Woodward’s MicroNet Simplex configuration shows each Analog Combo module connected to one Analog Combo Field Terminal Module (FTM) through two Low Density Analog Cables. The FTM provides access to the module I/O, with channels labeled to correspond to software locations.
Analog Combo Module⇄2 × Low Density Analog Cables⇄Analog Combo FTM
Description
Product overview
WOODWARD 5417-040 is identified in the manufacturer’s Industrial Products Catalog as a MicroNet Low Density Analog Cable. The published configuration is gray and 10 ft long (approximately 3.05 m).
Product purpose A manufacturer-identified cable assembly for maintenance replacement or spare-parts requirements where the installed documentation specifies part number 5417-040.
The complete part number is the primary identification point. Cable appearance alone should not be used to approve compatibility.
Specifications
Official specifications
Manufacturer
Woodward
Part number
5417-040
Product family
MicroNet System Cables
Cable classification
MicroNet Low Density Analog Cable
Published length
10 ft (approximately 3.05 m)
Published color
Gray
Official reference
Table G · Woodward Publication 25182 Rev. AG
Features & Benefits
Product features
Exact identification Woodward part number 5417-040 supports traceable BOM and maintenance records.
Defined length The official 10 ft configuration makes routing requirements easier to confirm.
Cable family Cataloged as a MicroNet low-density analog cable rather than a discrete or high-density cable.
Visual reference The gray cable and supplied product images help buyers compare the physical assembly.
Benefit: clearer part-number matching helps reduce incorrect substitutions during sourcing.
Applications
Typical applications
Maintenance replacement Replacement sourcing where the installed cable label or approved BOM identifies 5417-040.
Planned spare Spare-parts planning for a documented MicroNet low-density analog cable requirement.
10 ft cable route Installations whose approved documentation specifies the published 10 ft cable length.
Controlled sourcing Procurement workflows that require manufacturer, part number, length, and catalog traceability.
Use is conditional on the exact installed system documentation; these examples are not a universal compatibility claim.
Installation & Wiring
Installation sequence
01
Isolate equipment Follow the site lockout/tagout and electrical safety procedure before disconnecting cabling.
02
Record the installation Photograph the label, both connector ends, orientation, and existing cable route.
03
Compare the replacement Verify 5417-040, the 10 ft length, and both mating connector arrangements.
04
Route and secure Avoid forcing connectors, excessive strain, sharp bends, or interference with cabinet access.
05
Test before return Have qualified personnel complete the checks required by the applicable Woodward manual.
Safety: installation and testing must follow the system-specific manual and site engineering procedure.
Technical Data Summary
Technical summary
MODEL5417-040
TYPELow Density Analog
LENGTH10 ft
COLORGray
Manufacturer evidence Woodward Industrial Products Catalog 25182 Rev. AG · Table G · MicroNet Low Density Analog Cables.
No additional electrical rating, environmental class, weight, dimensions, or certification is claimed because these values are not provided for 5417-040 in the cited catalog entry.
Contact
Product inquiry
For current availability or technical identification support, send the model, quantity, destination country, and required delivery date. Label and connector photos are helpful when checking an existing installation.
What is WOODWARD 5417-040? It is listed by Woodward as a MicroNet Low Density Analog Cable.
What length and color are listed? 10 ft (approximately 3.05 m) and gray.
Where is the official catalog entry? Table G of Woodward Industrial Products Catalog 25182 Rev. AG.
How should installation compatibility be checked? Match the complete part number, connector ends, route length, installed BOM, and system-specific documentation.
What should I send if identification help is needed? A label photo, photos of both connector ends, quantity, destination country, and required date.
EN
