| Sales | Phone/Whatsapp | |
| Jim Pei | [email protected] | +86 18020776782 |
| Model Number | 6GK5205-3BD00-2AB2 |
| Ethernet Transfer Rates | 10 / 100 Mbit/s |
| Total Network Ports | 8 |
| Copper RJ45 Ports | 5 |
| Multimode Fiber SC Ports | 3 |
| Fiber Port Rate | 100 Mbit/s |
| Console Ports | 1 |
| Console Connector | RJ11 |
| Management Connector | RJ45 |
| Rated Supply | 24 V DC |
| Permissible Supply | 19.2–28.8 V DC |
| Maximum Current | 0.3 A |
| Rated Power Loss | 7.2 W |
| Power Connector | 6-pole terminal block |
| Operating Temperature | 0–60 °C |
| Storage Temperature | -40–70 °C |
| Maximum Humidity at 25 °C | 95%, non-condensing |
| Protection Rating | IP20 |
| Redundant-ring Cascade Limit | 50 switches at reconfiguration below approximately 0.3 s |
| Maximum Ethernet Frame | 1,522 bytes |
| PROFINET Conformance Class | B |
| Network Layer | Layer 2 |
| SNMP Versions | v1 / v2 / v3 |
| VLAN Assignment | Port-based |
| Redundancy Protocols | HRP / MRP / MRP-I / STP / RSTP / RSTP+ |
| Link Aggregation | LACP |
| Multicast Management | IGMP snooping / querier |
| Network Authentication | IEEE 802.1x / RADIUS |
| Industrial Security Certification | IEC 62443-4-2:2019 |
| Interference Emission | EN 61000-6-4, Class A |
| Interference Immunity | EN 61000-6-2 |
| Hazardous-area Marking | Ex nA IIC T4 Gc |
| Minimum Order Quantity | 1 Piece |
| Price | Contact for Jim |
| Packaging Details | Original new Factory Sealed |
| Delivery Time | 3–7 Days |
| Payment Terms | T/T |
| Shipping Method | DHL / FedEx / UPS / TNT |
| Supply Ability | In stock |
Siemens 6GK5205-3BD00-2AB2 is the SCALANCE XB205-3 managed Industrial Ethernet switch with mixed copper and multimode-fiber connectivity. Its port arrangement allows local Ethernet equipment and fiber network links to share the same industrial switching node. The device is supplied with a default PROFINET configuration. Management and diagnostic access support commissioning, traffic inspection and maintenance. Redundancy protocols allow the switch to participate in suitable resilient network designs. Fiber connector type and the intended network profile should be checked before a replacement is selected.
Connects copper field equipment and multimode-fiber segments through a common managed switch.
Integrates into the network using its default PROFINET-oriented configuration.
Supports configured ring and spanning-tree arrangements for the plant topology.
Provides port mirroring and network statistics for fault investigation.
Supports authenticated network access and traffic-limiting functions in the engineered network.
Offers CLI and web management with system logging and port diagnostics.
This article's current Siemens data sheet specifies multimode SC ports; confirm the physical installed connector before replacement.
The specified fiber ports are integrated. Check the fiber type and mating connectors against the exact switch configuration.
No. Confirm the ring protocol, manager role and network settings before connecting the replacement.
Request front-port and label images plus available power and network inspection information.
Provide the required article, port details and destination; confirmed stock is dispatched promptly once payment is received.
Record the switch configuration, firmware and network profile so the replacement can be commissioned correctly.
Most products are covered by a warranty of up to 12 months, subject to the applicable terms and conditions. If any product-related issue occurs during the warranty period, our team will assist you and provide an appropriate solution.
Relevant datasheets and technical literature can be provided with the goods, offering useful information for product identification, installation, operation, and maintenance.
We understand the importance of minimizing equipment downtime. Our team responds promptly to inquiries and provides professional assistance with product information, quotations, order status, shipping, and after-sales questions.
We serve customers worldwide and provide reliable assistance from inquiry to delivery and after-sales service, ensuring clear and timely communication throughout the process.
We continue to source discontinued, obsolete, and hard-to-find automation parts from various brands, helping customers maintain existing equipment and reduce downtime caused by spare parts shortages.
|
SA/S 8.16.5.1
|
ES5D001VST00 ES5D00ETPC00
|
3HE15377AARA01 SFP28 ROHS6/6-40/85C INUIAG2HAA
|
|
IRC5704-MW
|
CP-132UL-I/DB9M
|
POS-M1106
|
|
JZ10-11-T10
|
BM12 RS 616-661
|
HDL-M/R8.16.1-232
|
|
REF.04813
|
PD-10N
|
EC17Z
|
|
CE-AHUKZ-00E.D.1.1.1-1
|
TMD 100A
|
AC2257
|
|
RMC3
|
PD04
|
MC201-1P-1FS
|
|
3-CBLKIT1
|
MX-FP02S
|
SMC-3 150-C9NBR
|
|
EY-IO550F001
|
XJBO3-5921-1
|
TST8804
|
|
WRT-820A 854.125-862.000
|
YPP6000-6R0
|
X2-10GB-LR
|
|
PS24
|
XB7-NA.2
|
APG0001-0701E
|
|
LEM-320
|
Brady 76627
|
LV434010 IFE-E3.16.36
|
|
CAN-5902
|
ULXP4 784-820
|
ECY-S1000
|
|
ECOLINK511 EY-EM511F001
|
TSW-552-BS
|
CES-A-UEA-04B 097075
|
EN
