vertical: -30 to +50 deg C
Installation altitude	Up to 5,000 m subject to system restrictions
Dimensions	15 x 73 x 58 mm (W x H x D)
Weight	Approximately 30 g

Inquiry

CONTACT

STELLA

Direct product inquiry

Email Inquiry [email protected]

WhatsApp +86 18159889985

Applications

CONTROL APPLICATION PROFILE

Applications

Use cases derived from the official module functions

Actuator control

Switch valves, contactors and other 24 V DC field loads within the 2 A channel rating.

Distributed machinery

Place four high-current outputs close to machine devices in an ET 200SP station.

Diagnostic systems

Use channel and module diagnostics to identify wire break, short-circuit or supply problems.

Synchronized control

Use the supported isochronous mode in appropriately engineered deterministic applications.

Interfaces

SIGNAL AND COMMUNICATION PROFILE

Interfaces

Electrical, network or process-data interfaces

Four outputs

Each 24 V DC channel is rated up to 2 A with a maximum 8 A module load.

Load behavior

Maximum switching frequencies are 100 Hz resistive, 2 Hz inductive and 10 Hz for lamp loads.

Diagnostic feedback

Module and channel diagnostics report supply, wire-break and short-circuit conditions.

Field cabling

Shielded lines up to 1,000 m and unshielded lines up to 600 m are specified.

Engineering

ENGINEERING WORKFLOW

Engineering

Project, configuration and commissioning checks

BaseUnit

Use an ET 200SP BaseUnit type A0 with the correct color-coded terminal assignment.

Load budget

Calculate the simultaneous 8 A module load, conductor sizing and power-group capacity.

Timing

Validate the 250 microsecond isochronous cycle and controller support before enabling synchronized operation.

Commissioning

Test each channel, diagnostic threshold, substitute value and connected load before production use.

Environment

INSTALLATION AND ENVIRONMENT

Environment

Mechanical, power and approved operating conditions

Mounting envelope

Allow 15 mm width, 73 mm height and 58 mm depth; approximate weight is 30 g.

Power conditions

Provide 24 V DC within 19.2 to 28.8 V and coordinate load power separately from module electronics.

Temperature limits

Horizontal: -30 to +60 deg C; vertical: -30 to +50 deg C for the specified hardware status.

Altitude

Operation is specified up to 5,000 m subject to ET 200SP system restrictions.

FAQ

PROCUREMENT AND ENGINEERING CHECKS

Six questions specific to 6ES7132-6BD20-0CA0

DQ 4x24VDC/2A HF digital output module

Q1. How can a buyer confirm the quoted unit is exactly 6ES7132-6BD20-0CA0?

Match the complete article number, DQ 4x24VDC/2A HF designation, four outputs, A0 BaseUnit coding, V2.0.3 firmware and 15 x 73 x 58 mm dimensions against the label and documentation.

Q2. How can New, Used or Refurbished condition be distinguished?

Request dated images of sealed packaging, front and side labels, terminal contacts, rear bus connector and housing. Require disclosure of prior load testing, wiring, repair or firmware update.

Q3. How should the supplier be verified before procurement?

Confirm the legal entity, registered address, payment beneficiary and verifiable automation-module supply record. The offer must state 6ES7132-6BD20-0CA0 and condition.

Q4. Which specifications should engineers verify before purchase?

Check 24 V DC supply range, four 2 A outputs, 8 A module limit, switching frequencies, A0 BaseUnit, diagnostics, substitute values, cycle time, cable lengths, dimensions and temperature range.

Q5. What physical evidence should be required before payment?

Ask for shipment-specific photos or video showing the exact article label, contacts, connector pins, coding element, packaging identifiers and a dated reference tied to the order.

Q6. Can another DQ 4x24VDC suffix replace 6ES7132-6BD20-0CA0?

Not automatically. Output current, diagnostic functions, timing, BaseUnit assignment and firmware integration can differ; validate the exact electrical load and project configuration.

Recommend Models

RECOMMEND MODEL

Random mixed-brand industrial models

Independent 60-model selection for 6ES7132-6BD20-0CA0

SPFEC12	5X00070G01	IMSI23
CE3007	5X00481G04	KJ3102X1-BA1
VE4003S2B6	MAG5000	EJA430E-JHS
MAI5	RBC410	KJ1611X1-BA1
GE4000E	VE4031S2T2B6	KJ4001X1-CB1
5X00453G01	OVATION1C31122G01/1C31125G02	5X00300G02
SPTPS13	3051CG5A02A	EJA110E-DMS
SE4026	mai51	KL3007X1-BA1
EJA120A-EES	EJA110E-DMS4G-917DA	SPSET01
V18345-101U46100N	6DR5020NG000AA0	3051S2CD0A
DSO14	5X00790G0	3051DP3A
2SA7031-0CE2	IEPAS02ABB	VE4013S2B1
KL2101X1-BB1	530E-JBS4N-017DL	EJA110E-JMS4G-717EB/NF
BRC300/SPBRC300	SE5009	NTAI02
1C31224G01/1C31227G0	OCR1100	VE4036P2
EJA430E-JBB	SPIIT13	1C31125G01
530E-JBS4N-012NN	1X01047H01L	SPBRC400
SE4050E2C0	KJ3008X1-BA1	1C31166G02/1C31169G02
NTHS03	5X00357G04	SPCIS22
3051DP2A62A	VE4006P2	5X00502G01